I downloaded an iso which contains the files
setup.exe
setup-1.bin
setup-2.bin
It fails to install by executing the setup.exe so I analyzed it with innoextract, which opens just setup-1.bin but not setup-2.bin. Can I manually decompress the .bin files or modify the setup.exe? If yes, how can I do that?
I think the second bin file is just corrupted, so i'm unable to extract it.
That is the reason why Inno Setup cannot continue in installation.
I think this is an answer - you simply need to download the installer again.
Related
I want to install Mingw-W64, but the download is in winrar form not in a .exe. When I extract, it the folder is filled with bunch of files. None of them contains the installer.
I searched, but nothing is working. All I want is the installer.exe but every time it's just an archive.
I found a video, but there is a problem when I tried the instructions. The download kept restarting and nothing happened. When I extracted the archive the files are not same as shown in the video.
There is a windows installer at the msys2 official website https://www.msys2.org/ . Follow the guides for a successful installation.
Alternatively you need to extract the downloaded files to a path like the root of your C: drive and add the contents to your system or user path as an environment variable.
I want to extract a ZIP File with the .exe inside.
I want to execute the .exe inside the Zip to extract the Zip File.
Already tried it by executing: ZipDLL::extractall "$EXEDIR" "$DESTINATION"
I think that does not work, cause the .exe is stored in the TEMP Folder when opened, so it cannot find the.Zip file
So how do I extract that Zip when executing the .exe from inside the Zip?
Thanks for answers!
Your question does not make a lot of sense, you should just put the files inside the installer and not have a zip file at all.
Even if it made sense, it is not possible because where a exe is executed from when you double click it inside a zip file depends on the zip program you are using and there is no way of getting the path of the zip it was extracted from.
If for some reason you want to be able to update the files inside the zip file without rebuilding the installer you can use a cab file instead. The CabX plug-in supports extracting from cab files appended to the installer exe.
I am using InstallShield to build an installer to install some custom prerequisites on my client computers. But everytime I try to run the installer, I get:
The files for installation requirement Crystal Runtime x86 could not be found. The installation will now stop. This is probably due to a failed, or canceled download.
I have told the prereq where the File sits on my local development machine, and it seems like InstallSheild takes this file, and copies it to the ISSetupPrerequisites folder in the same directory as the .exe file it generates. I can confirm my file exists in the ISSetupPrerequisites folder.
Is there something else I need to do to tell the installer where my .msi installer is for my prerequisite?
My guess is that you've copied the installer (setup.exe or something similar) to the PC that you're installing on but not the ISSetupPrerequisites folder. You need to do this because you haven't changed the setting that puts the prerequisites (Crystal Runtime x86 in your case) inside the installer itself.
To enable this, go to your release's "Setup.exe" tab and change the value of the property called "InstallShield Prerequisites Location" from "Copy From Source Media" to "Extract From Setup.exe".
You should verify the checksum and filesize attributes in the redistributable's pre-requisite file. If these don't match the local/downloaded file you'll see that error
(Example files node for MSFT VS 2010 Tools for Office Runtime)
<files>
<file LocalFile="<ISProductFolder>\SetupPrerequisites\VSTOR\vstor_redist.exe" URL="http://download.microsoft.com/download/B/5/1/B51D2F9E-1432-4B76-8248-F47316BB8EE0/vstor_redist.exe" CheckSum="a1b5c8fb246a9d0d66f12d3b6f5e471d" FileSize=" 0,40051808"></file>
</files>
Make sure the CheckSum value inside the .prq file is exactly the same as the MD5 checksum of the package copies on the web url and under < ISProductFolder >\SetupPrerequisites
You can calculate MD5 on windows using the command
certutil.exe -hashfile myPackage.exe MD5
I'm trying to install the extension for Visual Studio 2012 that allows emacs key-bindings.
I'm following through the steps here:
Emacs Keybindings in Visual Studio 2012 or 2013
I'm up to step 5:
Run the vsik file as administrator. This is required so the extension
can write Emacs.vsk into the program files folder. I wasn't sure the
best way to do this so I ran a command prompt as admin and then
executed start emacsemulations.vsik from the prompt.
So, running emacsemulations.vsix from an administrator command prompt,
I get the following error "This VSIX package is invalid because it does not contain the file extension.vsixmanifest at the root."
I'm not changing any of the file names inside the package.
I'm thinking this may have something to do with how windows zips up the file -- I'm able to recreate the problem simply by unzipping and rezipping the EmacsEmulation.vsix file without changing the contents of the vsix package.
If anyone has any suggestions on how to fix, or even better, the actual updated vsix file itself, I'd be very grateful!
The issue you have relies on the way you are zipping your file, what you should do is zip all files inside the folder you created (in this case, "EmacsEmulations") when you unzipped it.
Step into the EmacsEmulations folder.
Select all files.
Add to .zip
Rename the .zip output to EmacsEmulations.vsix
I'm trying to get this extension to work too, so good luck!
I am writting a NSIS-script for installs of the programs and put into folder. The folder is zipped via NSIS. I want, that someone clicks once the zip-file and it will be unzipped and executed the NSIS-script into folder. But how?
Update: I explain again. NSIS has the compiler for NSIS script and Installer based on ZIP! Firstly, I write a NSIS script to install some programs in a folder. Executing the NSIS script is working! I dont want to send the folder, but I want to send only one file. So I am using the Installer based on ZIP to zip the folder. But if I click the zipped file, it will be unzipped on desktop without executing the NSIS script into folder. So I have to click the NSIS script into folder. That I dont want! I want to click only on zipped file and it will be unzipped and executed automatically the NSIS script. Clearly?
.zip files cannot execute code.
NOTE: The ZIP2EXE NSIS tool uses makensis internally, it is just a helper application that creates simple installers.
Your question is confusing, but I believe that what you want to do is create a self extracting archive that contains multiple files and run and NSIS installer contained in that archive it is unpacked.
You can do this with 7zip.
It's easiest to do this with a dos batch file. Open notepad and create "selfinstall.bat"
Add the following;
(
ECHO ;!#Install#!UTF-8!
ECHO Title="My Installer"
ECHO BeginPrompt="Do you want to run the installer?"
ECHO ExecuteFile="Setup.exe"
ECHO ;!#InstallEnd#!
) > temp.$$$
This sets up the information that the self extracter needs such as it's title (My Installer) and the name of the executable to run (Setup.exe)
Then, add the lines to create your zip file
7z a -r files.7z myfolder
where myfolder is the name of the folder that has all the files.
Now, add the installer - Make sure that the installer (Setup.exe) is in the root of the .7z file
7z a files.7z Setup.exe
Then, copy the self extracter and the 7z to a single executable file
copy /b 7z.sfx + temp.$$$ + files.7z "Install.exe"
Then delete your temp files
del files.7z
del temp.$$$
I adapted this from a script I saw here; http://www.911cd.net/forums//index.php?showtopic=18845
For more information on the .SFX modules see here; http://7zsfx.info/en/
There's also a sourceforge project for a GUI to accomplish this; http://sourceforge.net/projects/sfx-maker/