I have linux server (Red Hat Enterprise Linux Server release 5.3 (Tikanga)) with apache installed. It is already used for browsing some documents. Now I would like to add a new Directory (with a html page), so whenever the directory is browsed it can display the html page.
But I am not sure of where all to edit the httpd.conf file
Existing httpd.conf:
When I hit the url "http://servername/eng" it displays list of folders.
Now, I want to add a website to this existing, so when user hit the url "http://servername/builds" it should display a html page in the browser.I have added my "index.html" page in location "/var/www/html/builds/"
For this I added the below code to httpd.conf file
Please let me know what all modifications are required in the conf file
You can do it in a few different ways.
Putting index.html in /build
This requires you to have this setting:
DirectoryIndex index.html
(it should be there by default on most platform.)
Also for this to work, rather than putting new <Directory>, you should put the build/ directory in the directory that holds your http://example.com/ files. For instance:
/var/www/example.com/public_html/eng/
/var/www/example.com/public_html/builds/
/var/www/example.com/public_html/builds/index.html
Storing build/ in folder completely unrelated to example.com, but still be able to reach it via example.com/builds
For this, you need to rewrite the URLs so that example.com/builds redirects the user to the final URL. This is most easily achieved through mod_rewrite. You enable mod_rewrite module in your Apache's configuration, make sure that example.com can have .htaccess files through ensuring proper AllowOverride entry in example.com's <Directory> configuration, create /var/www//example.com/public_html/.htaccess (or similar) file, and fill it RewriteEngine On and RewriteRules you need. More on mod_rewrite in the Internet and in the documentation.
Completely separate virtual server, for example builds.example.com/
In this case, what you're looking for are virtual servers. These are not defined in httpd.conf or configuration itself, but usually have dedicated directory.
For example, to add builds.example.com that works for port 80, you'd need to create following entry:
<VirtualHost *:80>
ServerName builds.example.com
DocumentRoot /var/www/builds.example.com/public_html/
</VirtualHost>
Where to put this? Well, it depends on the platform. For Debian, you put this in a new file in /etc/apache2/sites-available/, e.g. /etc/apache2/sites-available/example.com, and symlink to it in /etc/apache2/sites-available (on Debian, you can do this easily with a2ensite <NAME_OF_FILE>. On your platform this procedure might be different, so look it up ("adding virtual servers on " would be a start). After adding virtual servers, you need to reload your Apache configuration.
Please let me know if this satisfies your question, if not, I'll edit the answer accordingly.
I have just created a new (test) symfony project and set my apache webroot to /home/user/project/ (not sure if it should be /home/user/project/web/?)
However, from what I understand based on the lightbulb section here: http://symfony.com/doc/current/book/page_creation.html#the-web-directory - there isn't any internal rerouting occurring. Therefore, this does not work:
http://localhost/random/10
but these do work:
http://localhost/app_dev.php/random/10
http://localhost/app.php/random/10
To double check, if I start the internal PHP server (php app/console server:start) then everything gets rerouted correctly - this does work:
http://localhost:8000/random/10
Am I right in thinking that I need to make changes to .htaccess? If so, is there a 'standard' section of code for using apache with symfony?
EDIT:
I have updated my apache2.conf (which for others would be httpd.conf if not on ubuntu as I understand it) as below:
<Directory /home/user/Project/>
Options Indexes FollowSymLinks
AllowOverride All
Require all granted
</Directory>
If I remember correctly, .htaccess alredy defines DirectoryIndex as app.php. However, your Apache config file httpd.conf might be blocking the override.
Make sure that you have that line in your .htaccess and also check the value of AllowOverride (docs) within your httpd.conf. Try setting AllowOverride to All and see if that works.
i m using XAMPP but i m not able to use .htaccess file at local host. i m trying so many times.. Online working good. but local host showing [The requested URL was not found on this server]
My root folder is real
localhost/acre/real/property_available.php
localhost/acre/real/properties
<IfModule mod_rewrite.c>
RewriteEngine On
RewriteBase /acre/real/
RewriteCond %{REQUEST_FILENAME} !-f
RewriteCond %{REQUEST_FILENAME} !-d
RewriteRule ^properties$ /property_available.php/$1 [NC,QSA]
</IfModule>
Please
Just had a similar issue
Resolved it by checking in httpd.conf
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
#
AllowOverride All <--- make sure this is not set to "None"
It is worth bearing in mind I tried (from Mark's answer) the "put garbage in the .htaccess" which did give a server error - but even though it was being read, it wasn't being acted on due to no overrides allowed.
In conf/extra/httpd-vhosts.conf, add the line AllowOverride All for all the websites that you are having problem with
<VirtualHost example.site:80>
# rest of the stuff
<Directory "c:\Projects\example.site">
Require all granted
AllowOverride All <-----This line is required
</Directory>
</VirtualHost>
Try
<IfModule mod_rewrite.so>
...
...
...
</IfModule>
instead of <IfModule mod_rewrite.c>
Without seeing your system it's hard to tell what's wrong but try the following (comment answer if these didn't work WITH log error messages)
[STOP your Apache server instance. Ensure it's not running!]
1) move apache server/install to a folder that has no long file names and spaces
2) check httpd.conf in install\conf folder and look for AccessFileName. If it's .htaccess change it to a file name windows accepts (e.g. conf.htaccess)
3) double-check that your htaccess file gets read: add some uninterpretable garbage to it and start server: you should get an Error 500. If you don't, file is not getting read, re-visit httpd.conf file (if that looks OK, check if this is the only file which defines htaccess and it's location and it does at one place -within the file- only; also check if both httpd.conf and htaccess files are accessible: not encrypted, file access rights are not limited, drive/path available -and no long folder path and file names-)STOP Apache again, then go on:
4) If you have IIS too on your system, stop it (uninstall it too if you can) from services.msc
5) Add the following to the top of your valid htaccess file:
RewriteEngine On
RewriteLog "/path/logs/rewrite.log" #make sure path is there!
RewriteLogLevel 9
6) Empty your [apache]\logs folder (if you use another folder, then that one :)
7) Check the following entries are set and correct:
Action application/x-httpd-php "c:/your-php5-path/php-cgi.exe"
LoadModule php5_module "c:/your-php5-path/php5apache2.dll"
LoadModule rewrite_module modules/mod_rewrite.so
Avoid long path names and spaces in folder names for phpX install too!
8) START apache server
You can do all the steps above or go one-by-one, your call. But at the end of the day make sure you tried everything above!
If system still blows up and you can't fix it, copy&paste error message(s) from log folder for further assistance
I had a similar problem. But the problem was in the file name '.htaccess', because the Windows doesn't let the file's name begin with a ".", the solution was rename the file with a CMD command. "rename c:\xampp\htdocs\htaccess.txt .htaccess"
for xampp vm on MacOS capitan, high sierra, MacOS Mojave (10.12+), you can follow these
1. mount /opt/lampp
2. explore the folder
3. open terminal from the folder
4. cd to `htdocs`>yourapp (ex: techaz.co)
5. vim .htaccess
6. paste your .htaccess content (that is suggested on options-permalink.php)
For windows user, make sure to closely look at this section.
RewriteRule ^properties$ /property_available.php/$1 [NC,QSA]
As said in Apache documentation :
The mod_rewrite module uses a rule-based rewriting engine, based on a
PCRE regular-expression parser, to rewrite requested URLs on the fly.
So ^properties$ means Apache will only look for URL that has exact match with properties.
You might want to try this code.
RewriteRule properties /property_available.php/$1 [NC,QSA]
So Apache will see the URL that has properties and rewrite it to /property_available.php/
I've setup xampp for my localhost as well, I've not done anything with the files created by xampp during or after setup.
But in the '.htaccess' file, make sure you've set it to something like this. Works for me, and this should not make any difference for you.
RewriteEngine On
RewriteRule ^filename/?$ filename.html
Change .html to whatever format you're using.
Make sure your install is clean, and just make the .htaccess file.
Also remember to put one .htaccess file for each directory (don't really know if you can use ONE file for all folders, but to be safe, just do this and it will always work.
Edit the .htaccess file, so the first line reads 'Test.':
Test.
Set the default handler
DirectoryIndex index.php index.html index.htm
...
I'm running the latest Apache Server on Linux Mint 14 and trying to take my first babysteps with vhosts, where I encountered a general problem with my setup:
every option I declare in the <Directory> section doesn't seem to have any effect on any subdirectories - but as far as I know and according to the documentation it should.
For example: I'm trying to give permissions for .htaccess file by
<Directory /var/www/>
AllowOverride All
</Directory>
a .htaccess in /var/www would work properly, but e.g. a .htaccess in /var/www/test with contents "Deny from all" would take no effect.
Are there any options I have to set that I don't know of? This isn't my first apache setup so I'm kind of confused right now, but I can't find a solution.
Thank you in advance!
Got it, apache2.conf includes external vhost settings, so the default settings in sites-available/default kept overwriting mine.
I'm having a difficult time hiding my .htaccess file -- I double-checked to ensure the following was present in httpd.conf:
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>
Other allow/deny directives on directories are working and the directives in the visible .htaccess file are working.
We are running Red Hat Enterprise Linux Server release 6.3 (Santiago) and Apache/2.2.15.
My question: Aside from the obvious of, "Why is the .htaccess file still visible?" Is there some other directive that would override this directive or might I have a module missing? (I would think apache would throw an error if this were the case.)
I restarted apache after any changes to this file and even rebooted as a sanity check. I also made some other changes to this file to ensure that I was working on the correct configuration file.
Have you taken a look at How <Directory>, <Location> and <Files> sections work? It seems that there might be another directive (probably Location) evaluated later, which overrides your Files directive. It's hard to diagnose more without further details of your Apache configuration.