I want to make a responsive website. Part of that is to enhance my graphics. I have a few PNG flat icons that I would like to convert to SVG but I have no knowledge about Illustrator or any other SVG editor. I've tried an online service called vector magic, but the results are not what I need.
What is the best way to convert my images to SVG?
You should try Illustrator to vectorize your images (there is a function to do this). There will never be a perfect result, so you'll have to correct imperfections.
Here is a link that explains how to do this. You'll have then to save your image in "save as" and change the ai filename (for illustrator) to svg.
Related
I'm trying to edit a vector graphics file from Freepik. The format is EPS and after installing both Inkscape and Ghostscript on Windows, I'm able to open the file with Inkscape. However, Inkscape introduces some weird artifacts (see lines and wrong colors in the picture below).
Side by side comparison, original vector (left) and SVG saved after opening the EPS file in Inkscape (right)
Is there a way to fix this issue?
It's a little difficult to tell, partly because this is a complex illustration and partly because the rendering is a little small. I'd suggest that the circular artefacts are caused by radial fills not being rendered completely.
This could simply be a rendering problem with Inkscape, or it could be that the radial fill has an Extend parameter which isn't being honoured. It could also be a problem calculating a clip.
It's not entirely obvious what you used to render the left hand image, is that Ghostscript ?
Generally I'd say this looks like an Inkscape bug and you should report it as such.
Edit
Reading through the Inkscape FAQ it seems that Inkscape uses SVG as its native format. That's going to mean that an awful lot of PostScript (and PDF) vector objects aren't going to be represented well. Shadings will either have to be rendered to an image or converted into a complex series of SVG primitives.
Following the link on 'How to open EPS files in Windows' from the FAQ suggests to me that EPS files are either rendered to an image or converted to PDF.
You could use Ghostscript to convert the EPS to PDF yourself, and then try loading the PDF into Inkscape to see if you get a better result. You can also open the PDF in, say, Acrobat to see if it looks OK there.
If the PDF looks fine in Acrobat, but not so good in Inkscape, then I'd say that's an Inkscape problem. If the PDF looks poor in Acrobat then that's a Ghostscript problem.
You can then report the problem as a bug to the appropriate site.
It seems that EPS has more capabilities than SVG and that's why some stuff looks weird when converted to PDF/SVG. Specifically, highlights in an EPS file are not properly rendered in an SVG file.
I checked the conversion from EPS to PDF via Ghostscript and the lines are already there, i.e. it's not an Inkscape bug.
Here's the original file to reproduce the problem:
https://www.freepik.com/free-vector/data-processing-factory-isometric-technology_8625296.htm
And here's what it looks like after converting it to PDF: The artifacts are not as noticeable on the PDF file, possibly because Ghostscript converts it with a higher DPI by default
My workaround to be able to edit the file (remove the background) was to:
open the EPS with Inkscape, ungroup the items
delete the background
export it as PNG
then use the PNG as a "mask" on GIMP to edit the JPG file that came together with the EPS.
I have an SVG graphic that I want to put some text on from my PHP variables. The graphic was generated in Illustrator and resizes in my web page to 100% width. Here is a representation of it:
How could this be done for the 8 text items? Does something special need to be done in Illustrator, like creating an anchor point for the text? How do I update the text item? I've done research but haven't been able to find a similar situation.
Thankful for any information that could help me narrow down my search.
Being someone who has never worked with files of .SVG file type before, this was a misunderstanding.
If you design a graphic in Adobe Illustrator, save it as an SVG and edit it with your favorite text editor, you will be able to see the SVG mark-up. It all makes sense now, and here you will be able to change the text at the code-level.
For my application, I saved the SVG as a PHP file and did an include on it, while changing the raw text to PHP variables in said file. This allowed me to pass my dynamic text as variables to the graphic.
I've been doing some stuff in Illustrator and I have a problem with saving a project in to SVG file that I open in webbrowser, It just looks different.
And it hapens only in SVG, if I save it to PDF or PNG it looks how it should.
What am I doing wrong?
That's how it looks in Ai
That's how it looks in webbrowser
Here's a link to download rar file with .ai and .svg that I have.
Since all browsers render it the same way, it would seem likely that this is a bug in the AI SVG export filter.
To me it looks like you are applying a blend mode ("Overlay" perhaps?) to the white parts on top of the image. That effect ought to be reproducible using SVG filters, but perhaps AI's exporter doesn't support that yet.
If you are using an "odd" blend mode, try changing it, or reproducing the effect another way.
Individual pixel control needed in identical svg conversion is not possible. SVG creates only specific shapes. The Ai app conversion seems to use opacity to provide the color shades. You could probably tweek opacity and add some svg filters to improve the svg.
Print your design in a . pdf file instead of exporting it directly. Then open the printed .pdf back in Illustrator and export the .svg from this one, it shoud do the trick.
Would like to take my logo made in illustrator then turn it into a svg so that i can then use Raphael to animate it. I know how to make a simple image by creating my own path using lineTo.
Didn't know if this is possible or not.
Thank you
Once you save your logo created with Illustrator as svg file, there is a way to convert the SVG into a Raphael object and then you can use it with Raphael library.
Chack out this website: http://irunmywebsite.com/raphael/SVGTOHTML_LIVE.php
If you can, open the page with Firefox. Chrome messes up the page. Good Luck.
Well, if its just the path you need without the colors, stroke widths etc, i would save the illustrator logo as an SVG and then open it with a text editor(say Notepad).
From there i would extract the d attribute as a path and manually add the rest of its ''features'' like colors,stroke widths etc.
World Map Images in Adobe Illustrator CS5
I have an image Map in illustrator CS5 which i want to save in GIF so as to reduce its size for web use. But when i save it, the map boundaries are having some white pixels all along the map boundaries of map.
I really dont know why has happened to it, but cant save it in Png-8, png-24 formate due to size constraint.
Any meaningful answer will be highly appreciate and thanks in advance.
Is your background a non-changable color? Maybe you can save the image with the same color as a background.
The problem is gifs don't support true transparency.
If this doesn't work can you provide the image you are trying to save (gif and png, I don't have AI right now)? Maybe there will be something I can do about the size or clearing the gif's edges.
transparent GIFs don't have an 8-bit alpha channel, like PNG does: a pixel in a GIF is either there, or it's not: if it's there, you can't see through it. This often means that an edge between transparent and non-transparent areas looks blocky.
There are two ways to deal with this... either use a PNG 24 (and the Illustrator Save for Web feature will help you to make it smaller), or in Illustrator create a background color layer behind your image before you export to GIF. If this background color layer is the same as the website you put the image on, the edges will blend nicely.