I have been searching on the internet this error about excel.
"Excel found unreadable content in filename.xls. Do you want to recover the contents of this workbook? If you trust the source of this workbook, click Yes."
When I go to Microsoft Support website, I saw this solution
http://support.microsoft.com/kb/929766/en-us
In this page it says "To resolve this issue, remove the expressions from all Current Time Member and weight on the KPI properties." I did not understand what to do exactly. Please help me
This is an old question but I wanted to say that. There are lots of ways which you can see this error. Firstly, your computer's clock. you should set it to your terratory. Secondly the Excel version. You should use a formal instance of Microsoft Excel. If you do not want to deal with Microsoft, LibreOffice is free and full of good features. You should try that.
Click yes, save under a new filename, and check the contents match what you expect. If you're able to restore using "Restore previous versions" (right click on the file in explorer) then that's an option as well.
Related
Please help. For some reasons, any Excel file that contains Macro does not work stating that the "The Macro may not be available in this workbook or all macros may be disable". I changed the settings in the trust center but with no luck, still does not run at all.
Many thanks,
This is a little late, but posting for others that may be looking for a solution. Try the solution posted at the link below: browse to the location of the file and open the file under the option "Open and Repair", this repaired the hidden macros for me. enter image description here
https://www.stellarinfo.com/blog/fix-excel-error-unable-to-save-excel-workbook/
I googled around and found no answer for what I think should be an obvious question/problem, so I'll ask here.
I have an ExCel spreadsheet that I want to share with a couple other guys. Version, as far as I can tell, is "Office 365 ProPlus" (sorry if that's wrong, I'm a linux guy). I do the vast majority of the writing/editing, the other guys mostly just read it. I put it on a shared drive. But when they open it, it opens in edit mode and I'm locked out because one of the other guys (who just wanted to read it) opened it and the default open mode is edit.
I want to change the default open mode to be read_only. If I want to open for edit, I don't mind clicking a few times to get to that point. But what I can't have is being locked out because the read_only guys have it locked. If they have it locked because they're making changes, that's fine. But for the 95% of the time, where I write and they read, I don't want them to unintentionally lock the thing when all they want to do is read.
Is this sort of thing possible ? Can I configure this ?
You may save your document as "Read-only recommended" and get your friends to open it read-only whenever they do not need to edit the document:
For the new versions (2013 & 2016), while Saving or Saving As your file press Browse button, go to Tools | General Options and select the Read-only recommended check box. If you want you may enter a password too. After this, the users will be recommended to open the document as read only; if they want, they may still open the file in edit mode.
In addition you may use the shared workbook feature of Excel which allows multi users to edit the document at the same time. And using this way you may track which changes are made when and by whom too.This feature can be activated using Review / Share Workbook button. If you have a newer version of Excel, this button is hidden, you may unhide it using the instructions here: unhide shared workbook
Old post but I just had the same question and landed here. I was also suspecting the Office version but it turns out that's not it. I figured it out that instead of going to the File-Properties you have to go to the "Save As..." dialog box, and there, next to the Save / Cancel buttons, is the Tools... dialog where you can set a "Read-only recommended" check mark.
I think the implication is that it's not a document property, it's a windows file property - that's why it's not in the File-Options menu.
After I found it, I remembered that this is how I always used to do it in old versions of Excel many years ago, so it's really unchanged.
I don´t understand why, but it´s the second or third time I've lost my Personal Workbook with all my macro copies. The only different thing that I've done was editing a macro but, when excel was closing, I haven't saved the changes. Next time I've opened excel, surprise, surprise, no Personal Workbook! Has anyone had the same problem? Does anyone know why it happens? I have already searched in (I believe so) all possible folders where It could be stored.
Thanks!
the file can be found for 2007/2010 users in :
C:\Users\User ID\AppData\Roaming\Microsoft\Excel\XLSTART
or somewhere similar for others.
Hope this helps
The folder where the personal macros are saved can be found by using the command:
?Application.StartupPath (without "" sign) in VBA.
Open VBA (ALT+F11) and enter the command in the field on the bottom.
Hope this helped
Using Microsoft office 365. Lost Excel and Word Macros during last update. Had an Excel File that I had copied to my laptop (Windows 10) which had not been updated. Brought it up on my desktop. Was able to see modules but no content. Was unable to remove modules. Uninstalled Office 365. After reinstall, was able to see and use macros from that file. Word macro not retrieved. Hope it helps someone.
Mine went missing completely and was not in the xlstart folder. I finally discovered it was because I'm on a work server, files are all network storage based, and I had just changed my network password. I think the mis-match caused my links to personal files to be temporarily broken. I logged out completely, and back in, and everything was back where it should be.
In short: I tried turning it off and turning it back on again.
For those using MacOS / OSX (El Capitan) with Excel 2016 I located my copy of Personal Macro Workbook.xlsb, which I had previously unhidden in Excel, then closed, in the following location:
~/Library/Containers/com.microsoft.Excel/Data/Application Support/User/Personal Macro Workbook.xlsb
Please note that I used multiple search functions within OSX which did not return this file in the search results for some reason.
We would like to export a view of a custom SharePoint list to Excel on a repeatable basis, and with some minor formatting.
I have made a .iqy file by using Actions/Export to Spreadsheet from the view menu, and then uploaded this .iqy file back into SharePoint. When users click on it, it does bring up the data in Excel - but without the headings repeated each page, with the columns spilling onto a second page (width-wise), etc.
The .iqy file seems to be a plain text file which can be opened in Notepad so perhaps there is a way of passing parameters to Excel through this which would do the trick? Does someone know?
Alternatively, I also saved one of the resultant spreadsheets from opening the .iqy file, applied some formatting to it, and then uploaded that back into SharePoint. I set it to refresh the data connection on opening and I think this is working ok except there are two frustrations.
Firstly, by default, Excel says it has blocked data connections and I need to manually enable them. Is there a way to prevent this short of editing the trust centre settings on each computer that will open this spreadsheet?
Secondly, when I click on the spreadsheet in SharePoint we are asked if we wish to open the document for editing or read only. Ideally, I'd like to just give the user the opportunity to open or save the document (and certainly not to save it back on to the server, as I expect Edit would do.)
Does anyone have any sage advice for me that would make either the first attempt (.iqy file) or the second attempt (formatted spreadsheet) work successfully? Or maybe you have other, better ideas?
Thank you,
Regards,
David W
An Excel Web Query (iqy) is just not going to work. Its only purpose is to define a "web query" for Excel to open.
First frustration, I am not positive, but digitally signing the workbook may avoid the blocked data connection prompt. Also, if I remember correctly, there is a Global Policy setting for this, so if you are part of a domain, you can have this setting changed when the user logs into the domain.
Second frustration. Not much you can do here.
Suggestions, all kinds. We would need to understand your requirements and constraints. But, I suggest you dynamically create the workbook using XMLSS. You have full control over formatting, layout, and nearly everything else, without the need to have Excel installed on the server. The served workbook must then be saved locally and cannot be saved back to server.
See XML Spreadsheet Reference at
http://msdn.microsoft.com/en-us/library/aa140066(office.10).aspx
Here is a search for "visual basic asp xml workbooks site:microsoft.com",
http://www.bing.com/search?q=visual+basic+asp+xml+workbooks+site%3Amicrosoft.com. Search for ASP generates more results. Note it is easy to translate/migrate to ASP.NET so do not let the ASP throw you.
I recommend starting with Using Visual Basic and ASP with XML to Generate Excel 2003 Workbooks at http://msdn.microsoft.com/en-us/library/aa203722(office.11).aspx, especially near the end of the article because there is an example on creating a workbook and setting the page print orientation. Moreover, there is an example on how to create a template.
So I'm having to run someone else's excel app on my PC, and I'm getting "Can't find Project or Library" on standard functions such as date, format, hex, mid, etc.
Some research indicates that if I prefix these functions with "VBA." as in "VBA.Date" then it'll work fine.
Webpages suggest it has to do with my project references on my system, whereas they must be ok on the developer's system. I'm going to be dealing with this for some time from others, and will be distributing these applications to many others, so I need to understand what's wrong with my excel setup that I need to fix, or what needs to be changed in the xls file so that it'll run on a variety of systems. I'd like to avoid making everyone use "VBA." as an explicit reference, but if there's no ideal solution I suppose that's what we'll have to do.
How do I make "VBA." implicit in my project properties/references/etc?
-Adam
I have seen errors on standard functions if there was a reference to a totally different library missing.
In the VBA editor launch the Compile command from the menu and then check the References dialog to see if there is anything missing and if so try to add these libraries.
In general it seems to be good practice to compile the complete VBA code and then saving the document before distribution.
I had the same problem. This worked for me:
In VB go to Tools » References
Uncheck the library "Crystal Analysis Common Controls 1.0". Or any library.
Just leave these 5 references:
Visual Basic For Applications (This is the library that defines the VBA language.)
Microsoft Excel Object Library (This defines all of the elements of Excel.)
OLE Automation (This specifies the types for linking and embedding documents and for automation of other applications and the "plumbing" of the COM system that Excel uses to communicate with the outside world.)
Microsoft Office (This defines things that are common to all Office programs such as Command Bars and Command Bar controls.)
Microsoft Forms 2.0 This is required if you are using a User Form. This library defines things like the user form and the controls that you can place on a form.
Then Save.
I have experienced this exact problem and found, on the users machine, one of the libraries I depended on was marked as "MISSING" in the references dialog. In that case it was some office font library that was available in my version of Office 2007, but not on the client desktop.
The error you get is a complete red herring (as pointed out by divo).
Fortunately I wasn't using anything from the library, so I was able to remove it from the XLA references entirely. I guess, an extension of divo' suggested best practice would be for testing to check the XLA on all the target Office versions (not a bad idea in any case).
In my case, it was that the function was AMBIGUOUS as it was defined in the VBA library (present in my references), and also in the Microsoft Office Object Library (also present). I removed the Microsoft Office Object Library, and voila! No need to use the VBA. prefix.
In my case, I could not even open "References" in the Visual Basic window. I even tried reinstalling Office 365 and that didn't work. Finally, I tried disabling macros in the "Trust Center" settings. When I restarted Excel, I got the warning message that macros were disabled, and when I clicked on "enable" I no longer got the error message.
Later I re-enabled all macros in the "Trust Center" settings, and the error message didn't show up!
Hey, if nothing else works for you, try the above; it worked for me! :)
Update:
The issue returned, and this is how I "fixed" it the second time:
I opened my workbook in Excel online (Office 365, in the browser, which doesn't support macros anyway), saved it with a new file name (still using .xlsm file extension), and reopened in the desktop software. It worked.
Even when all references are fine the prefix problem causes compile errors.
What about creating a find and replace sub for all 'built-in VBA functions' in all modules,
like this:
replace text in code module
e.g. "= Date" will be replaced with "= VBA.Date".
e.g. " Date(" will be replaced with " VBA.Date(" .
(excluding "dim t As Date" or "mydate")
All vba functions for find and replace are written here :
vba functions list
For those of you who haven't found any of the other answers work for you.
Try this:
Close out of the file, email it to yourself or if you're at work, paste it from the network drive to your desktop, anything to get it to open in "protected mode".
Now open the file
DON'T CLICK ANY ENABLE EDITING OR THE YELLOW RIBBON
Go to the VBA Editor
Go to Debug - - Compile VBA Project, if "Compile VBA Project" is greyed out, then you may need to click the yellow ribbon one time to enable the content, but DO NOT enable macros.
After you click Compile, save, close out of the file. Reopen it, enable everything and it should be OK. This has worked for me 100% of the time.
In my case I was checking work done on my office computer (with Visio installed) at home (no Visio). Even though VBA appeared to be getting hung up on simple default functions, the problem was that I had references to the Visio libraries still active.
I found references to an AVAYA/CMS programme file? Totally random, this was in MS Access, nothing to do with AVAYA. I do have AVAYA on my PC, and others don't, so this explains why it worked on my machine and not others - but not how Access got linked to AVAYA. Anyway - I just unchecked the reference and that seems to have fixed the problem
I've had this error on and off for around two years in a several XLSM files (which is most annoying as when it occurs there is nothing wrong with the file! - I suspect orphaned Excel processes are part of the problem)
The most efficient solution I had found has been to use Python with oletools
https://github.com/decalage2/oletools/wiki/Install and extract the VBA code all the modules and save in a text file.
Then I simply rename the file to zip file (backup just in case!), open up this zip file and delete the xl/vbaProject.bin file. Rename back to XLSX and should be good to go.
Copy in the saved VBA code (which will need cleaning of line breaks, comments and other stuff. Will also need to add in missing libraries.
This has saved me when other methods haven't.
YMMV.