I collect various data in time plots. If I copy the timeplot data and then paste it into Excel, the number format is often wrong. For example, I often get a date like Aug 94 instead of the actual number from the TimePlot. Unfortunately, I can't easily format this date into a number either, since the formatted number does not match the actual number from the timeplot. If I format the date in the same format as the number above and below, then I get the number 34547. However, this number does not correspond to the actual number of the TimePlot. Anyone know how I can prevent this problem?
You can only solve this on the Excel side, AnyLogic provides the raw data for you. Excel then interprets stuff. You can test it by pasting the chart raw data into a txt or csv file.
So either fix your Excel settings or paste into a csv, then into an xlsx.
Or better still: Do not manually paste at all. Instead, write your model results into the AnyLogic database and export to Excel from there: this takes away a lot of the pain for you. Check the example models to learn how to do that.
This is not AnyLogic question, rather an Excel & computer formatting problem. One way of resolving this is changing computer's date and time settings.
Another way is to save your output at txt file in AnyLogic. Replace all . with ,. Then open empty Excel, select Text format for the columns. Copy-paste from the txt file.
In Excel there are a few options
when you paste use paste as text only option
But this does not always work as Excel will still try to format the stuff for you
Use the Paste Special option and then choose text
Also possible this will not work, based on your Excel settings.
Paste using the text import wizard
(This works for me without fail)
On step 2 choose tab delimited
On step 3 choose Column format as text for every column (you need to select them in the little diagram below)
You will then see the data exactly as it came from AnyLogic. See the example below where I purposefully imported some text which has something that Excel will think is a date. You will now be able to see what in your data made Excel thing your data needed to be formatted the way it is and then you can fix it. (post a new question if you struggle with this conversion)
But as noted by other answers first prize is to write all the important data to external files. But I know that even I sometimes want to export data from a chart and review it in Excel. Option 3 works for me everytime
I have this data that I exports from some ERP in Citrix to the same Excel in Citrix,
Some example when i paste:
Doc.Curr.
-4,248,057.00
-25,998,733.00
25,998,733.00
-192,534.00
-118,509.00
192,534.00
But when i export this to a Excel in MacOS doesnt recognize like a number format, only like data without format, how can i solve this?
Many systems that export to Excel produce text instead of number. This has to do with the way that the system report was built in the exporting system. For example, the system report uses spaces to separate report columns. Excel parses the data according to the spacing but will not convert the text to numbers. In such a case you need to do that yourself
There are several ways to convert text to numbers, including
copy a cell with a zero, use paste special to paste over the text that should be numbers, using the option to "Add"
use text to columns on one column of numbers
If you need to do that on a regular basis, you may want to look into Power Query (Get and Transform) to load the data and perform any cleanup in there. It will be faster in the long run.
Is there a simple way to design a form for displaying (and printing on A4) data from an Excel sheet?
Lets say there are 200 rows in the Excel with 4 columns. I would like to make each row more readable by rearranging it like this on A4 paper (see attached diagram), instead of just printing in tabular form straight from Excel.
Can that be done without programming, but only field mapping from a form to Excel sheet?
Data entry not required. View and print only.
A4 printed output should look like this
I think you are out of luck with Excel unless you can write a VBA macro to rearrange the table data.
One option is to use a Reporting tool e.g. you can link/import the Excel data into Access and build a Report, which will allow you freedom to show each record as you like.
You could do a mail merge into Word, as if you're printing labels on a form. It's the same idea, just different data.
There are many examples online, no coding necessary.
Here's one from Microsoft, with plenty of links within in:
How to use the Mail Merge feature in Word to create and to print form letters that use the data from an Excel worksheet
I have a form that has TinyMCE for richtext formatting. All of our data is available to export as an HTML report, PDF Report, and Excel Spreadsheet (report).
The fields, that we allow richtext in, show up as the formatted values in both the HTML and PDF reports, but in Excel we show them as strings. For instance:
<b>this part is bold</b><br />line 2 here.
I need a way to make that show up as bold/line-break in excel rather then just showing that string, or at least a way to strip the HTML tags out of there and just show plain text (though I would really like to at least keep the line breaks). Is there some type of macro I can include in the excel download or some C++ program that can convert it or something?
Thanks for your time!
I've done something similar with PHPExcel
The trick is to take your formatted data and find a pattern. In your case, it would probably be table rows/table cells. Iterate through that structure setting the excel cell values as you go. For complex formatting you could fairly simply regex replace what is necessary to get formatted as you desire. The theory may sound a little complicated, but once you get down to it, it's only an hour or two's worth of work.
Certainly there are equivalent programs based on other server technologies. But this one has worked brilliantly for me over the years, and I trust it to work on sites for very big clients with crazy inbound traffic numbers...and it's never failed. It's the only reliable way I've found to write perfect, properly formatted Excel without requiring the user to jump through hoops to get a specific browser.
This question is long winded because I have been updating the question over a very long time trying to get SSIS to properly export Excel data. I managed to solve this issue, although not correctly. Aside from someone providing a correct answer, the solution listed in this question is not terrible.
The only answer I found was to create a single row named range wide enough for my columns. In the named range put sample data and hide it. SSIS appends the data and reads metadata from the single row (that is close enough for it to drop stuff in it). The data takes the format of the hidden single row. This allows headers, etc.
WOW what a pain in the butt. It will take over 450 days of exports to recover the time lost. However, I still love SSIS and will continue to use it because it is still way better than Filemaker LOL. My next attempt will be doing the same thing in the report server.
Original question notes:
If you are in Sql Server Integrations Services designer and want to export data to an Excel file starting on something other than the first line, lets say the forth line, how do you specify this?
I tried going in to the Excel Destination of the Data Flow, changed the AccessMode to OpenRowSet from Variable, then set the variable to "YPlatters$A4:I20000" This fails saying it cannot find the sheet. The sheet is called YPlatters.
I thought you could specify (Sheet$)(Starting Cell):(Ending Cell)?
Update
Apparently in Excel you can select a set of cells and name them with the name box. This allows you to select the name instead of the sheet without the $ dollar sign. Oddly enough, whatever the range you specify, it appends the data to the next row after the range. Oddly, as you add data, it increases the named selection's row count.
Another odd thing is the data takes the format of the last line of the range specified. My header rows are bold. If I specify a range that ends with the header row, the data appends to the row below, and makes all the entries bold. if you specify one row lower, it puts a blank line between the header row and the data, but the data is not bold.
Another update
No matter what I try, SSIS samples the "first row" of the file and sets the metadata according to what it finds. However, if you have sample data that has a value of zero but is formatted as the first row, it treats that column as text and inserts numeric values with a single quote in front ('123.34). I also tried headers that do not reflect the data types of the columns. I tried changing the metadata of the Excel destination, but it always changes it back when I run the project, then fails saying it will truncate data. If I tell it to ignore errors, it imports everything except that column.
Several days of several hours a piece later...
Another update
I tried every combination. A mostly working example is to create the named range starting with the column headers. Format your column headers as you want the data to look as the data takes on this format. In my example, these exist from A4 to E4, which is my defined range. SSIS appends to the row after the defined range, so defining A4 to E68 appends the rows starting at A69. You define the Connection as having the first row contains the field names. It takes on the metadata of the header row, oddly, not the second row, and it guesses at the data type, not the formatted data type of the column, i.e., headers are text, so all my metadata is text. If your headers are bold, so is all of your data.
I even tried making a sample data row without success... I don't think anyone actually uses Excel with the default MS SSIS export.
If you could define the "insert range" (A5 to E5) with no header row and format those columns (currency, not bold, etc.) without it skipping a row in Excel, this would be very helpful. From what I gather, noone uses SSIS to export Excel without a third party connection manager.
Any ideas on how to set this up properly so that data is formatted correctly, i.e., the metadata read from Excel is proper to the real data, and formatting inherits from the first row of data, not the headers in Excel?
One last update (July 17, 2009)
I got this to work very well. One thing I added to Excel was the IMEX=1 in the Excel connection string: "Excel 8.0;HDR=Yes;IMEX=1". This forces Excel (I think) to look at all rows to see what kind of data is in it. Generally, this does not drop information, say for instance if you have a zip code then about 9 rows down you have a zip+4, Excel without this blanks that field entirely without error. With IMEX=1, it recognizes that Zip is actually a character field instead of numeric.
And of course, one more update (August 27, 2009)
The IMEX=1 will succeed importing data with missing contents in the first 8 rows, but it will fail exporting data where no data exists. So, have it on your import connection string, but not your export Excel connection string.
I have to say, after so much fiddling, it works pretty well.
P.S. If you are using a x64 bit version, make sure you call the DTExec from C:\Program Files\Microsoft SQL Server\90\DTS.x86\Binn. It will load the 32 bit Excel driver and work fine.
Would it be easier to create the Excel Workbook in a script task, then just pick it up later in the flow?
The engine part of SSIS is good but the integration with Excel is awful
"Using SSIS in conjunction with Excel is like having hot tar funnelled up your iHole in a road cone"
Dr. Zim, I believe you were the one that originally brought up this question. I totally feel your pain. I love SSIS overall, but I absolutely hate the limited tools that come standard for Excel. All I want to do is Bold the Heading or Row1 record in Excel, and not bold the following records. I have not found a great way to do that; granted I am approaching this with no script tasks or custom extensions, but you would think something this simple would be a standard option. Looks like I may be forced to research and program up something fancy for a task that should be so fundamental. I've already spent a rediculous amount of time on this myself. Does anyone know if you can use Excel XML with Excel versions: 2000/XP/2003? Thanks.
This is an old thread but what about using a flat file connection and writing the data out as a formatted html document. Set the mime type in the page header to "application/excel". When you send the document as an attachment and the recipient opens the attachment, it will open a browser session but should pop Excel up over the top of it with the data formatted according to the style (CSS) specified in the page.
Can you have SSIS write the data to an Excel sheet starting at A1, then create another sheet, formatted as you like, that refers to the other sheet at A1, but displays it as A4? That is, on the "pretty" sheet, A4 would refer to A1 on the SSIS sheet.
This would allow SSIS to do what it's good for (manipulate table-based data), but allow the Excel to be formatted or manipulated however you'd like.
When excel is the destination in SSIS, or the target export type in SSRS, you do not have much control over formatting and specifying how you want the final file to be. I have written a custom excel rendering engine for SSRS once, as my client was so strict about the format of final Excel report generated. I used 'Excel xml' to get the job done inside my custom renderer. May be you can use XML output and convert it to Excel XML using XSLT.
I understand you would rather not use a script component so perhaps you could create your own custom task using the code that a script contains so that others can use this in the future. Check here for an example.
If this seems feasible the solution I used was CarlosAg Excel Xml Writer Library. With this you can create code which is similar to using the Interop library but produces excel in xml format. This avoids using the Interop object which can sometimes lead to excel processes hanging around.
Instead of using a roundabout way to do this exercise of trying to write data to particular cell(s), format the cell(s), style them which is indeed a very tedius effort considering the support SSIS has for EXCEL, we could go the "template" way to do this.
assume we need to write data in the so & so cell with all the custom formating thats done on it. Have all the formatting in a sheet, say "SheetActual", Whereas the cells that will hold the data will actually have Lookups/ refrences/ Formulaes to refer to the original data that SSIS exports in a hidden sheet say "SheetMasterHidden" of the same Excel connection. This "SheetMasterHidden" will essentially hold the master data in default format that SSIS writes data to the excel. This way you need not worry about formatting the data runtime.
Formatting the Excel is a one time work "IF" the formatting dont change very often. If the format changes and the format is decided runtime this solution maynot go very well.
The answer is in the question. Over time, it became a progress status. However, there is SSRS that will create Excel files if you create TABLE presentations. It works pretty well too.