On my PC I use two operation systems Windows 8 and Ubuntu 14.04. I noticed that after booting Linux and then rebooting to Windows, Windows show the wrong time (Windows clock is 2 hours behind).
I checked in the Linux - time is correct.
I checked time settings - both OS have UTC+2 time zone and option to set time from the Internet.
If I correct time in Windows and do not boot Linux everything is O.K. But at list single loading Linux makes time shift.
I have tried to remove the option for setting time from the Internet.
But manual time setting option changed nothing. What should be done to see the same time in the both operating systems?
That's very popular problem.
All you need to do (and that's really the rightest way) is to say Windows that you hardware time is UTC.
To do it just add the following DWORD key to the registry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\TimeZoneInformation\RealTimeIsUniversal
and set its value to 1.
Also you can youse QWORD key instead of DWORD if you have 64bit Windows. But, as far as I know, it's not necessary.
The simplest solution is to set time zone UTC (London) in Linux.
I faced a similar problem, and my solution is quite simple without changing any configs of your operating system.
Requirements: Need to have a internet connection for time sync. Have admin privileges.
You need to enable windows time service
Go to services by typing in the search bar.
Open services
Search for windows time service (W32Time)
W32Time Service
Change the Startup Type to Automatic
Change Startup type
Creating a small bat script file
Open Notepad and create a file with the following command.
w32tm /resync
Save it anywhere with .bat extension. (Remember its location)
Schedule a task
Go to Task Scheduler by typing it in the search bar
Open Task Scheduler
Right click on the empty space > create new task
Create New Task
Give your task a name and description
Change "When running the task, use the following user account" to any admin user or admin group account.
Select "Run whether user is logged on or not"
Check the box for "Run with highest privileges"
Check the box for "Hidden" and "Configure for" = Windows 10
Go to Triggers tab, add the following triggers by clicking on "New..."
First Trigger
"Begin the task:" Select "At startup"
In Advanced settings, check the box for Enabled
Second Trigger
"Begin the task:" Select "At log on"
"Settings" Select "Any user"
In Advanced settings, check the box for Enabled
Go to Actions tab, create a new action by clicking on New...
"Action:" Select "Start a program"
In "Program/script" browse and select the file you created earlier.
And then click OK
Go to Conditions tab
Check the box "Start only if the following network connection is available"
Select your internet network or you can select "any connection" as wild card.
Go to Settings tab.
Check "Allow task to be run on demand"
Check "Run task as soon as possible ..."
Check "If the task fails, restart every" select "1 minute", "Attempts to restart up to:" 3 times
Check "Stop the task if runs longer than:" 3 Days
Check "If the running task does not end when requested, force it to stop"
"If the task is already running, then the following rule applies:"
Select "Do not start a new instance"
I had the same problem recently. My solution is:
First make sure you have the correct time zone
Set BIOS time to local time.
In Linux, edit /etc/default/rcS by replacing UTC=yes with UTC=no.
Reboot.
Related
We are using web project unfinished, and everytime the computer start, we need to go to:
c:/wamp64/www/
In this folder we have a folder "projectname", we have to shift right click , and open powershell windows here.
then we have in the terminal: PS C:\wamp64\www\projectname> (and here we have to write "node server.js") and enter.
This have to be done once wamp is open, this is the reason of the delay.
How can we do that automatically at windows start up after 30s ? that way we won't have to do that every time we reboot a computer.
thank you for your help
I would use the task scheduler for that purpose.
Open Task Scheduler by pressing “Windows+R” and then typing “taskschd.msc” in the window that opens. Then take the following steps:
Click “Create a task” and enter a name and description for the new task. To run the program with administrator privileges, check the “Run with the highest privileges” box.
Switch to the Triggers tab and click the “New…” button. Here you can specify the conditions that trigger the task to be executed. For example, you can have it executed on schedule, at logon, on idle, at startup or whenever a particular event occurs.
Choose At log on then set it to run for Any user and set the delay to 30 seconds
Navigate to the “Actions” tab, and click “New…”.
To schedule the PowerShell script, specify the following parameters:
Action: Start a program
Program\script: powershell
Add arguments (optional): -File [Specify the file path to the script here]
References
How to automate powershell scripts with task scheduler
I am using windows 10 task scheduler to run tasks that require me using my personal user account (its necessary to use my user and not system user because of permission issues - I am part of an organization).
In windows 7 computers everything worked fine but as we upgraded to win 10 I cant run the tasks without using the System user (as mentioned before it doesn't work because of permissions).
I get the following error
Additional Data: Error Value: 2147943726
all I found online was an advice to use the system user other then that nothing :-(
please save my day.
here is a picture of the settings that I want to change.
Today I got the same problem, (HRESULT) 0x8007052e (2147943726) "unknown user name or bad password"
My solution: was to Re-Asign the User on the "Change User or Group" button to get the lattest Active Directory information of the User.
Then I could Run the Task Again...
As a better practice, you could use an "Aplicative" User instead of a
regular User which change more often in regular basis.
If you use your account, it may change your password every some
quantity of days... and you will need to "fix it" again...
If you use an "Aplicative" account, it may change less than regular
User...
You could do this by going to the task tab "General",
then "Change User or Group" and assigning the "Aplicative" account,
then "OK" Button.
I had the same issue with the windows task scheduler.
The reason for the failure is the recent change in the password of the system user which was configured at the time of task creation.
Solution:
Go to properties of task
Under General tab, click on "Change User or Group..."
Enter the username in the field "Enter the object name to select"
This will ask for Authentication, provide your credentials
Thats it !
I had to select the option to "Do not store password. The task will only have access to local computer resources.", which was fine based on what the task was defined as. For me, I suspect some sort of recent patch or security hardening caused this as it seemed to move through our environments at similar but different days.
After reading this post this is what worked for me.
Go to properties of task
Under General tab, at the bottom of that window you will see
Configure for: Change that to the system you are using
(in my case server 2012 R2) hit ok and enter your password.
I know it is a late answer, I had the same issue today, a scheduled task I had created a long time ago and stopped running a week ago. Turns out I had changed the password for my username which was the issue. once I went back to the task, made a chance I was asked for the password again.
Go to Control Panel>System and Security>Administrative Tools -> Local Security Policy -> Local Policies -> User Rights Assignment -> Log on as a batch job
Add the System User.
What I realized is that failure is tied to a password expired policy. The PC got a sort of "frozen" state for the scheduler until a new password is set. The problem is solved once the new password is taken into account by the system.
Highly recommended to perform a little change for the scheduler to ask a new password entry and update the task.
When choosing "Run whether user is logged in or not" on Windows Server 2019 I was getting the error message:
An error has occurred for task Dealer Portal data import. Error message: The following error was reported: 2147943712
There is a Group Policy setting that stops this working, you can disable it with the following steps:
Start > Run > secpol.msc
Security Settings > Local Policies > Security Options > Network access: Do not allow storage of passwords and credentials for network authentication
Disable that
Now you can save the Scheduled Task
You can also simply edit the properties of each task (you don't have to change anything), hit ok, and you'll be prompted for your new password. "Conveniently", I didn't see a way to do all of them at once.
We had the same problem with Windows 2012 server machines being cloned on a vmware ESX server. The clone/deployment script used sysprep to make every machine individual. With this the users assigned with the scheduled task got screwed up. Our solution was to re-generate the task via batchfile during startup of the machine:
REM Delete the task:
SCHTASKS /Delete /TN "NameOfScheduledTask" /f
REM Create a task to run every 5 minutes
SCHTASKS /Create /TN NameOfScheduledTask /SC MINUTE /MO 5 /TR "some command for task" /NP
I'm trying to setup a cron task in Plesk to run a short script every 5 minutes, I've just moved from a managed hosting account to a full access Plesk VPS, and I'm a little lost on a couple of things, this one in particular, when I go to Server > Scheduled Tasks I get a list of 'system users' as below, but I'm not sure under which user to make the cron task, any ideas?
adm
apache
bin
daemon
ftp
games
gopher
.. going all the way down to webalizer
The cron script path is below if that's relevant as to which user to choose -
/var/www/vhosts/mysite.com/httpdocs/scripts/index.php
If you are going to create subscription-level task, than you can create cron/windows scheduler task in:
"Subscriptions" > your subscription > "Websites & domains" > click on "Show advanced operations" > "Scheduled Tasks" > there will be only one name of FTP user of your subscription.
Note: Pay attention to interface changes for Plesk 11.5 and Plesk 12+ - there is no need to open "Show advanced operations".
The latest Plesk 12.5 provide a lot of options to cover most of the task cases:
Plesk 12.5
Other Plesk versions support only "Run a command" option:
Plesk 12.0
Plesk 11.5
If you need just answer, in "Server" -> "Scheduled Tasks" you can choose:
FTP user of your subscription mysite.com
your can choose root, but it's not recommended for security reasons.
For Plesk version below 12.5 to schedule execution of PHP script on Windows there is two ways:
Direct call of php binary with your script as argument.
Path to executable file: C:\Program Files (x86)\Parallels\Parallels Panel\Additional\PleskPHP55\php.exe
Arguments: path to you script like C:\inetpub\vhosts\domain.tld\httpdocs\script.php
Note: Pay attention to interpretation path, ...Additional\PleskPHP55\php.exe it path for PHP 5.5, you can change PleskPHP55 to PleskPHP5, PleskPHP53 or PleskPHP54 to use another PHP version.
Call script via request to your site:
Path to executable file: C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe
Arguments: -c "(new-object system.net.webclient).downloadstring('http://domain.test/script.aspx')"
https://www.motherhost.com/help/creating-or-removing-scheduled-tasks-in-plesk/
Creating a Scheduled Task in Plesk 10:
You can set up Scheduled Tasks in Plesk by doing the following:
Log into Plesk*
Click on the Websites & Domains tab.
Click on Show Advanced Operations (a small grey link in the middle of the page), if the advanced options are not already shown.
Click on Scheduled Tasks.
Select the appropriate system user.
Click on Schedule New Task.
Fill out the form as follows:
Switched On: Check the box to turn on the scheduled task.
Description: A short description to remind you what this scheduled task does.
Scheduler Notification: If you want an email every time this runs, select the appropriate option, otherwise select Do Not Send. You may provide an email address where you want the notifications sent to.
Path to executable file: Specify the path to the file you wish to execute. For Windows servers, it would be something like this:
C:\Program Files (x86)\Parallels\Plesk\Additional\PleskPHP5\php-cgi.exe
Arguments: D:\Inetpub\vhosts\mydomain.tld\httpdocs\myscript.php
For Linux servers with Plesk, ir would be something like this:
/var/www/vhosts/domain.tld/httpdocs/myscript.php
Replace domain.tld with your domain name, and myscript.php with the appropriate subfolder(s) (if any) and filename.
Task Priority: Select Low, Normal or High.
Specify when to run your command by selecting the appropriate checkboxes in the Hours, Days of month, Months or Days of week fields.
Click OK to schedule the task or click Run Now to schedule the task and immediately run it.
You will be taken back to the Scheduled Tasks screen and you should see your new scheduled task listed at the bottom.
Removing a Scheduled Task in Plesk 10
Logging into Plesk*
Click on the Websites & Domains tab.
Click on Show Advanced Operations (a small grey link in the middle of the page), if the advanced options are not already shown.
Click on Scheduled Tasks.
Select the appropriate system user.
Check the box next to the Scheduled Task you want to remove.
Click on the Remove button.
It will load a new page and ask if you really want to deleted it. Check the Confirm Removal box and click on the OK button.
You will be taken back to the Scheduled Tasks screen and it should say: "Information: Scheduled tasks were removed."
Use this command:
php -q httpdocs/scripts/index.php
So I've backed myself into a corner - I wanted an application or command to run when a user logged in over RDP to a server. As per a best-practice suggestion on a Microsoft site, I set up this program to run under group policy rules and now I have a dilemma:
I log into my server via RDP, the default program launches and then immediately logs me out without a chance for me to do anything.
How can I get into the box again to change this setting? Server is Windows 2008 r2 with terminal services installed on a remote IP.
Could you just remove\edit the GPO, wait a bit, and then reboot the server? You could still send it the "shutdown /m \computername". You could also use psexec to remotely run "gpupdate /force" before rebooting.
If you set that up as local group policy, then you can try opening mmc, choosing the Group Policy editor, and pointing it to that machine to edit the policies. In more detail:
Start --> Run --> mmc
File --> Add/Remove Snap-in
Under the Standalone tab, click Add...
Choose Group Policy Object Editor
In the following wizard, click the Browse button
Click the "Computers" tab, select the Another computer radial button, and type the name or Browse to the remote computer
Click OK, then Finish, then Close, and finally OK
Also you could maybe edit/add a logon script that runs "shutdown -a" to abort logoff/shutdowns, but that may not work due to timing.
You didn't mention if this was Domain, or local, but those options should take care of either.
I have a Redhat 5 OS, a dual monitor setup, and two workspace. When the machine reboots, I want to set the following:
On workspace 1,
* run the thunderbird-client on the left monitor.
* run 3 terminal clients on the right monitor.
On workspace 2,
* run firefox on the right monitor.
Can someone point me as to where I can set these settings? I am sure there is a way since when my machine boots up, couple of terminal clients pops up, my irc chat client pops up as well. I do not know how I did this before.
You could try Devil's Pie (yum install devilspie)
It's a tool for creating rules that will bind specific actions to applications as they are launched (i.e. setting workspace, position, transparency, etc...).
I found some doc here: http://www.foosel.org/linux/devilspie and here: http://live.gnome.org/DevilsPie
Of course, saving your workspace on logout can help too (System > Preferences > More Preferences > Sessions, then check "Automatically save changes to session").
Once you have setup your application rules, you could write a simple Bash script to start them all in sequence, and add that script to the Startup programs in the sessions preferences.