The blue columns is the data given and the red columns is what is being calculated. Then the table to the right is what I am referencing. So, F2 will be calculated by the following steps:
Look at the Machinery column (D), if the cell contains LF, select column K, otherwise select column L
Look at the Grade column (E), if the cell contains RG, select rows 4:8, otherwise select rows 9:12.
Look at the Species column (A), if the cell contains MS, select rows 5 and 10, otherwise.......
Where every the most selected cell is in columns K and L, copy into column F.
Multiply column F by column C.
I don't want to make another column for my final result. I did in the picture to show the two steps separately. So column F should be the final answer (F2 = 107.33). The reference table can be formatted differently as well.
At first, I tried using nested-if statements, but realized that I would have like 20+ if statements for all the different outcomes. I think I would want to use the SEARCH function to find weather of not the cell contains a specific piece of information. Then I would probably use some sort of combination of match, if, v-lookup, index, search, but I am not sure how to condense these.
Any suggestion?
SUMPRODUCT is the function you need. I quickly created some test data on the lines of what you shared like this:
Then I entered the below formula in cell F2
=SUMPRODUCT(($I$4:$I$9=E2)*($J$4:$J$9=LEFT(A2,FIND(" ",A2)-1))*IF(ISERROR(FIND("LF",D2,1)),$L$4:$L$9,$K$4:$K$9))
The formula may look a little scary but is indeed very simple as each sub formula checks for a condition that you would want to evaluate. So, for example,
($I$4:$I$9=E2)
is looking for rows that match GRADE of the current row in range $I$4:$I$9 and so on. The * ensures that the arrays thus returned are multiplied and only the value where all conditions are true remains.
Since some of your conditions require looking for partial content like in Species and Machine, I have used Left and Find functions within Sumproduct
This formula simply returns the value from either column K or L based on the matching conditions and you may easily extend it or add more conditions.
I want to concatenate the value of two columns in the current sheet and then result should be compared with the concatenation of two column value in another sheet.
e.g - The entered value in Column W and X in current sheet after concatenation should be compared with the existing value in column Y and column Z(after concat) of another sheet.
I have tried using the formula COUNTIF(Sheet2!CONCAT($W$2,$X$2:$Y$2,$Z$2),A2)>0 and some different alteration in this but it seems COUNTIF has range and criteria as argument and this is string which is causing error.
If you want to compare, a simple '=' will do.
Concatenation can be done using '&'.
in current sheet:
=W1&X1=Sheet2!Y1&Sheet2!Z1
will return TRUE if both concatenations are equal and FALSE if they are not.
To find the value W1&X1 in the entire range, I suggest you use a help column (unless you are willing to write a macro). In the help column of sheet1, you concatenate the values (=W1&X1 - drag down). In the hlep column of sheet2 you do the same. Then you make an additional column to check for matches, by using
=match(ValueHelpColSheet1,HelpColSheet2,0)
This formula returns the row number in which the match is found and an error when the corresponding value is not found. You can replace this error with something else using IFERROR if you want to.
I need to compare two columns I and L and copy matched result from M column. It is a list of 1000+ product codes (I,L) and EAN codes (M). So if cell I1 is found in range of L1:L1000 (lets say it found in L3 cell), then formula should copy the M3 cell.
Tried VLOOKUP and MATCH and some IF, but cannot figure it out how to make it work as it returns blank or REF! or N/A or errors-out completely. I'm desperate and don't know what i'm doing wrong...
=VLOOKUP(I1:I1164,L1:L1164,13,FALSE)
and with
=IF(ISNUMBER(SEARCH(I1,L1:L1000),M1," "")
Result should be in N column.
When using VLOOKUP, you need the lookup range to include both the range of values you're looking for (which MUST to be the first column) and the return values (whose column you specify as relative to the range. So in your case, you'll be looking up in L1:M1164 and using column 2 as return results (since column M is the second of L1:M1164).
Also, the value you're looking for will probably be just an item, relative to the current line. I'd thus try it that way (in N1):
=VLOOKUP(I1;$L$1:$M$1164;2;FALSE)
Wrapping it up in an IFERROR as suggested in SJR's answer might be a good idea too.
Try this
=iferror(index(m1:m1000,match(i1,l1:l1000,0)),"")
The match bit returns 3, the index bit then looks for the 3rd value in column M; the Iferror returns an empty string in the event of an error (i1 is not found).
I'm having an issue with INDEX + MATCH combination:
=INDEX(ALL!$C$1:$I$1,MATCH(TRUE,ALL!C2:I2<>0,0))
At the moment the aforementioned formula does this job to an extent, where if it finds <>0 value in a row it will return header from this specific column. The issue is that the ROW (as above C2:I2) needs to be specified.
I need to vlookup values in the column "A" in sheet "ALL" and based on that, look at corresponding rows between C:I and if the value in that specific row is <>0 then return heading value.
So, in green I would need a formula to pick up numbers from "Data Source" headings, based on value 1 or any value <>0. I'm guessing it all leads somehow to some sort of "vlookup" hybrid.
Any ideas how to combine vlookup in it?
Thanks
If there can only be one '1' per row, I was thinking of this
=SUMIF(INDEX(B:E,MATCH(G2,A:A,0),0),">0",$B$1:$E$1)
Otherwise if there can be more than one '1'
=INDEX($B$1:$E$1,MATCH(TRUE,INDEX(B:E,MATCH(G2,A:A,0),0)>0,0))
to match the first value greater than zero, in this case entered as an array formula.
A simple =SUMIF() formula will do, no other convoluted INDEX() and MATCH() nested formulas required.
Let's presume we have a data-table that starts at B2 and end at
F6, like this:
So now, to comprehend the solution, here's the syntax of SUMIF() formula (Function):
=SUMIF( range, criteria, [sum_range] )
So, what we want to do is:
go over the range of C3:F3 (and each other respective row)
the criteria to when to sum, is when this range contains 1
and we want to sum_range (sum up) fixed array of numbers, so $C$2:$F$2
So the result is (for row 3):
=SUMIF(C3:F3,1,$C$2:$F$2)
and we drag the formula down, producing expected result:
PS: I think this illustrates the point very well, as to why it's important to declare not only what your formula is doing but also, what you're trying to as in whole as there often is a better (easier) way to implement something, that you might not have thought of.
In other words, follow the Minimal, Complete and Verifiable Example
I am going crazy over this. It seems so simple yet I can't figure this out. I have two worksheets. First worksheet is my data. Second is like an answer key. Upon checking checking, A1:B1 in Sheet 1 is a match with the conditions in Row 52 in SHEET 2, therefore, the value in Column C is "MGC". What is the formula that will perform this function? It's really hard to explain without the data so I pasted a link of the sample spreadsheet. Thank you so much in advance.
sample spreadsheet here. https://docs.google.com/spreadsheets/d/1_AjuNfCdGfEM-XkqPa6W4hSIxQg4NM2Vg4c2C1pQ_vQ/edit?usp=sharing
screenshot here. (wont let me post i have no reputation)
In Sheet2, insert a column in front of Column A and put the formula in A2 =C2&D2.
Then in Sheet1, Cell C2 the formula =vlookup(A2&B2,Sheet2!A:B,2,0).
the first make a concatenated key to lookup, then the second looks up that key.
How about a index(match())? If I've understood correctly you need to match across both the A and B column in sheet one, checking for the relevant values in B and C on sheet 2 to retrun worksheet 2 column a to worksheet 1 column c.
third version try:
=INDEX(Sheet2!$C$1:$C$360,MATCH(Sheet1!A1&Sheet1!B1,Sheet2!$B$1:$B$360&Sheet2!$C$1:$C$360,0))
Basically what this does is use concatenation, the & operator, to specify you are looking for "Criteria A" & "Criteria B" in sheet 1, which makes the string "Criteria A Criteria B", which is supplied in the first part of the match function.
In the second it then says match this against all of my variables in sheet 2 in the same way with concantenation.
The final part of match function (0) specifies you want an 'exact' match
It then supplied this as a reference to the index function, which then finds the row intersecting with the value you want, and returns that.
As noted here https://support.microsoft.com/en-us/kb/59482 this is an array formula, so it behaves differently, and must be input differently. https://support.office.com/en-za/article/Guidelines-and-examples-of-array-formulas-7d94a64e-3ff3-4686-9372-ecfd5caa57c7
There are (at least) 2 ways you could do this without VBA.
USING A SORTED LIST
The first relies on the assumption that your data can be re-sorted, so that everything "Unreported" is in the top, and everything "reported" is together below that (or vice versa). Assuming that this is the case (and it appears to already be sorted like this),we will use the function OFFSET to create a new range which shows only the values that align with either being "Unreported" or "Reported".
Offset takes a given reference to a point on a sheet, and then moves down/up & left/right to see what reference you want to return. Then, it returns a range of cells of a given height, and a given width. Here, we will want to start on Sheet2 at the top left, moving down until we find the term "Unreported" or "Reported". Once that term is found, we will want to move one column to the right (to pull column B from sheet 2), and then have a 'height' of as many rows as there are "unreported" or "reported" cells. This will look as follows in A1 on sheet 1, copied down:
=OFFSET(Sheet2!$A$1,MATCH(A1,Sheet2!A:A,0)-1,1,COUNTIF(Sheet2!A:A,A1),1)
This says: First, start at cell A1 on sheet2. Then find the term in A1 (either "unreported" or "reported", on sheet2!A:A (we subtract 1 because OFFSET starts at A1 - so if your data starts at A1 we need to actually stay at "0". If you have headers on sheet2, you will not need this -1). Then, move 1 column to the right. Go down the rows for as many times as Sheet2 column A has the term found in Sheet1 A1. Stay 1 column wide. Together, this will leave you with a single range on sheet2, showing column B for the entire length that column A matches your term in sheet1 A1.
Now we need to take that OFFSET, and use it to find out when the term in Sheet1 B1 is matched in Sheet2 column B. This will work as follows:
=MATCH(B1,[FORMULA ABOVE],0)
This shows the number of rows down, starting at the special OFFSET array created above, that the term from B1 is matched in column B from sheet2. To use this information to pull the result from column C on sheet 2, we can use the INDEX function, like so:
=INDEX([FORMULA ABOVE],MATCH(B1,[FORMULA ABOVE],0))
Because this would be fairly convoluted to have in a single cell, we can simplify this by using VLOOKUP, which will only require the OFFSET function to be entered a single time. This will work as follows:
=VLOOKUP(B1,[FORMULA ABOVE],2,0)
This takes the OFFSET formula above, finds the matching term in B1, and moves to the 2nd column to get the value from column C in sheet2. Because we are going to use VLOOKUP, the offset formula above will need to be adjusted to provide 2 columns of data instead of 1. Together, this will look as follows:
FINAL FORMULA FOR SHEET1, C1 & COPIED DOWN
=VLOOKUP(B1,OFFSET(Sheet2!$A$1,MATCH(A1,Sheet2!A:A,0)-1,1,COUNTIF(Sheet2!A:A,A1),2),2,0)
OPTION USING ARRAY FORMULAS
The above method will only work if your data is sorted so that the REPORTED and UNREPORTED rows are grouped together. If they cannot be sorted, you can use an ARRAY FORMULA, which essentially takes a formula which would normal apply to a single cell, and runs it over an entire range of cells. It returns an array of results, which must be reduced down to a single value. A basic array formula looks like this [assume for this example that A1 = 1, A2 = 2...A5 = 5]:
=IF(A1:A5>3,A1:A5,"")
Confirm this (and all array functions) by pressing CTRL + SHIFT + ENTER, instead of just ENTER. This looks at each cell from A1:A5, and if the value is bigger than 3, it gives the number from that cell - otherwise, it returns "". In this case, the result would be the array {"";"";"";4;5}. To get the single total of 9, wrap that in a SUM function:
=SUM(IF(A1:A5>3,A1:A5,""))
In your case, we will want to use an array formula to see what row in Sheet2 matches A1 from Sheet1, and B1 from Sheet1. This will look like this:
=IF(Sheet2!$A$1:A$100=A1,IF(Sheet2!$B$1:$B$100,ROW($B$1:$B$100),""),"")
This checks which rows in column A from sheet 2 match A1. For those that do, it then checks which rows in column B from sheet 2 match B1. For those, it pulls the row number from that match. Everything else returns "". Assuming no duplicates, there should only 1 row number which gets returned. To pull that number from the array of results, wrap the whole thing in a MATCH function. Now that you have the row number, you can use an INDEX function to pull the result in Column C with that row, like this:
FINAL ARRAY FORMULA METHOD
=INDEX($C$1:$C$100,MAX(IF(Sheet2!$A$1:A$100=A1,IF(Sheet2!$B$1:$B$100,ROW(Sheet2!$B$1:$B$100),""),"")))
Remember to confirm with CTRL + SHIFT + ENTER instead of just ENTER, when you type this formula. Note that I didn't refer to all of Sheet2!A:A, because array formulas run very slowly over large ranges.
The following formula should work without making any changes to the datasheets.
=INDEX(Sheet2!$A$1:$A$360,MATCH(Sheet1!A1,IF(Sheet2!$C$1:$C$360=Sheet1!B1,Sheet2!$B$1:$B$360),0))
Remember to save this formula as an array with CTRL+SHIFT+ENTER
Documentation on how to use INDEX and MATCH against multiple criteria can be found on Microsoft Support.
It's not clear what you want to do with the multiples that do not have corresponding matches. txed is listed as Unreported twice in Sheet1; kntyctap is listed as Unreported three times. There are only one corresponding match on Sheet2 for each of these.
Non-array Standard Formulas for multiple criteria matches
For Excel 2010 and above use this standard formula in Sheet1!C1:
=IFERROR(INDEX(Sheet2!$A$1:$A$999,AGGREGATE(15,6,ROW(1:999)/((Sheet2!$B$1:$B$999=A2)*(Sheet2!$C$1:$C$999=B1)), COUNTIFS(A$1:A1, A1, B$1:B1, B1))), "")
For version of Excel prior to 2010 use this standard formula in Sheet1!C1:
=IFERROR(INDEX(Sheet2!$A$1:$A$999, SMALL(INDEX(ROW($1:$999)+((Sheet2!$B$1:$B$999<>A1)+(Sheet2!$C$1:$C$999<>B1))*1E+99, , ), COUNTIFS(A$1:A1, A1, B$1:B1, B1))), "")
I've handled error with the IFERROR function in that latter formula. Excel 2003 and previous may have to use an IF(ISERROR(..., ...)) combination.