I want to rerun the node server, whenever there's changes in file, but i want to use fswatch. i am using fswatch with the shell script like
nohup node server.js &
but i can't run the same script again since it will throw EADDRINUSE.
whats the best way to restart the node via script with the help of fswatch (or alternate, without any new installation) ?
Why node doesn't have something like node restart?
what i could think of is get pid from ps and kill it with script, but i guess there should be a better solution.
I am able to do that with the help of fswatch.
fswatch -o mydir | xargs -n1 -I{} ps | grep '[n]ode server.js$' | awk '{system("kill "$1)}'
or putting the same code in seperate shell file. and using it as
xargs -n1 './location-of-shell-file.sh'
when i run grep, that process is also included in ps, so to exclude that i had to use
grep '[n]ode server.js'
EADDRINUSE comes because of you are already bind on the same port. Node.js has no build-in restart mechanics, so yes, you should use some bash scripts (or frameworks) for good restarting background app
Related
I need to display processes, that are running in specific folder.
For example, there are folders "TEST" and "RUN". 3 sql files are running from TEST, and 2 from RUN. So when I use command ps xa, I can see all processes, runned from TEST and RUN together. What I want is to see processes, runned only from TEST folder, so only 3. Any commands, solutions to do this?
You can use lsof for this.
lsof | grep '/path/of/RUN'.
If you want to include both RUN and TEST in same command
lsof | grep -E "/path/of/RUN|/path/of/TEST"
Hope it helps.
You can try fuser to see which processes have particular files open; or, on Linux, examine the /proc/12345/cwd symlink for each of the candidate processes (replace 12345 with the process id of each).
fuser TEST/*.sql
for proc in /proc/[1-9]*; do
readlink "$proc/cwd" | grep -q TEST && echo "$proc"
done
The latter is not portable to other U*xes, though some may offer similar facilities.
This question already has answers here:
linux: kill background task
(8 answers)
Closed 6 years ago.
I'm trying to build a bash script that runs unit tests on a web server.
I wish to run a simple bash script that could be (for example) in a makefile that does the following:
Start a web server
Run the unit tests
Stop the web server
Assuming that the web server is written for NodeJS, here's what it could look like:
npm start &
sleep 5
npm test
The issue with this approach is that the web server will keep on running. How do I stop it after the npm test stage?
The PID of the last started background process is stored in $!, so pick it up after starting npm and kill it when needed:
npm start &
npm_pid=$!
...
kill $npm_pid
You might consider running the process in a screen.
screen -dmS npm npm start #Starts a detached screen named npm, and runs "npm start" inside
Later, when you need to kill the process, you can just kill the screen. When the screen dies, it will take it's child processes with it.
screen -X -S npm quit
Perhaps a duplicate of this solution
ps -ef | grep your_process_name | grep -v grep | awk '{print $2}' | xargs kill)
I'm pretty inexperienced with Linux bash. That being said, I have a CentOS7 machine that runs a COTS application server. This application server runs other processes that sometimes hang. Since I have no control over the start of these processes, I'm looking for a script that runs every 2 minutes that kills processes of the name "spicer" that have been running for longer than 10 minutes. I've looked around and have only been able to find answers for processes that are run and owned by me.
I use the command ps -eo pid, command,etime | grep spicer to get all the spicer processes. The output of this command looks like:
18216 spicer -l/opt/otmm-10.5/Spi 14:20
18415 spicer -l/opt/otmm-10.5/Spi 11:49
etc...
18588 grep --color=auto spicer
I don't know if there's a way to parse this directly in bash. I'm also not well-versed at all in other Linux tools. I know that awk (or gawk) could possibly help.
EDIT
I have no control over the data that the process is working on.
What about wrapping the executable of spicer and start it using the timeout command? Let's say it is installed in /usr/bin/spicer. Then issue:
cp /usr/bin/spicer{,.orig}
echo '#!/bin/bash' > /usr/bin/spicer
echo 'timeout 10m spicer.orig "$#"' >> /usr/bin/spicer
Another approach would be to create a cronjob defintion into /etc/cron.d/kill_spicer. Like this:
* * * * * root kill $(ps --no-headers -C spicer -o pid,etimes | awk '$2>=600{print $1}')
The cronjob will get executed minutely and uses ps to obtain a list of spicer processes that run longer than 10minutes and passes them to kill.
Probably you even want kill -9 if the process is hanging.
You can use the -C option of ps to select processes by name.
ps --no-headers -C spicer -o pid,etime
Then you can use cut to filter the results, if the spacing is consistent. On my system the pid field takes up 8 characters, so I'd use
kill $(ps --no-headers -C spicer -o pid,etime | cut -c-8)
If the spacing is inconsistent (but if so, what kind of messed up ps are you using? :-P), you can use awk { print $1 } instead of cut.
I have seafile (http://www.seafile.com/en/home/) running on my NAS and I set up a cron tab that runs a script every few minutes to check if the seafile server is up, and if not, it will start it
The script looks like this:
#!/bin/bash
# exit if process is running
if ps aux | grep "[s]eafile" > /dev/null
then exit
else
# restart process
/home/simon/seafile/seafile-server-latest/seafile.sh start
/home/simon/seafile/seafile-server-latest/seahub.sh start-fastcgi
fi
running /home/simon/seafile/seafile-server-latest/seafile.sh start and /home/simon/seafile/seafile-server-latest/seahub.sh start-fastcgi individually/manually works without a problem, but when I try to manually run this script file, neither of those lines execute and seafile/seahub do not start
Is there an error in my script that is preventing execution of those 2 lines? I've made sure to chmod the script file to 755
The problem is likely that when you pipe commands into one another, you don't guarentee that the second command doesn't start before the first (it can start, but not do anything while it waits for input). For example:
oj#ironhide:~$ ps -ef | grep foo
oj 8227 8207 0 13:54 pts/1 00:00:00 grep foo
There is no process containing the word "foo" running on my machine, but the grep that I'm piping ps to appears in the process list that ps produces.
You could try using pgrep instead, which is pretty much designed for this sort of thing:
if pgrep "[s]eafile"
Or you could add another pipe to filter out results that include grep:
ps aux | grep "[s]eafile" | grep -v grep
If the name of this script matches the regex [s]eafile it will trivially always take the exit branch.
You should probably be using pidof in preference of reinventing the yak shed anyway.
turns out the script itself was working ok, although the change to using pgrep is much nicer. the problem was actually in the crontab (didn't include the sh in the command)
I am very new to shell scripting, can anyone help to solve a simple problem: I have written a simple shell script that does:
1. Stops few servers.
2. Kills all the process by user1
3. Starts few servers .
This script runs on the remote host. so I need to ssh to the machine copy my script and then run it. Also Command I have used for killing all the process is:
ps -efww | grep "user1"| grep -v "sshd"| awk '{print $2}' | xargs kill
Problem1: since user1 is used for ssh and running the script.It kills the process that is running the script and never goes to start the server.can anyone help me to modify the above command.
Problem2: how can I automate the process of sshing into the machine and running the script.
I have tried expect script but do I need to have a separate script for sshing and performing these tasksor can I do it in one script itself.
any help is welcomed.
Basically the answer is already in your script.
Just exclude your script from found processes like this
grep -v <your script name>
Regarding running the script automatically after you ssh, have a look here, it can be done by a special ssh configuration
Just create a simple script like:
#!/bin/bash
ssh user1#remotehost '
someservers stop
# kill processes here
someservers start
'
In order to avoid killing itself while stopping all user's processes try to add | grep -v bash after grep -v "sshd"
This is a problem with some nuance, and not straightforward to solve in shell.
The best approach
My suggestion, for easier system administration, would be to redesign. Run the killing logic as root, for example, so you may safely TERMinate any luser process without worrying about sawing off the branch you are sitting on. If your concern is runaway processes, run them under a timeout. Etc.
A good enough approach
Your ssh login shell session will have its own pseudo-tty, and all of its descendants will likely share that. So, figure out that tty name and skip anything with that tty:
TTY=$(tty | sed 's!^/dev/!!') # TTY := pts/3 e.g.
ps -eo tty=,user=,pid=,cmd= | grep luser | grep -v -e ^$TTY -e sshd | awk ...
Almost good enough approaches
The problem with "almost good enough" solutions like simply excluding the current script and sshd via ps -eo user=,pid=,cmd= | grep -v -e sshd -e fancy_script | awk ...) is that they rely heavily on the accident of invocation. ps auxf probably reveals that you have a login shell in between your script and your sshd (probably -bash) — you could put in special logic to skip that, too, but that's hardly robust if your script's invocation changes in the future.
What about question no. 2? (How can I automate sshing...?)
Good question. Off-topic. Try superuser.com.