I am looking for few tools that can give process or thread level power consumption for the Linux OS. I am looking for something similar to top , vmstat , mpstat , activity monitor (MAC) etc along with power usage even if approximate). I have seen a tool for Andorid, PowerTutor that does a good job for specific Andorid phones. Are there similar tools that can provide statistics for laptops/desktops etc for the linux OS? Any suggestion is appreciated.
PowerPack 3.0 is a software developed by Virginia Tech for direct measurements of the power consumption of a system’s major components:
http://scape.cs.vt.edu/software/powerpack-3-0/
The PAPI Api can provide several performance counters:
http://icl.cs.utk.edu/papi/overview/index.html
Power Analyzer for the ARM processor is a joint venture of the University of Michigan, the University of Colorado:
http://web.eecs.umich.edu/~panalyzer/
I couldn't see exact power values, just a lot of meta information on power (tested od 64bit Mint Maya). Nevertheless it might be useful to you:
PowerTOP is a Linux tool to diagnose issues with power consumption and power management. In addition to being a diagnostic tool, PowerTOP also has an interactive mode where you can experiment with various power management settings for cases where the Linux distribution has not enabled those settings.
PowerTOP reports which components in the system are most likely to blame for a higher-than-needed power consumption, ranging from software applications to active components in the system. Detailed screens are available for CPU C and P states, device activity, and software activity.
For many years, PowerTOP has been used heavily by Intel, Linux distributors, and various parts of the open source community. We're hoping that our users find the second generation even more useful for their needs.
homepage
another article
installation instructions:
sudo apt-get install powertop
usage instructions
sudo powertop
I plan to develop a nice little application that will run on an arm-based embedded Linux platform; however, since that platform will be battery-powered, I'm searching for relevant information on how to handle power save.
It is kind of important to get decent battery time.
I think the Linux kernel implemented some support for this, but I can't find any documentation on this subject.
Any input on how to design my program and the system is welcome.
Any input on how the Linux kernel tries to solves this type of problem is also welcome.
Other questions:
How much does the program in user space need to do?
And do you need to modify the kernel?
What kernel system calls or APIs are good to know about?
Update:
It seems like the folks involved with the "Free Electrons" site have produced some nice presentations on this subject.
http://free-electrons.com/services/power-management/
http://free-electrons.com/docs/power
http://free-electrons.com/docs/optimizations
But maybe someone else has even more information on this subject?
Update:
It seems like Adam Shiemke's idea to go look at the MeeGo project may be the best tip so far.
It may be the best battery powered Embedded Linux project out there at this moment.
And Nokia is usually kind of good at this type of thing.
Update:
One has to be careful about Android since it has a "modified" Linux kernel in the bottom, and some of the things the folks at Google have done do not use baseline/normal Linux kernels. I think that some of their power management ideas could be troublesome to reuse for other projects.
I haven't actually done this, but I have experience with the two apart (Linux and embedded power management). There are two main Linux distributions that come to mind when thinking about power management, Android and MeeGo. MeeGo uses (as far as I can tell) an unmodified 2.6 kernel with some extras hanging on. I wasn't able to find a lot on exactly what their power management strategy is, although I suspect more will be coming out about it in the near future as the product approaches maturity.
There is much more information available on Android, however. They run a fairly heavily modified 2.6 kernel. You can see a good bit on the different strategies implemented in http://elinux.org/Android_Power_Management (as well as kernel drama). Some other links:
https://groups.google.com/group/android-kernel/browse_thread/thread/ee356c298276ad00/472613d15af746ea?lnk=raot&pli=1
http://www.ok-labs.com/blog/entry/context-switching-in-context/
I'm sure that you can find more links of this nature. Since both projects are open source, you can grab the kernel code, and probably get further information from people who actually know what they are talking about in forms and groups.
At the driver level, you need to make sure that your drivers can properly handle suspend and shut devices off that are not in use. Most devices aimed at the mobile market offer very fine-grained support to turn individual components off, and to tweak clock settings (remember, power is proportional to clock^2).
Hope this helps.
You can do quite a bit of power-saving without requiring any special support from the OS, assuming you are writing (or at least have the source code for) your application and drivers.
Your drivers need to be able to disable their associated devices and bring them back up without requiring a restart or introducing system instability. If your devices are connected to a PCI/PCIe bus, research which power states they support (D0 - D3) and what your driver needs to do to transition between these low-power modes. If you are selecting hardware devices to use, look for devices that adhere to the PCI Power Management Specification or have similar functionality (such as a sleep mode and a "wake up" interrupt signal).
When your device boots up, every device that has the ability to detect whether it is connected to anything needs to do so. If any ports or buses detect that they are not being used, power them down or put them to sleep. A port running at full power but sitting unused can waste more power than you might think it would. Depending on your particular hardware and use case, it might also be useful to have a background app that monitors device usage, identifies unused/idle resources, and acts appropriately (like a "screen saver" for your hardware).
Your application software should make sure to detect whether hardware devices are powered up before attempting to use them. If you need to access a device that might be placed in a low-power mode, your application needs to be able to handle a potentially lengthy delay in waiting for the device to wake up and respond. Your applications should also be considerate of a device's need to sleep. If you need to send a series of commands to a hardware device, try to buffer them up and send them out all at once instead of spacing them out and requiring multiple wakeup->send->sleep cycles.
Don't be afraid to under-clock your system components slightly. Besides saving power, this can help them run cooler (which requires less power for cooling). I have seen some designs that use a CPU that is more powerful than necessary by a decent margin, which is then under-clocked by as much as 40% (bringing the performance down to the original level but at a fraction of the power cost). Also, don't be afraid to spend power to save power. That is, don't be afraid to use CPU time monitoring hardware devices for opportunities to disable/hibernate them (even if it will cause your CPU to use a bit more power). Most of the time, this tradeoff results in a net power savings.
One of the most important things to think of as a power aware application developer is to avoid unnecessary timers. If possible use interrupt driven solutions instead of polled solutions. If a timer must be used then use as long poll interval as is possible.
For example if something special should be done at a certain room temperature it is unnecessary to check the temperature every 100 ms since temperature in a room changes slowly. A more reasonable polling interval is could be 60 s.
This affects the power consumption in several ways. In Linux the CPUIDLE subsystem takes the CPU (SOC) to as deep power saving state as possible depending on when it predicts the next wakeup to occur. Having a lot of timers in a system will fragment the sleep making it impossible to go to the deeper sleep states for longer periods. A typical deep sleep state for CPUIDLE turns the CPU off but keeps the RAM in self refresh. When a timer triggers the CPU will boot and serve the timer of the application.
It's not actually your topic, but it might come in handy to log your progress: i was looking for testing / measuring my embedded linux system. chris desjardins from this forum recommended me this:
I have successfully used bootchart in the past:
http://elinux.org/Bootchart
Here is a list of other things that may also help:
http://elinux.org/Boot_Time
I'm trying to do some tuning for Oracle on Linux boxes living on SAN based infrastructure. I'm looking specifically for tools that would allow us to profile IO per process (or per process tree would be even better). My questions are?
What are the tools that would be recommended for this kind of task?
What other useful metrics should I seek to measure on a SAN based infrastructure?
I have used "iotop" with great results. It gets specific info per process with IO usage.
It works like "top"
http://guichaz.free.fr/iotop/
I am not sure though if it would be reasonable to use from a Linux box that has the SAN mounted or if you wanted a tool that could run within the SAN.
Once you start to get this specialized, I've found that the easiest thing to do is to write some custom scripts that pull information from files under /proc.
If you're analysis for which you don't already have a tool that gives you the exact report you need, you're probably going to end up doing some scripting anyway, and most of the tools you'd use under Linux are just going to /proc to get their information anyway and then reformatting it for you.
If you're more into the databasey side of things, pulling info from /proc on a regular basis, adding timestamps, and recording it in a way that it can be imported into an RDBMS can be very useful. This can be particularly good if you put all of your server and process performance information into a single RDBMS, because then you can compare, arbitrary things such as the performance of the same application on different servers.
Keep in mind that if you go further with this, you my start adding information from different sources, such as IPMI monitoring of hosts, so don't do things that you'll have to undo once you're using more than /proc.
You can use sysstat utilities which are a collection of performance monitoring tools for
Linux.
From the website (perso.orange.fr/sebastien.godard/)
* Can monitor a huge number of different metrics:
1. Input / Output and transfer rate statistics (global, per device, per partition, per network filesystem and per Linux task / PID)
2. CPU statistics (global, per CPU and per Linux task / PID), including support for virtualization architectures
3. Memory and swap space utilization statistics
4. Virtual memory, paging and fault statistics
5. Per-task (per-PID) memory and page fault statistics
6. Global CPU and page fault statistics for tasks and all their children
7. Process creation activity
8. Interrupt statistics (global, per CPU and per interrupt, including potential APIC interrupt sources)
9. Extensive network statistics: network interface activity (number of packets and kB received and transmitted per second, etc.) including failures from network devices; network traffic statistics for IP, TCP, ICMP and UDP protocols based on SNMPv2 standards; support for IPv6-related protocols.
10. NFS server and client activity
11. Socket statistics
12. Run queue and system load statistics
13. Kernel internal tables utilization statistics
14. System and per Linux task switching activity
15. Swapping statistics
16. TTY device activity
17. Power management statistics
I usually use atop to monitor the load on my systems. Some features require that you patch the kernel, but it gives precise information about I/O as well as other info.
What other useful metrics should I seek to measure on a SAN based infrastructure?
CPU load. It's Main metrics for oracle database.
Depending on how low-level you want to get, System Tap could be very useful for you. It is similar to DTrace on Solaris.
Closed. This question needs to be more focused. It is not currently accepting answers.
Want to improve this question? Update the question so it focuses on one problem only by editing this post.
Closed 6 years ago.
Improve this question
Now I'm sure we're all well aware of the relative merits of Linux vs Windows Desktop. However I've heard much less about the world of embedded development. I'm mainly interested in solutions for industry and am therefore uninterested about the IPhone or Android and more interested in these two OSes.
What are the relative trade-offs between the two platforms in the embedded world? If you were considering building a box for a specific project with custom hardware, a partially customised OS and a custom app then which would you choose and why?
I would assume that Windows CE wins on tools and Linux wins on both cost and possibly performance. However this is just utter speculation. Does anyone have any facts or experience of the two?
I worked for several years at a company that provided both CE and Linux for all of their hardware, so I'm fairly familiar with both sides of this equation.
Tools: Windows CE tools certainly are better than those provided by Linux, though the linux tools are certainly getting better.
Performance: Windows CE is real-time. Linux is not. The linux kernel is not designed for determinism at all. There are extensions that you can add to get sort-of real time, but CE beats it.
Cost: This is an area of great misunderstanding. My general experience is that CE is lower cost out of the box ($1k for Platform Builder and as low as $3 per device for a shipping runtime. "What?" you ask? "Linux is free." Well, not really so much, especially in the embedded arena. Yes, there are free distributions like Debian. But there are plenty of pieces that you might need that aren't in that free category. UI frameworks like QT, Java runtimes and media codecs just as a start. Also, most Linux distributions with a commercially-backed support system (e.g. MontaVista) are far from free.
Source Availability: Linux proponents may like to say that CE is a bad choice due to lack of source code. All I can say is that in over a decade of working with CE, half of which spent doing custom kernel and driver work for custom boards, I've only ever had need for source that didn't ship with CE (they ship a vast majority of it) once. I like having source too, but Microsoft provides support, so in the rare case you might think you need that source, you can get them to fix the problem (the one time we needed source, Microsoft provided a fix, and for free - which is their model under CE.
Does this mean that CE wins every time? No. I wouldn't suggest that at all. If you are a Linux shop and you have lots of Linux experience and code assets, you'd be foolish to run out and go CE. However, if you're coming into it from scratch CE usually has a lower TCO. Developers with Win32/C# experience are more prevalent and consequently less expensive. You also get a lot more "in the box" with CE than most other distributions, meaning faster time to market if you don't already have these things done in-house already.
I'll speak for the Linux side, at least for the category of software I'm familiar with (which is RF data collection equipment). Or industrial apps vs. consumer apps.
Windows CE (and its associated tools) IMH fairly recent E) is strongly biased to creating a "Windows Experience" on a small screen. The user input mode emphasizes mouse-like actions. Logons, application selection, etc. all try to be as similar to standard Windows as possible.
If a user is driving a lift truck, or filling a picking cart, or moving material from one place to another, there's a problem.
And it's a moving target - particularly on the .NET side. The Compact .NET runtime is seriously handicapped, and important libraries (like networking, data handling, and UI) are incomplete and versions too often deprecate the previous version. . CE seems to be the stepchild in the Windows family (possibly because there's not a lot of active competition selling to the hardware integrators.)
A nice stable rows-and-columns Linux console is a pretty handy context for many (in my experience most) high-use apps on a dinky screen.
Not much good for games on your cell-phone or Zune, though.
NOTE:
I think ctacke probably speaks accurately for the hardware integrator's side. I'm more aligned with the players further down the pipe - software integrators and users.
Choice is often made largely on perception and culture, rather than concrete data. And, making a choice based on concrete data is difficult when you consider the complexity of a modern OS, all the issues associated with porting it to custom hardware, and unknown future requirements. Even from an application perspective, things change over the life of a project. Requirements come and go. You find yourself doing things you never thought you would, especially if they are possible. The ubiquitous USB and network ports open a lot of possibilities -- for example adding Cell modem support or printer support. Flash based storage makes in-field software updates the standard mode of operation. And in the end, each solution has its strengths and weaknesses -- there is no magic bullet that is the best in all cases.
When considering Embedded Linux development, I often use the iceberg analogy; what you see going into a project is the part above the water. These are the pieces your application interacts with, drivers you need to customize, the part you understand. The other 90% is under water, and herein lies a great deal of variability. Quality issues with drivers or not being able to find a driver for something you may want to support in the future can easily swamp known parts of the project. There are very few people who have a lot of experience with both WinCE and Linux solutions, hence the tendency to go with what is comfortable (or what managers are comfortable with), or what we have experience with. Below are thoughts on a number of aspects to consider:
SYSTEM SOFTWARE DEVELOPMENT
Questions in this realm include CPU support, driver quality, in field software updates, filesystem support, driver availability, etc. One of the changes that has happened in the past two years, is CPU vendors are now porting Linux to their new chips as the first OS. Before, the OS porting was typically done by Linux software companies such as MontaVista, or community efforts. As a result, the Linux kernel now supports most mainstream embedded cpus with few additional patches. This is radically different than the situation 5 years ago. Because many people are using the same source code, issues get fixed, and often are contributed back to the mainstream source. With WinCE, the BSP/driver support tends to be more of a reference implementation, and then OEM/users take it, fix any issues, and that is where the fixes tend to stay.
From a system perspective, it is very important to consider flexibility for future needs. Just because it is not a requirement now does not mean it will not be a requirement in the future. Obtaining driver support for a peripheral may be nearly impossible, or be too large an effort to make it practical.
Most people give very little thought to the build system, or never look much beyond the thought that "if there is a nice gui wrapped around the tool, it must be easy". OpenEmbedded is very popular way to build embedded Linux products, and has recently been endorsed as the technology base of MontaVista's Linux 6 product, and is generally considered "hard to use" by new users. While WinCE build tools look simpler on the surface (the 10% above water), you still have the problem of what happens when I need to customize something, implement complex features such as software updates, etc. To build a production system with production grade features, you still need someone on your team who understands the OS and can work at the detail level of both the operating system, and the build system. With either WinCE or Embedded Linux, this generally means companies either need to have experienced developers in house, or hire experts to do portions of the system software development. System software development is not the same as application development, and is generally not something you want to take on with no experience unless you have a lot of time. It is quite common for companies to hire expert help for the first couple projects, and then do follow-on projects in-house. Another feature to consider is parallel build support. With quad core workstations becoming the standard, is it a big deal that a full build can be done in 1.2 hours versus 8? How flexible is the build system at pulling and building source code from various sources such as diverse revision control systems, etc.
Embedded processors are becoming increasingly complex. It is no longer good enough to just have the cpu running. If you consider the OMAP3 cpu family from TI, then you have to ask the following questions: are there libraries available for the 3D acceleration engine, and can I even get them without being committing to millions of units per year? Is there support for the DSP bridge? What is the cost of all this? On a recent project I was involved in, a basic WinCE BSP for the Atmel AT91SAM9260 cost $7000. In terms of developer time, this is not much, but you have to also consider the on-going costs of maintenance, upgrading to new versions of the operating system, etc.
APPLICATION DEVELOPMENT
Both Embedded Linux and WinCE support a range of application libraries and programming languages. C and C++ are well supported. Most business type applications are moving to C# in the WinCE world. Linux has Mono, which provides extensive support for .NET technologies and runs very well in embedded Linux systems. There are numerous Java development environments available for Embedded Linux. One area where you do run into differences is graphics libraries. Generally the Microsoft graphical APIs are not well supported on Linux, so if you have a large application team that are die-hard windows GUI programmers, then perhaps WinCE makes sense. However, there are many options for GUI toolkits that run on both Windows PCs and Embedded Linux devices. Some examples include GTK+, Qt, wxWidgets, etc. The Gimp is an example of a GTK+ application that runs on windows, plus there are many others. The are C# bindings to GTK+ and Qt. Another feature that seems to be coming on strong in the WinCE space is the Windows Communication Foundation (WCF). But again, there are projects to bring WCF to Mono, depending what portions you need. Embedded Linux support for scripting languages like Python is very good, and Python runs very well on 200MHz ARM processors.
There is often the perception that WinCE is realtime, and Linux is not. Linux realtime support is decent in the stock kernels with the PREEMPT option, and real-time support is excellent with the addition of a relatively small real-time patch. You can easily attain sub millisecond timing with Linux. This is something that has changed in the past couple years with the merging of real-time functionality into the stock kernel.
DEVELOPMENT FLOW
In a productive environment, most advanced embedded applications are developed and debugged on a PC, not the target hardware. Even in setups where remote debugging on a target system works well, debugging an application on workstation works better. So the fact that one solution has nice on-target debugging, where the other does not is not really relevant. For data centric systems, it is common to have simulation modes where the application can be tested without connection to real I/O. With both Linux and WinCE applications, application programing for an embedded device is similar to programming for a PC. Embedded Linux takes this a step further. Because embedded Linux technology is the same as desktop, and server Linux technology, almost everything developed for desktop/server (including system software) is available for embedded for free. This means very complete driver support (see USB cell modem and printer examples above), robust file system support, memory management, etc. The breadth of options for Linux is astounding, but some may consider this a negative point, and would prefer a more integrated solution like Windows CE where everything comes from one place. There is a loss of flexibility, but in some cases, the tradeoff might be worth it. For an example of the number of packages that can be build for Embedded Linux systems using Openembedded, see.
GUI TRENDS
It is important to consider trends for embedded devices with small displays being driven by Cell Phones (iPhone, Palm Pre, etc). Standard GUI widgets that are common in desktop systems (dialog boxes, check boxes, pull down lists, etc) do not cut it for modern embedded systems. So, it will be important to consider support for 3D effects, and widget libraries designed to be used by touch screen devices. The Clutter library is an example of this type of support.
REMOTE SUPPORT
Going back to the issue of debugging tools, most people stop at the scenario where the device is setting next to a workstation in the lab. But what about when you need to troubleshoot a device that is being beta-tested half-way around the world? That is where a command-line debugger like Gdb is an advantage, and not a disadvantage. And how do you connect to the device if you don't have support for cell modems in New Zealand, or an efficient connection mechanism like ssh for shell access and transferring files?
SUMMARY
Selecting any advanced technology is not a simple task, and is fairly difficult to do even with experience. So it is important to be asking the right questions, and looking at the decision from many angles. Hopefully this article can help in that.
I have worked in projects that involved customizing the software of an OEM board and I wouldn't say that Linux is cheaper. When buying a board you also need to buy the SDK. You still need to pay even for the Linux version. Some manufacturers offer both Windows CE and Linux solutions for their boards and there isn't a price difference. For Windows CE you also need the Platform Builder and pay for the licenses, but it is easier to go without support.
Another important issue is if you are building a User Interface or a headless device. For devices that require an LCD screen and human interaction is much easier to go with Windows CE. If on the other hand you are building a headless device, Linux may be a sounder option - especially if network protocols are involved. I believe that Linux implementations are more reliable and easier to tweak.
With Linux you are never on you own and you are never dependent on one single entity to provide permissions. There are many support options and you have the freedom to choose your support options for any part of the system through many competing sources.
With Windows CE you must adhere to the license and restrictions as set forth in the complex license agreements that must be agreed to. Get a lawyer. With windows CE you have only one proprietary source for OS support and you will proceed only as they see fit to support and provide what you need. You may not agree with their position, but will not have any recourse but to bend to what they prescribe. The costs of incremental components, modules, development kits, licensing, and support tend to pile up with proprietary platforms. In the longer term, what happens when the vendor no longer desires to support the platform and you do not have the rights to support and distribute it yourself? What happens when the vendor moves to newer technology and wants you to move along with them even though you may not be ready to make the move? $$$
Our experience with Windows solutions in general is that they tend to become more expensive over time. What was originally considered lowest TCO gravitates quickly towards and solution that is encumbered and costly to maintain and support. Licenses have to be re-negotiated over time and the new technologies, often unneeded, are forced into the picture at the whim of the provider for the sake of THEIR business needs. On top of that, the license agreements are CONTINUALLY changing--get a lawyer.
With Linux you have the freedom to provide in-house support and expertise without being encumbered against distributing the solution as you need. You also have the freedom to continue to use and support technology that original providers no longer want to support. Having the source code and the RIGHTs to do with it what you want (GPL, LGPL) is a powerful attractor when it comes to business continuity and containing costs while providing access to the very latest technologies or technologies that fit your needs.
I have developed network drivers that work both on RT Linux (to be more specific, Linux preemptive kernel with RT patch) and Windows CE. My experience was windows CE was more stable in terms of real-time response. Frame timings also showed that windows CE had less jitter.
On RT Linux, we had all sorts of problems. For example, when user moved the mouse; our frames were being delayed. Guess what, certain variants of x-windows disable interrupts. You may also feel that you are safer on console screen only. If you have VGA frame buffers enabled, you are doomed again. We had only one problem with windows CE in terms of jitter again. The problem happened when the USB controller was set to an incorrect mode in the BIOS and windows CE was using lots of time for polling.
To be honest, windows CE had more support. On Linux, you are on your own. You have to read every possible mailing list to understand what problems you may hve.
a partially customised OS
Is much easier to achieve if the OS is open source (and you have the expertise).
Android is a good option for some embedded systems.(it's linux based)
You have many experts that are able to develop on this system.
You have access to many libraries in java or C.
but it uses lot of memory and energy.
What we often forget with paid / licenced software is that you have to deal with licenses. It takes time and energy! Then you have to track if you pay it correctly. It involves many different people with different skills and it costs in decision.
This cost is often not included in the studies that show that open-source/free is more expensive than paid software.
With "free software" it's way easier to deal with licenses and you spend less time on dealing with these issues. Personally I prefer to avoid unnecessary communications with your legal / financing team every time you change some pieces of the software.