I've been doing some stuff in Illustrator and I have a problem with saving a project in to SVG file that I open in webbrowser, It just looks different.
And it hapens only in SVG, if I save it to PDF or PNG it looks how it should.
What am I doing wrong?
That's how it looks in Ai
That's how it looks in webbrowser
Here's a link to download rar file with .ai and .svg that I have.
Since all browsers render it the same way, it would seem likely that this is a bug in the AI SVG export filter.
To me it looks like you are applying a blend mode ("Overlay" perhaps?) to the white parts on top of the image. That effect ought to be reproducible using SVG filters, but perhaps AI's exporter doesn't support that yet.
If you are using an "odd" blend mode, try changing it, or reproducing the effect another way.
Individual pixel control needed in identical svg conversion is not possible. SVG creates only specific shapes. The Ai app conversion seems to use opacity to provide the color shades. You could probably tweek opacity and add some svg filters to improve the svg.
Print your design in a . pdf file instead of exporting it directly. Then open the printed .pdf back in Illustrator and export the .svg from this one, it shoud do the trick.
Related
I'm trying to edit a vector graphics file from Freepik. The format is EPS and after installing both Inkscape and Ghostscript on Windows, I'm able to open the file with Inkscape. However, Inkscape introduces some weird artifacts (see lines and wrong colors in the picture below).
Side by side comparison, original vector (left) and SVG saved after opening the EPS file in Inkscape (right)
Is there a way to fix this issue?
It's a little difficult to tell, partly because this is a complex illustration and partly because the rendering is a little small. I'd suggest that the circular artefacts are caused by radial fills not being rendered completely.
This could simply be a rendering problem with Inkscape, or it could be that the radial fill has an Extend parameter which isn't being honoured. It could also be a problem calculating a clip.
It's not entirely obvious what you used to render the left hand image, is that Ghostscript ?
Generally I'd say this looks like an Inkscape bug and you should report it as such.
Edit
Reading through the Inkscape FAQ it seems that Inkscape uses SVG as its native format. That's going to mean that an awful lot of PostScript (and PDF) vector objects aren't going to be represented well. Shadings will either have to be rendered to an image or converted into a complex series of SVG primitives.
Following the link on 'How to open EPS files in Windows' from the FAQ suggests to me that EPS files are either rendered to an image or converted to PDF.
You could use Ghostscript to convert the EPS to PDF yourself, and then try loading the PDF into Inkscape to see if you get a better result. You can also open the PDF in, say, Acrobat to see if it looks OK there.
If the PDF looks fine in Acrobat, but not so good in Inkscape, then I'd say that's an Inkscape problem. If the PDF looks poor in Acrobat then that's a Ghostscript problem.
You can then report the problem as a bug to the appropriate site.
It seems that EPS has more capabilities than SVG and that's why some stuff looks weird when converted to PDF/SVG. Specifically, highlights in an EPS file are not properly rendered in an SVG file.
I checked the conversion from EPS to PDF via Ghostscript and the lines are already there, i.e. it's not an Inkscape bug.
Here's the original file to reproduce the problem:
https://www.freepik.com/free-vector/data-processing-factory-isometric-technology_8625296.htm
And here's what it looks like after converting it to PDF: The artifacts are not as noticeable on the PDF file, possibly because Ghostscript converts it with a higher DPI by default
My workaround to be able to edit the file (remove the background) was to:
open the EPS with Inkscape, ungroup the items
delete the background
export it as PNG
then use the PNG as a "mask" on GIMP to edit the JPG file that came together with the EPS.
I have an SVG graphic that I want to put some text on from my PHP variables. The graphic was generated in Illustrator and resizes in my web page to 100% width. Here is a representation of it:
How could this be done for the 8 text items? Does something special need to be done in Illustrator, like creating an anchor point for the text? How do I update the text item? I've done research but haven't been able to find a similar situation.
Thankful for any information that could help me narrow down my search.
Being someone who has never worked with files of .SVG file type before, this was a misunderstanding.
If you design a graphic in Adobe Illustrator, save it as an SVG and edit it with your favorite text editor, you will be able to see the SVG mark-up. It all makes sense now, and here you will be able to change the text at the code-level.
For my application, I saved the SVG as a PHP file and did an include on it, while changing the raw text to PHP variables in said file. This allowed me to pass my dynamic text as variables to the graphic.
I'm trying to use Flutter SVG dependency, i put in the svg in assets, set in pubspec.yaml, and set in my widget, but, the svg load with black container
I've already tried change the svg, and the another svg works fine, but the other not...
final Widget svg = SvgPicture.asset(assetName, semanticsLabel: 'Acme Logo');
the svg in flutter
Here the svg
My expected response was colored svg like the link in codepen, but i got this
This is probably happened because of the corrupted SVG files from the internet. I faced this problem earlier and tried many ways to solve it. But finally, I solved it with the help of this software, svgcleaner.
Download the application into your OS, from here
After installation,
import your SVG.
Click run.
Success! Here you can see your SVGs' cleaned successfully.
After cleaning, you can grab those SVG files from the output folder location and add those files into your flutter app without seeing any black coloured SVG.
It works perfectly fine like this.
I think I am late but this might just help someone. Just make all the styles in your svg image use inline styling otherwise all colors and styling won't be rendered as the tag is not readable by the SvgPicture.
I tried this SVG asset with the latest version of jovial_svg, and it works great! Here's the result:
This version of jovial_svg should be released in a couple of days, but for now it's 1.1.4-rc.4.
(This asset helped me flesh out stylesheet support - thanks!)
I found this site it solved my problem with the svg file that was out of color.
https://iconly.io/tools/svg-cleaner
use this configuration in illustrator before you add it to your project.
https://user-images.githubusercontent.com/2842459/62599914-91de9c00-b8fe-11e9-8fb7-4af57d5100f7.png
If You don't have solution try to convert your image from svg to png and use:
Image.asset('assets/images/image.png',)
Some SVG images uses style tag and if you try to load such image using flutter_svg, image won't render as expected. Currently flutter_svg supports styling through inline styles only and not the style tag that some of SVG files may contain (in my case, I exported image from Adobe XD and it has all styles in tag). When you try to load such SVG images, you will get below error:
======== Exception caught by SVG =================================================================== The following UnimplementedError was thrown in parseSvgElement: The
element is not implemented in this library.
Style elements are not supported by this library and the requested SVG
may not render as intended.
If possible, ensure the SVG uses inline styles and/or attributes
(which are supported), or use a preprocessing utility such as
svgcleaner to inline the styles for you.
This error mentions to use inline style instead of style tag, you can use svgcleaner (as mentioned in #Alif's answer) or similar utility to convert SVG file with inline styling.
For more detials, refer this link to check SVG compatibility with flutter_svg and handling other use-cases
try this:
Container(
child: SvgPicture.asset(
'assets/images/image.svg',
fit: BoxFit.contain,
),
)
I want to make a responsive website. Part of that is to enhance my graphics. I have a few PNG flat icons that I would like to convert to SVG but I have no knowledge about Illustrator or any other SVG editor. I've tried an online service called vector magic, but the results are not what I need.
What is the best way to convert my images to SVG?
You should try Illustrator to vectorize your images (there is a function to do this). There will never be a perfect result, so you'll have to correct imperfections.
Here is a link that explains how to do this. You'll have then to save your image in "save as" and change the ai filename (for illustrator) to svg.
Would like to take my logo made in illustrator then turn it into a svg so that i can then use Raphael to animate it. I know how to make a simple image by creating my own path using lineTo.
Didn't know if this is possible or not.
Thank you
Once you save your logo created with Illustrator as svg file, there is a way to convert the SVG into a Raphael object and then you can use it with Raphael library.
Chack out this website: http://irunmywebsite.com/raphael/SVGTOHTML_LIVE.php
If you can, open the page with Firefox. Chrome messes up the page. Good Luck.
Well, if its just the path you need without the colors, stroke widths etc, i would save the illustrator logo as an SVG and then open it with a text editor(say Notepad).
From there i would extract the d attribute as a path and manually add the rest of its ''features'' like colors,stroke widths etc.