I have the following CSV file
more file.csv
Number,machine_type,OS,Version,Mem,CPU,HW,Volatge
1,HG652,linux,23.12,256,III,LOP90,220
2,HG652,linux,23.12,256,III,LOP90,220
3,HG652,SCO,MK906G,526,1G,LW1005,220
4,HG652,solaris,1172,1024,2Core,netra,220
5,HG652,solaris,1172,1024,2Core,netra,220
Please advice how to cut CSV file ( by cut or sed or awk command )
in order to get a partial CSV file
Command need to get value that represent the fields that we want to cut from the CSV
According to example 1 ( value should be 6 )
Example 1
on this example we cut the 6 fields from left to right , ( in this case CSV will look like this )
Number,machine_type,OS,Version,Mem,CPU
1,HG652,linux,23.12,256,III
2,HG652,linux,23.12,256,III
3,HG652,SCO,MK906G,526,1G
4,HG652,solaris,1172,1024,2Core
5,HG652,solaris,1172,1024,2Core
cut is your friend:
$ cut -d',' -f-6 file
Number,machine_type,OS,Version,Mem,CPU
1,HG652,linux,23.12,256,III
2,HG652,linux,23.12,256,III
3,HG652,SCO,MK906G,526,1G
4,HG652,solaris,1172,1024,2Core
5,HG652,solaris,1172,1024,2Core
Explanation
-d',' set comma as field separator
-f-6 print up to the field number 6 based on that delimiter. It is equivalent to -f1-6, as 1 is default.
Also awk can make it, if necessary:
$ awk -v FS="," 'NF{for (i=1;i<=6;i++) printf "%s%s", $i, (i==6?RS:FS)}' file
Number,machine_type,OS,Version,Mem,CPU
1,HG652,linux,23.12,256,III
2,HG652,linux,23.12,256,III
3,HG652,SCO,MK906G,526,1G
4,HG652,solaris,1172,1024,2Core
5,HG652,solaris,1172,1024,2Core
the cut commandline is rather simple and well suited in your case:
cut -d, -f1-6 yourfile
So everybody agrees to say that the cut way is the best way to go in this case. But we can also talk about the awk solution, and there I may point out that in fedorqui's answer, a clever trick is used to silence empty lines (NF as a selection pattern), but it has the disadvantage of e.g. removing blank lines from the original file. I propose below another solution (en passant, using the -F option instead of the variable passing mechanism on FS that preserves any empty line and also respects lines with less than 6 fields, e.g. prints these lines without adding extra commas there:
awk -F, '{min=(NF>6?6:NF); for (i=1;i<=min-1;i++) printf "%s,", $i; printf "%s\n", $6}' yourfile
This works nicely because printf-ing $6 is never an error, even in case the line has less than 6 fields. This is true with my gawk 4.0.1, at least...
Related
I have a text file like this:
first state
second state
third state
Getting the first word from every line isn't difficult, but the problem comes when adding the extra \n required to separate every word (selection) in dmenu, per its syntax:
echo -e "first\nsecond\nthird" | dmenu
I haven't been able to figure out how to add the separating \n. I've tried this:
state=$(awk '{for(i=1;i<=NF;i+=2)print $(i)'\n'}' text.txt)
But it doesn't work. I also tried this:
lol=$(grep -o "^\S*" states.txt | perl -ne 'print "$_"')
But same deal. Not sure what I'm doing wrong.
Your problem is in the AWK script. You need to identify each input line as a record. This way, you can control how each record in the output is separated via the ORS variable (output record separator). By default this separator is the newline, which should be good enough for your purpose.
Now to print the first word of every input record (each line in the input stream in this case), you just need to print the first field:
awk '{print $1}' textfile | dmenu
If you need the output to include the explicit \n string (not the control character), then you can just overwrite the ORS variable to fit your needs:
awk 'BEGIN{ORS="\\n"}{print $1}' textfile | dmenu
This could be more easily done in while loop, could you please try following. This is simple, while is reading the file and during that its creating 2 variables 1st is named first and other is rest first contains first field which we are passing to dmenu later inside.
while read first rest
do
dmenu "$first"
done < "Input_file"
Based on the text file example, the following should achieve what you require:
awk '{ printf "%s\\n",$1 }' textfile | dmenu
Print the first space separated field of each line along with \n (\n needs to be escaped to stop it being interpreted by awk)
In your code
state=$(awk '{for(i=1;i<=NF;i+=2)print $(i)'\n'}' text.txt)
you attempted to use ' inside your awk code, however code is what between ' and first following ', therefore code is {for(i=1;i<=NF;i+=2)print $(i) and this does not work. You should use " for strings inside awk code.
If you want to merely get nth column cut will be enough in most cases, let states.txt content be
first state
second state
third state
then you can do:
cut -d ' ' -f 1 states.txt | dmenu
Explanation: treat space as delimiter (-d ' ') and get 1st column (-f 1)
(tested in cut (GNU coreutils) 8.30)
I'm using code from this question How To Delete All Words After X Characters and I'm having a trouble keeping (not deleting) all the words after 30 characters.
Original code:
awk 'BEGIN{FS=OFS="" } length>30{i=30; while($i~/\w/) i++; NF=i-1; }1'
My attempt:
awk 'BEGIN{FS=OFS="" } length>30{i=30; while($i~/\w/) i++; NF=i+1; }1'
Basically, I understand I need to change the NF which was NF=i-1 so I tried changing it to NF=i+1 but obviously I'm only getting one field. How can I specify NF to print the rest of the line?
Sample data:
StackOverflow Users Are Brilliant And Hard Working
#character 30 ---------------^
Desired output:
And Hard Working
If you could please help me keep the rest of the line by using NF, I would really appreciate your positive input and support.
It is much easier using gnu grep:
grep -oP '^.{30}\w*\W*\K.*' file
And Hard Working
Where \K is used for reseting matched information.
RegEx Breakup:
^: Start
.{30}: Match first 30 characters
\w*: followed by 0 or more word characters
\W*: followed by 0 or more non-word characters
\K: reset matched information so far
.*: Match anything after this position
Using awk you can use this solution:
awk '{sub(/^.{30}[_[:alnum:]]*[[:blank:]]*/, "")} 1' file
And Hard Working
Finally a sed solution:
sed -E 's/^.{30}[_[:alnum:]]*[[:blank:]]*//' file
And Hard Working
another awk
awk '{print substr($0, index(substr($0,30),FS)+30)}'
find the delimiter index after the 30th char, take a substring from that index on.
I can't imagine why your considering anything related to NF for this since you're not doing anything with fields, you're just splitting each line at a blank char. It sounds like this is all you need for both questions, using GNU awk for gensub():
$ awk '{print gensub(/(.{30}\S*)\s+(.*)/,"\\1",1)}' file
StackOverflow Users Are Brilliant
$ awk '{print gensub(/(.{30}\S*)\s+(.*)/,"\\2",1)}' file
And Hard Working
or it's briefer using GNU sed:
$ sed -E 's/(.{30}\S*)\s+(.*)/\1/' file
StackOverflow Users Are Brilliant
$ sed -E 's/(.{30}\S*)\s+(.*)/\2/' file
And Hard Working
With the use of NF, you can try
awk '{for(i=1;i<=NF;i++){a+=length($i)+1;if(a>30){for(j=i+1;j<=NF;j++)b=b $j" ";print b;exit}}}'
cut -c30- file | cut -d' ' -f2-
this will keep only the words that start after 30th character (index >= 31)
I have used sed and awk for little while now, but I am having a challenge with the below problem. I am asking for an experienced sed/awk guru to help.
I have a file where some lines have numbers and some lines do not, like:
afjjdjfj.uihuihi
trfg.rtyhd
0rtgfd.tjbghhh
hbvfd4.rtgbvdgf
00fhfg.fdrgf
rtygfd.ijhniuh
etc.
I would like to have exactly two files out of this one, where every line is represented in one of the two files (none are deleted).
One containing all lines with any numbers 0-9 on them so given above file result would be:
0rtgfd.tjbghhh
hbvfd4.rtgbvdgf
00fhfg.fdrgf
and another file containing the rest of the lines that do not have any numbers 0-9 on them, so given the above, file it would be:
afjjdjfj.uihuihi
trfg.rtyhd
rtygfd.ijhniuh
I've tried different strategies in both sed and awk and nothing is giving me exactly what I need.
What would be the best sed or awk one liner to solve this problem?
Thank you for your time,
Tom
Easily with Awk:
awk '/[0-9]/{print > file1; next} {print > file2}' inputfile
With single GNU sed command:
sed -ne '/[0-9]/w with_digits.txt' -e '//!w no_digits.txt' input
Results:
> cat no_digits.txt
afjjdjfj.uihuihi
trfg.rtyhd
rtygfd.ijhniuh
> cat with_digits.txt
0rtgfd.tjbghhh
hbvfd4.rtgbvdgf
00fhfg.fdrgf
w filename Write the pattern space to filename.
If you don't mind running twice over the input, you can use just grep:
grep '[0-9]' input > with_digits
grep -v '[0-9]' input > without_digits
perl -MFile::Slurp -lpe '/\d/ ? append_file("digits.txt",$_) : append_file("no_digits.txt",$_)' input.txt
I want to cut several numbers from a .txt file to add them later up. Here is an abstract from the .txt file:
anonuser pts/25 127.0.0.1 Mon Nov 16 17:24 - crash (10+23:07)
I want to get the "10" before the "+" and I only want the number, nothing else. This number should be written to another .txt file. I used this code, but it only works if the number has one digit:
awk ' /^'anonuser' / {split($NF,k,"[(+0:)][0-9][0-9]");print k[1]} ' log2.txt > log3.txt
With GNU grep:
grep -Po '\(\K[^+]*' file > new_file
Output to new_file:
10
See: PCRE Regex Spotlight: \K
What if you use the match() function in awk?
$ awk '/^anonuser/ && match($NF,/^\(([0-9]*)/,a) {print a[1]}' file
10
How does this work?
/^anonuser/ && match() {print a[1]} if the line starts with anonuser and the pattern is found, print it.
match($NF,/^\(([0-9]*)/,a) in the last field ((10+23:07)), look for the string ( + digits and capture these in the array a[].
Note also that this approach allows you to store the values you capture, so that you can then sum them as you indicate in the question.
The following uses the same approach as the OP, and has a couple of advantages, e.g. it does not require anything special, and it is quite robust (with respect to assumptions about the input) and maintainable:
awk '/^anonuser/ {split($NF,k,/+/); gsub(/[^0-9]/,"",k[1]); print k[1]}'
for anything more complex use awk but for simple task sed is easy enough
sed -r '/^anonuser/{s/.*\(([0-9]+)\+.*/\1/}'
find the number between a ( and + sign.
I am not sure about the format in the file.
Can you use simple cut commands?
cut -d"(" -f2 log2.txt| cut -d"+" -f1 > log3.txt
I have a file containing many lines, and I want to display only the first word of each line with the Linux commands.
How can I do that?
You can use awk:
awk '{print $1}' your_file
This will "print" the first column ($1) in your_file.
Try doing this using grep :
grep -Eo '^[^ ]+' file
try doing this with coreutils cut :
cut -d' ' -f1 file
I see there are already answers. But you can also do this with sed:
sed 's/ .*//' fileName
The above solutions seem to fit your specific case. For a more general application of your question, consider that words are generally defined as being separated by whitespace, but not necessarily space characters specifically. Columns in your file may be tab-separated, for example, or even separated by a mixture of tabs and spaces.
The previous examples are all useful for finding space-separated words, while only the awk example also finds words separated by other whitespace characters (and in fact this turns out to be rather difficult to do uniformly across various sed/grep versions). You may also want to explicitly skip empty lines, by amending the awk statement thus:
awk '{if ($1 !="") print $1}' your_file
If you are also concerned about the possibility of empty fields, i.e., lines that begin with whitespace, then a more robust solution would be in order. I'm not adept enough with awk to produce a one-liner for such cases, but a short python script that does the trick might look like:
>>> import re
>>> for line in open('your_file'):
... words = re.split(r'\s', line)
... if words and words[0]:
... print words[0]
...or on Windows (if you have GnuWin32 grep) :
grep -Eo "^[^ ]+" file