I'm trying to add the execution of a shell script on server startup. I do it using cron, so I configured it with 'crontab -e' command. It looks so:
#reboot /home/user/run.sh
Then I enabled service with
sudo systemctl enable cron.service
But when I reboot my server, jobs are not started. I check service status with:
sudo systemctl status cron.service
screenshot with an example
And there is a message that it's 2h 55min left to start executing all jobs. So, as I understood service is running but with 3 hours delay. It's happening after every server startup.
Using sudo systemctl restart cron.service command helps to make service working, but the server skips #reboot jobs because "it's not system startup".
I tried to create a static IP address using the mobile hotspot by making changes in the file shown below enter image description hereand later I removed the static IP by commenting out the changes after which, I get two cross marks near the WLAN network and it says no APs found and WLAN0 not associated. I tried rebooting the OS many times still the same please somebody help me
Please check if this helps:
sudo systemctl daemon-reload
sudo systemctl start dhcpcd.service
# or if dhcpcd is already running:
sudo systemctl restart dhcpcd.service
From: https://raspberrypi.stackexchange.com/a/70609
I'm trying to enable serial-getty#ttyS0.service to output getty to serial console as well as tty0.
I have tried running systemctl enable serial-getty#ttyS0 but I suspect that systemd might not be running when late_command is running.
Then I tried making the symlink manually with ln -s /lib/systemd/system/serial-getty#.service /etc/systemd/system/getty.target.wants/serial-getty#ttyS0.service and after the install getty.target.wants only contains getty#tty1.service.
I can't use console=tty0 console=ttyS0,115200n8 kernel parameter because then messages from the init system and the system logger will only appear on the first serial port and I want them to appear on tty0.
Does anyone have any experience or any idea on how to enable services in preseed config?
Thanks.
I have created one activemq service by using following steps in linux.
# ln –s /home/STI/SIServer/apache-activemq-5.6.0/bin/linux-x86-64/activemq \
/etc/init.d/activemq
# chkconfig –add activemq
Started activemq service by following command:
# chkconfig activemq on
But i need to reboot system to make activemq working.
Also, by stopping service using #chkconfig activemq off , service is not stopping.
I need to forcefully kill pid of activemq.
Please provide inputs , how i can resolve this issue.
Thanks in advance
chkconfig only controls which run levels a service will run at, it doesn't start the service. Use service activemq start to start it and service activemq stop to stop.
Is there a brief guide to explain how to start up a application when the instance starts up and running? If it were one of the services installed through yum then I guess I can use /sbin/chkconfig to add it to the service. (To make it sure, is it correct?)
However, I just want to run the program which was not installed through yum. To run node.js program, I will have to run script sudo node app.js at home directory whenever the system boots up.
I am not used to Amazon Linux AMI so I am having little trouble finding a 'right' way to run some script automatically on every boot.
Is there an elegant way to do this?
One way is to create an upstart job. That way your app will start once Linux loads, will restart automatically if it crashes, and you can start / stop / restart it by sudo start yourapp / sudo stop yourapp / sudo restart yourapp.
Here are beginning steps:
1) Install upstart utility (may be pre-installed if you use a standard Amazon Linux AMI):
sudo yum install upstart
For Ubuntu:
sudo apt-get install upstart
2) Create upstart script for your node app:
in /etc/init add file yourappname.conf with the following lines of code:
#!upstart
description "your app name"
start on started mountall
stop on shutdown
# Automatically Respawn:
respawn
respawn limit 99 5
env NODE_ENV=development
# Warning: this runs node as root user, which is a security risk
# in many scenarios, but upstart-ing a process as a non-root user
# is outside the scope of this question
exec node /path_to_your_app/app.js >> /var/log/yourappname.log 2>&1
3) start your app by sudo start yourappname
You can use forever-service for provisioning node script as a service and automatically starting during boots. Following commands will do the needful,
npm install -g forever-service
forever-service install test
This will provision app.js in the current directory as a service via forever. The service will automatically restart every time system is restarted. Also when stopped it will attempt a graceful stop. This script provisions the logrotate script as well.
Github url: https://github.com/zapty/forever-service
As of now forever-service supports Amazon Linux, CentOS, Redhat support for other Linux distro, Mac and Windows are in works..
NOTE: I am the author of forever-service.
Quick solution for you would be to start your app from /etc/rc.local ; just add your command there.
But if you want to go the elegant way, you'll have to package your application in a rpm file,
have a startup script that goes in /etc/rc.d so that you can use chkconfig on your app, then install the rpm on your instance.
Maybe this or this help. (or just google for "creating rpm packages")
My Amazon Linux instance runs on Ubuntu, and I used systemd to set it up.
First you need to create a <servicename>.service file. (in my case cloudyleela.service)
sudo nano /lib/systemd/system/cloudyleela.service
Type the following in this file:
[Unit]
Description=cloudy leela
Documentation=http://documentation.domain.com
After=network.target
[Service]
Type=simple
TimeoutSec=0
User=ubuntu
ExecStart=/usr/bin/node /home/ubuntu/server.js
Restart=on-failure
[Install]
WantedBy=multi-user.target
In this application the node application is started. You will need a full path here. I configured that the application should simply restart if something goes wrong. The instances that Amazon uses have no passwords for their users by default.
Reload the file from disk, and then you can start your service. You need to enable it to make it active as a service, which automatically launches at startup.
ubuntu#ip-172-31-21-195:~$ sudo systemctl daemon-reload
ubuntu#ip-172-31-21-195:~$ sudo systemctl start cloudyleela
ubuntu#ip-172-31-21-195:~$ sudo systemctl enable cloudyleela
Created symlink /etc/systemd/system/multi-user.target.wants/cloudyleela.service → /lib/systemd/system/cloudyleela.service.
ubuntu#ip-172-31-21-195:~$
A great systemd for node.js tutorial is available here.
If you run a webserver:
You probably will have some issues running your webserver on port 80. And the easiest solution, is actually to run your webserver on a different port (e.g. 4200) and then to redirect that port to port 80. You can accomplish this with the following command:
sudo iptables -t nat -A PREROUTING -i -p tcp --dport 80 -j REDIRECT --to-port 4200
Unfortunately, this is not persistent, so you have to repeat it whenever your server restarts. A better approach is to also include this command in our service script:
ExecStartPre to add the port forwarding
ExecStopPost to remove the port forwarding
PermissionStartOnly to do this with sudo power
So, something like this:
[Service]
...
PermissionsStartOnly=true
ExecStartPre=/sbin/iptables -t nat -A PREROUTING -p tcp --dport 80 -j REDIRECT --to-port 4200
ExecStopPost=/sbin/iptables -t nat -D PREROUTING -p tcp --dport 80 -j REDIRECT --to-port 4200
Don't forget to reload and restart your service:
[ec2-user#ip-172-31-39-212 system]$ sudo systemctl daemon-reload
[ec2-user#ip-172-31-39-212 system]$ sudo systemctl stop cloudyleela
[ec2-user#ip-172-31-39-212 system]$ sudo systemctl start cloudyleela
[ec2-user#ip-172-31-39-212 system]$
For microservices (update on Dec 2020)
The previously mentioned solution gives a lot of flexibility, but it does take some time to set it up. And for each additional application, you need to go through this entire process again. By the time you'll be installing your 5th node application, you'll certainly start wondering: "there has to be a shortcut".
The advantage of PM2 is that it's just 1 service to install. Next it's PM2 which manages the actual applications.
Even the initial setup of PM2 is easy, because it automatically installs the pm2 service for you.
npm install pm2 -g
And adding new services is even easier:
pm2 start index.js --name "foo"`.
When everything's up and running, you can save your setup, to have it automatically start on reboot.
pm2 save
If you want an overview of all your running node applications,
you can run pm2 list
And PM2 also offers an online (webbased) dashboard to monitor your application remotely. You may need a license to access some of the dashboard functionality though (which is a bit over-priced imho).
You can create a script that can start and stop your app and place it in /etc/init.d; make the script adhere to chkconfig's conventions (below), and then use chkconfig to set it to start when other services are started.
You can pick an existing script from /etc/init.d to use as an example; this article describes the requirements, which are basically:
An executable script that identifies the shell needed (i.e., #!/bin/bash)
A comment of the form # chkconfig: where is often 345, startprio indicates where in the order of services to start, and stopprio is where in the order of services to stop. I generally pick a similar service that already exists and use that as a guide for these values (i.e., if you have a web-related service, start at the same levels as httpd, with similar start and stop priorities).
Once your script is set up, you can use
chkconfig --add yourscript
chkconfig yourscript on
and you should be good to go. (Some distros may require you to manually symlink to the script to /etc/init.d/rc.d, but I believe your AWS distro will do that for you when you enable the script.
Use Elastic Beanstalk :) Provides support for auto-scaling, SSL termination, blue/green deployments, etc
If you want the salty sysadmin way for a RedHat based linux distro (Amazon Linux is a flavor of RedHat), learn systemd, as mentioned by #bvdb in the answer above:
https://en.wikipedia.org/wiki/Systemd
Set everything up as described on an EC2 instance, snapshot a custom AMI, and use this custom AMI as your base for EC2 instances hosting your apps. This way you don't have to go through all that setup multiple times. You'll probably want to get acquainted with load balancers too, if you are running in a production environment with uptime requirements.
Or, yes, as mentioned by #bvdb, you could also use pm2 to interface with systemd. Though I don't think pm2 helps with running your app across multiple EC2 instances, which is definitely recommended for production environments with uptime requirements.
All of which is a very steep learning curve. Since the OP seemed to be new to all this, Elastic Beanstalk, Google App Engine, and others are a great way to get code running in the cloud without all that.
These days I dev in TypeScript, deploying to serverless function execution in the cloud for most things, and don't have to think about package installs or app startup at all.
You can use screen. Run crontab -e and add this line:
#reboot screen -d -m bash -c "cd /home/user/yourapp/; node app"
Have been using forever on AWS and it does a good job. Install using
[sudo] npm install forever -g
To add an application use
forever start path_to_application
and to stop the application use
forever stop path_to_application
This is a useful article that helped me with setting it up.