Starting with a fresh install of Visual Studio, I used NuGet console to "Install-Package ILNumerics".
I create a new Windows Form project, added a reference to ILNumerics.dll and I can use ILNumerics, so that's fine. However, some of the getting started documentation references a "Computing Module" that I should add to my project. The problem is that I don't see anything like this in the "Add New Item" dialog when it opens up. I also had to manually add the ILNumerics widgets to the Toolbox (i.e. clicking "Choose Items. . ." and then loading ILNumerics.dll).
Can someone please explain how I can get the "Computing Module" widget to appear in my "Add New Item" dialog? Thanks.
nuget packages of Ilnumerics are obsolete now. Go to http://ilnumerics.net/download.html and install ILNumerics Ultimate VS. The ILNumerics Visual Studio Extension installs a Computing Module and the Visualization Module templates in C#.
Docu: http://ilnumerics.net/Getting-Started-with-ILNumerics.html
Related
I just installed WIX 3.10 and I'm using VS 2012 Ultimate. I have then successfully added a WIX setup project to my solution but that's about as far as I can go because the WIX menu is not showing up. The commands buttons that should appear at the top of the solution explorer window does not appear, neither does the shortcut button that appears just below the 'clean' button when you right click the project. I have tried uninstalling and restarting my PC several times but still the same.
snap shot of the solution explorer window.
I'm obviously missing something, but what? Thanks very much.
The designer you're looking for is from a 3rd party commercial product:
https://www.add-in-express.com/wix-designer/index.php
Normally one would write most Wix files by hand. It's relatively simple XML and the documentation isn't bad.
You can install the extension: Tools -> Extensions and Updates
Then in the search box type 'wix' and Enter.
The extension name is 'Designer for Visual Studio Wix Setup Projects':
I assume this is a simple fix considering I don't see any other posts about others having this issue. I am using VS2012 and I added slowcheetah 2.5.10.3 to the project using the nuget package installer.
I have tried opening a new console application as well as a unit test project, but in both I am not able to "add transform" to my App.config. The option in the context menu doesn't exist...
You will need to install the SlowCheetah Visual Studio extension to get the additional menus in Visual Studio. The NuGet package only adds a .targets file to the solution which is useful for command line (build server) scenarios.
I have used the ajaxtoolkit with .NET 4 and Visual Studio 2010, and I was able to add a new tab to the toolbox and add the ajaxtoolkit controls to the toolbox. How do I do this in Visual Studio 2012?
I have added the ajaxtoolkit with NuGet, but I would like to see the controls in the toolbox, so I can drag the controls in. How is this done?
It's located in the packages folder created by Visual Studio 2012 after you use NuGet Package Manager to download it.
Create a tab in Visual Studio (you can name it Ajax Toolkit).
Right click on it and select: Choose Items..
Click Browse and navigate to the packages folder that Visual Studio 2012 creates with your source. Something like this: ..\packages\AjaxControlToolkit.7.0123\lib\40\AjaxControlToolkit.dll
Select AjaxControlToolKit.
I just installed it in Visual Studio 2013. Here's a summary of the process:
Click on solution and Manage Nuget Packages
Filter for AJAX and select the Ajax Control Toolkit
After NuGet installs this, it won't be in the toolbox!
Create a new toolbox group for AJAX CONTROL TOOLKIT
Add Items
Browse
Navigate to the toolkit URL. Project is Webapplication1 in the c:\temp folder so the toolkit was in: C:\temp\WebApplication1\packages\AjaxControlToolkit.7.1213\lib\45 (because I am using framework 4.5)
Click OK and the toolbox should be populated.
Slight sort cut for finding the dll folder, for example step 7 in the instruction set given by user3546149.
(Good job, I would up vote your answer but no reputation).
AjaxControlTookkit should show under References for the project. Right click it and select Properties. The Path property is the path to the AjaxControlToolkit.dll. Copy that Path property.Then for step 7 paste the Path property directly in the search box. Saves eye strain and clickity click oops syndrome.
(Works for VS 2013 also, maybe others).
The current version of the AJAX Control Toolkit does everything to install itself into the VS toolbox. First exit out of VS (it will tell you to exit if you don't) then click the Download button in AJAX Control Toolkit.
To install Ajax Control Toolkit, run the following command in the Package Manager Console
PM> Install-Package AjaxControlToolkit
this is install the Ajaxtoolkit in your current project..
I'm using visual studio 2012 and I don't find the button start for debugging.
Instead, there a button "Attach".
How is it possible to enable Start button.
I have only one project in the solution that I imported from vs2010.
When a create a new project from scratch, Start is available.
You can solve this issue by right clicking the project in Visual Studio and setting it as the 'StartUp Project'.
I had this problem and it turned out that, even though the status bar was blank, it was still building (reeeeally slowly).
I'm trying to move a solution I have over to Visual Studio 2012 and one of the project types is .vdproj.
According to this link this project type is not supported in Visual Studio 2012:
MSDN says they recommend that you use InstallShield Limited Edition for Visual Studio.
The problem is, when I open up my solution in VS2012 and try to add a new "Enable InstallShield Limited Edition" project to my solution, I get an error message saying:
Creating project 'test'...project creation failed.
Why might I not be able to add a project of this type to my solution?
If I make a new empty solution I can't make an InstallShield project it in either.
I'm going to try to download InstallShield limited edition and see if it does anything.
I tried out that InstallShield download, and it added two extra project types, but I'm unable to create either of them. I'm able to add normal website projects to my solutions just fine, but not deployment projects.
The installer was named the same, but this one prompted me to re-start. After re-starting I was able to add an InstallShield project, but it gets created in its own solution. So, it looks like now I have to figure out how to use it, and I'll be good to go.
It's looking like the limited edition doesn't have support to install Windows services.
This will probably be long and boring because there's lots of steps, but I'd like to write up how to move from a Windows service installer .vdproj to the new InstallShield LE that's available in Visual Studio 2012.
Step 1: Create a merge module (.msm)
Follow the steps of this guide.
Notes:
You will need to install WiX 3.6 and isWiX
The latest release of IsWiX doesn't enable the Tools menu item in Visual Studio 2012. Edit the file: C:\ProgramData\Microsoft\MSEnvShared\AddIns\IsWiXAddin.Addin (XML) and clone the HostApplication element and update 10.0 to 11.0.
In step #8 of the guide, it references a code tab. This has been moved to the XML Editor item in the bottom of the left menu
I left the MergeRedirectFolder empty for my installation
Here is my isWix files view:
After you're done with the guide you should have an empty .wxs file that looks something like this:
Using the Component XML element pulled from here you should end up with a .wxs file that looks like this:
Hit build and you should now have a .msm file.
Step 2: Adding merge module to InstallShield
Go though the wizard to setup the basic install information like company and version information.
Find the redistributables view in ISLE. Right click the list and select browse for module. After your module is found and added, right click the modules and select properties. Set the destination folder drop down to INSTALLDIR. I had to set mine to the lowest level folder I created for my install path, so you might have to experiment a bit.
Build Project, and test on virtual machine
Redistributables Screen
If you're getting errors about the path being too long you might need to change the release location to something close to the root.
Here's a list of all the build errors for reference.
Now you should be able to run your installer and have it install/start a Windows service. A lot more work than .MSI files, we got it to generate in Visual Studio 2010, but overall it was not too bad.
While there is no easy or truly supported solution for Visual Studio 2012, Visual Studio 2013 users can get an extension from Microsoft in the Visual Studio Gallery.
I found this post which says you must download InstallShield first. It's a very confusing way to work. I suggest to vote up the post on the connect site and give them comments letting know how poor that is. They could at least give a more descriptive error http://connect.microsoft.com/VisualStudio/feedback/details/732196/project-creation-failed-for-installshield-limited-edition#tabs