I am currently attempting to parse data that is sent from an outside source serially. An example is as such:
DATA|0|4|7x5|1|25|174-24|7x5|1|17|TERW|7x5|1|9|08MN|7x5|1|1|_
This data can come in many different lengths, but the first few pieces are all the same. Each "piece" originally comes in with CRLF after, so I've replaced them with string.gsub(input,"\r\n","|") so that is why my input looks the way it does.
The part I would like to parse is:
4|7x5|1|25|174-24|7x5|1|17|TERW|7x5|1|9|08MN|7x5|1|1|_
The "4" tells me that there will be four lines total to create this file. I'm using this as a means to set the amount of passes in the loop.
The 7x5 is the font height.
The 1 is the xpos.
The 25 is the ypos.
The variable data (172-24 in this case) is the text at these parameters.
As you can see, it should continue to loop this pattern throughout the input string received. Now the "4" can actually be any variable > 0; with each number equaling a set of four variables to capture.
Here is what I have so far. Please excuse the loop variable, start variable, and print commands. I'm using Linux to run this function to try to troubleshoot.
function loop_input(input)
var = tonumber(string.match(val, "DATA|0|(%d*).*"))
loop = string.match(val, "DATA|0|")
start = string.match(val, loop.."(%d*)|.*")
for obj = 1, var do
for i = 1, 4 do
if i == 1 then
i = "font" -- want the first group to be set to font
elseif i == 2 then
i = "xpos" -- want the second group to be set to xpos
elseif i == 3 then
i = "ypos" -- want the third group to be set to ypos
else
i = "txt" -- want the fourth group to be set to text
end
obj = font..xpos..ypos..txt
--print (i)
end
objects = objects..obj -- concatenate newly created obj variables with each pass
end
end
val = "DATA|0|4|7x5|1|25|174-24|7x5|1|17|TERW|7x5|1|9|08MN|7x5|1|1|_"
print(loop_input(val))
Ideally, I want to create a loop that, depending on the var variable, will plug in the captured variables between the pipe deliminators and then I can use them freely as I wish. When trying to troubleshoot with parenthesis around my four variables (like I have above), I receive the full list of four variables four times in a row. Now I'm having difficulty actually cycling through the input string and actually grabbing them out as the loop moves down the data string. I was thinking that using the pipes as a means to delineate variables from one another would help. Am I wrong? If it doesn't matter and I can keep the [/r/n]+ instead of each "|" then I am definitely all for that.
I've searched around and found some threads that I thought would help but I'm not sure if tables or splitting the inputs would be advisable. Like these threads:
Setting a variable in a for loop (with temporary variable) Lua
How do I make a dynamic variable name in Lua?
Most efficient way to parse a file in Lua
I'm fairly new to programming and trying to teach myself. So please excuse my beginner thread. I have both the "Lua Reference Manual" and "Programming in Lua" books in paperback which is how I've tried to mock my function(s) off of. But I'm having a problem making the connection.
I thank you all for any input or guidance you can offer!
Cheers.
Try this:
val = "DATA|0|4|7x5|1|25|174-24|7x5|1|17|TERW|7x5|1|9|08MN|7x5|1|1|_"
val = val .. "|"
data = val:match("DATA|0|%d+|(.*)$")
for fh,xpos,ypos,text in data:gmatch("(.-)|(.-)|(.-)|(.-)|") do
print(fh,xpos,ypos,text)
end
Related
I'm designing a Mastermind game, which basically compares 2 lists and marks the similarities. When a colour is found at the right place, a flag making the correct position is added and the item found on the reference list is marked off. The reference list is feeding off an array from another function. The problem is at the mark off, as any changes done to the reference list is changing also the original array, which i don't want it to happen
tempCode = mCode #mCode is the array combination randomly generated from another function
for i in range (len(uCode)): #user input array
for j in range (len(tempCode)): #temp array
if uCode[i] == tempCode[j]: # compare individual chars
if i == j: #compare position
flagMark = "*"
tempCode.insert(j+1, "x") #problem starts here
tempCode.remove(tempCode[j])
fCode.append(flagMark)
When the insert is reached both the tempCode and mCode change which it is not intended.
The code is written in a way should the user enter a combination of the same colours, thus checking the chras(the colours are just letters) and the position, and then mark them of with "x"
As it stands, when it gets to
tempCode.insert(j+1, "x")
the arrays will change to
mCode = ["B","R","x","G","Y"]
tempCode = ["B","R","x","G","Y"]
when I would just want
mCode = ["B","R","G","Y"]
tempCode = ["B","R","x","G","Y"]
See also this answer, which is a different presentation of the same problem.
Essentially, when you do tempCode = mCode, you're not making a copy of mCode, you're actually making another reference to it. Anything you do to tempCode thereafter affects the original as well, so at any given time the condition tempCode == mCode will be true (as they're the same object).
You probably want to make a copy of mCode, which could be done in either of the following ways:
tempCode = mCode.copy()
tempCode = mCode[:]
which produces a different list with the same elements, rather than the same list
I am creating a program which opens an image, and uses the MATLAB ginput command to store x and y coordinates, which are operated on in the loop to fulfill requirements of an if statement and output a number or string corresponding to the region clicked during the ginput session. At the same time, I am using the input command to input a string from the command window relating to these numbers. The ginput session is placed in a while loop so a click in a specific area will end the input session. For each session (while loop), only one or two inputs from the command window are needed. Finally, I am trying to store all the data in a csv or txt file, but I would like it to be tabulated so it is easy to read, i.e. rows and columns with headers. I am including some sample code. My questions are: 1, how can an input of x and y coordinates be translated to a string? It is simple to do this for a number, but I cannot get it to work with a string. 2, any help on printing the strings and number to a tabulated text or cdv file would be appreciated.
Command line input:
prompt='Batter:';
Batter=input(prompt,'s');
While Loop:
count=1;
flag=0;
while(flag==0)
[x,y]= ginput(1);
if (y>539)
flag=1;
end
if x<594 && x>150 && y<539 && y>104
%it's in the square
X=x;
Y=y;
end
if x<524 && x>207 && y<480 && y>163
result='strike'
else
result='ball'
end
[x,y]= ginput(1);
pitch=0;
if x<136 && x>13
%its' pitch column
if y<539
pitch=6;
end
if y<465
pitch=5;
end
if y<390
pitch=4;
end
if y<319
pitch=3;
end
if y<249
pitch=2;
end
if y<175
pitch=1;
end
end
if pitch==0
else
plot(X,Y,'o','MarkerFaceColor',colors(pitch),'MarkerSize',25);
text(X,Y,mat2str(count));
end
count=count+1
M(count,:)=[X,Y,pitch];
end
For the above series of if statements, I would prefer a string output rather than the numbers 1-6 if the condition is satisfied.
The fprintf function is used to print to a file, but I have issues combining the strings and numbers using it:
fileID = fopen('pitches.csv','w');
fid = fopen('gamedata.txt','w');
fmtString = [repmat('%s\t',1,size(Batter,2)-1),'%s\n'];
fprintf(fid,fmtString,Batter,result);
fclose(fid);
for i=1:length(M)
fprintf(fileID,'%6.2f %6.2f %d\n',M(i,1),M(i,2),M(i,3));
end
fclose(fileID);
I have tried adding the string handles to the fprintf command along with the columns of M, but get errors. I either need to store them in an array (How?) and print all the array columns to the file, or use some other method. I also tried a version of the writetable method:
writetable(T,'tabledata2.txt','Delimiter','\t','WriteRowNames',true)
but I can't get everything to work right. Thanks very much for any help.
Let's tackle your questions one at a time:
1, how can an input of x and y coordinates be translated to a string?
You can use the sprintf command in MATLAB. This takes exactly the same syntax as fprintf, but the output of this function will give you a string / character array of whatever you desire.
2, any help on printing the strings and number to a tabulated text or cdv file would be appreciated.
You can still use fprintf but you can specify a matrix as the input. As such, you can do this:
fprintf(fileID,'%6.2f %6.2f %d\n', M.');
This will write the entire matrix to file. However, care must be taken here because MATLAB writes to files in column major format. This means that it will traverse along the rows before going to the next column. If you want to write data row by row, you will need to transpose the matrix first so that when you are traversing down the rows, it will basically do what you want. You will need to keep this in mind before you start trying to write strings to an file. What I would recommend is that you place each string in a cell array, then loop through each element in the cell array and write each string individually line by line.
Hopefully this helps push you in the right direction. Reply back to me in a comment and we can keep talking if you need more help.
I have a variable that is created by a loop. The variable is large enough and in a complicated enough form that I want to save the variable each time it comes out of the loop with a different name.
PM25 is my variable. But I want to save it as PM25_year in which the year changes based on `str = fname(13:end)'
PM25 = permute(reshape(E',[c,r/nlay,nlay]),[2,1,3]); % Reshape and permute to achieve the right shape. Each face of the 3D should be one day
str = fname(13:end); % The year
% Third dimension is organized so that the data for each site is on a face
save('PM25_str', 'PM25_Daily_US.mat', '-append')
The str would be a year, like 2008. So the variable saved would be PM25_2008, then PM25_2009, etc. as it is created.
Defining new variables based on data isn't considered best practice, but you can store your data more efficiently using a cell array. You can store even a large, complicated variable like your PM25 variable within a single cell. Here's how you could go about doing it:
Place your PM25 data for each year into the cell array C using your loop:
for i = 1:numberOfYears
C{i} = PM25;
end
Resulting in something like this:
C = { PM25_2005, PM25_2006, PM25_2007 };
Now let's say you want to obtain your variable for the year 2006. This is easy (assuming you aren't skipping years). The first year of your data will correspond to position 1, the second year to position 2, etc. So to find the index of the year you want:
minYear = 2005;
yearDesired = 2006;
index = yearDesired - minYear + 1;
PM25_2006 = C{index};
You can do this using eval, but note that it's often not considered good practice. eval may be a security risk, as it allows user input to be executed as code. A better way to do this may be to use a cell array or an array of objects.
That said, I think this will do what you want:
for year = 2008:2014
eval(sprintf('PM25_%d = permute(reshape(E',[c,r/nlay,nlay]),[2,1,3]);',year));
save('PM25_Daily_US.mat',sprintf('PM25_%d',year),'-append');
end
I do not recommend to set variables like this since there is no way to track these variables and completely prevents all kind of error checking that MATLAB does beforehand. This kind of code is handled completely in runtime.
Anyway in case you have a really good reason for doing this I recommend that you use the function assignin for this.
assignin('caller', ['myvar',num2str(1)], 63);
In my code I'm trying to use load with entries from a cell, but it is not working. The portion of my code below produces a 3 dimensional array of strings. The strings represent the paths to file names.
for i = 1:Something
for j = 1:Something Different
for k = 1: Yet Something Something Different
DataPath{j,k,i} = 'F:\blah\blah\blah\fileijk %file changes based on i,j,and k
end
end
end
In the next part of the code I want to use load to open the files using the path names defined in the code above. I do this using the code below.
Dummy = DataPath{l,(k-1)*TSRRange+m};
Data = load(Dummy);
The idea is for Dummy to take the string content out of DataPath so I can use it in load. By doing this I thought that Dummy would be defined as a string and not a cell, but this is not the case. How do I pull the string out of DataPath so I can use it with load? Thanks.
I have to load the data this way because the data is located in multiple folders. I can post more of the code if needed, but it is complex.
Dummy is a cell because you assigned a 3D cell array but are accessing a 2D cell with Dummy = Datapath{1,(k-1)*TSRRange+m}
I don't believe that you can expect to access all cell elements I this way. Instead, use three indices just as you did when creating it.
Question : Is there a way to have direct access to a specific cell in vtkPolyData structure?
I'm using vtkPolyData to store sets of lines, say L.
Currently, I'm using GetLines() to know the number of lines in L. Then, I have to use GetNextCell to go through this set of lines using a "while" loop.
Current code is something like:
vtkSmartPointer<vtkPolyData> a;
...
vtkSmartPointer<vtkCellArray> lines = a->GetLines();
...
while(lines->GetNextCell(numberOfPoints, pointIds) != 0)
-> I'd like to be able to work directly on a specific line by doing something like:
myline = a[10];
doSomething(myline);
you could get an access to a specific cell using vtkDataSet::GetCell(vtkIdType cellId) function