We have an application that is written in 8.0.3 and we are using a frameset. When the user opens the database, the frameset doesn't display all of the time. In the database setting, we have it set to open the frameset. Can anyone tell me why it isn't always displaying?
Usually this happens because it cannot find or load the contents of one or more frames.
Maybe the user has no rights to open an element from the frameset.
Some design elements may have access protection.
See Notes/Domino 6 and 7 Forum for the same issue answered.
This happens when one of the frame contents cannot be found.
Open the properties of each Frame within the Frameset and examine the Value. You may need to click the # button to view the View reference, make sure that the element linked to actually exists.
Related
I created XPages dialog box which shows users view in domino directory. The dialog box can pick up a user and save the user ID.
However in some causes I'd like to pick up some of peoples in the dialog. When I move to another page by pager, the selected check box are cleared.
I found the similar question but this is very old. Now is there good way?
Select All checkbox lotus xpages
I know this is feasible by repeat control but in the current case there are many data(about 10000 users) and want to use 'search'. I'd like to use view control if possible.
The viewPanelHelper code snippet from Sven Hasselbach adds the option to keep selections when paging.
I'm new to Domino Designer. I'm trying to modify an existing application which is running on a remote server. I create a blank xPage and view in browser and it works. I add a label and view in browser and it works. I add a combo box and setup a data source for my xPage. The data source is in the current application and I'm using a view. I setup my combo to point to that data source and specify BindTo value. I view it in browser and I get Error 500 "HTTP Web Server: Command Not Handled Exception" I can open the view that I've used and see all the data in the view. I can even add, edit, and delete from the view.
Ideas... Thnxs in advance.
Additional Info. I've added a "View" from "Container Controls" and used the same data source and the same view and it also works in the browser.
The error being printed is:
javax.faces.el.PropertyNotFoundException: Error getting property 'CompanyName' from bean of type lotus.domino.local.View
com.sun.faces.el.PropertyResolverImpl.getValue(PropertyResolverImpl.java:119)
com.ibm.xsp.el.PropertyResolverImpl.getValue(PropertyResolverImpl.java:144)
com.sun.faces.el.impl.ArraySuffix.evaluate(ArraySuffix.java:182)
com.sun.faces.el.impl.ComplexValue.evaluate(ComplexValue.java:163)
com.sun.faces.el.impl.ExpressionEvaluatorImpl.evaluate(ExpressionEvaluatorImpl.java:257)
com.sun.faces.el.ValueBindingImpl.getValue(ValueBindingImpl.java:150) ....
This was already answered in the comments, but I want to write a better answer.
The problem in this case is that a view data source is being used for editing a document. Directly, this is not a possibility, though there are a few great ways to get around this. The first way, and my favorite, is to use an inline form. I think the Extension Library Demo database offers a few great examples of how to go about doing this. One way is to use a tooltip dialog. Another way is an inline form. A repeater is used and for every row in the view, a hidden panel can be made which contains the document data source and all field which are required to be changeable. By clicking on a button or link, the panel is made visible. This is my favorite variant because it is simple, quick, and generally looks great.
Another way to go about this is to have a view data source only, but use scripts to retrieve the document and set the values in the background and then save and release. It all depends on what you are trying to achieve.
My main recommendation is to look at the ExtLib demo and take a look at what they are doing there.
There is an outline which contains many view displayed. The oultine is contained by a frame from a main frameset.
The users are complaining the fact that when they open the Lotus Client ( IBM Notes 9 ) and then open a Notes application, this outline is not displayed, in fact they see all the views like in the Designer.
If they close and (re)open the application the issue is gone, but still the issue appears again and again.
Thanks for your time.
This is most probably because you do not use the default frame- names in your frameset. Name them NotesView (for the view) and NotesNavigator for the outline, then this will most probably fix your issue.
This is a rather strange one I think, and I'm sure I made a mistake here myself:
in one of my applications I'm showing a fileDownload control bound to a Richtext field in my underlying NotesDocument. The control's properties a are set to Hide if no attachments, show size, type and created as well as allow delete. The control itself sits inside a custom control, being part of another custom control, similar to this:
Xpage.xsp
- ccContainer
- - ccInnerDoc
Document datasources for both the container and the "inner" doc are defined at the root of ccContainer and passed into the inner doc.
The inner doc's datasource is comnputed based on a document selection, and it's igenoreRequestParams property is set to false so that I can display the contents of the selected datasource in a given panel etc.
The selected doc is first opened in read mode, and I can set it to edit mode using a button.
Problem now is that my file download control always is showing the delete icon (trashcan) no matter which mode the doc is opened in. And it's not only the icon showing, it also pretends to work by asking me whether I really want to delete and then really removes the file attachment. Only that this change of course cannot be stored into the datasource because it's only open in read mode.
I'm sure that this behaviour is some side-effect of something else in my application (to a certain extent I rebuilt this in a plain new db and until now cannot reproduce it), but I'm at the end of my knowledge of what this could be.
Any hint of what could be causing this is more than welcome.
In place of #Frantisek Kossuth I answer this myself: see compute dynamically the allowDelete property of file download xpages
Thanks again, Frantisek!
I have a problem that have me stumped.
I have been searching for a solution, but haven't found a working one yet. The solutions I seen introduces other issues.
Here is the scenario:
I have a frameset with two frames: 'Navigator' and 'Main'.
In the 'Navigator' frame I display a form called 'Navigator'. It contains an outline, to display a menu.
In the 'Main' frame I display the view selected by the user in the navigator.
So this is a very traditional Notes client application.
I now want to add a checkbox at the top of the view (in the action bar), allowing the user to filter the view by his/her own name. I use #SetViewInfo for this, and it all works perfect.
The issue is when the user switch views. The #SetViewInfo filter stays active when switching to a different view, so after some searching I found some solutions:
In http://www-01.ibm.com/support/docview.wss?uid=swg21204481 IBM suggests to put the following code in the QuerySave event:
#SetViewInfo([SetViewFilter]; temp ; 0 ;1)
When I am switching view or closing the view, I get the error message "Cannot execute the specified command".
In http://www-10.lotus.com/ldd/bpmpblog.nsf/dx/using-setviewinfo-in-a-notes-client-application-to-create-a-user-specific-view Andre Guirard suggests to put the following code in the QuerySave event:
#SetTargetFrame("frameName");
#UpdateFormulaContext;
#Command([OpenView]; #Subset(#ViewTitle; -1));
#SetViewInfo([SetViewFilter]; ""; "columnName"; 1)
I modify this to match my frame name and the programatic name of the first column in my view:
#SetTargetFrame("Main");
#UpdateFormulaContext;
#Command([OpenView]; #Subset(#ViewTitle; -1));
#SetViewInfo([SetViewFilter]; ""; "Adjuster"; 1)
This works perfectly when switching between view. But when I close the application while I am in this particular filtered view, the application is re-opened automatically. This happens no matter if the filter is enabled or not when closing the view.
However, when the view repopens, the frameset is not reloaded, it is just the view with the built-in view navigator to the left.
I finally got this to work by (in the built-in view navigator) selecting another view that the one where I filter data. This fixed the issue for a while, but then it starts again, and the filtered view is active in the navigator.
Obviously it is the OpenView command that is causing this, but if I remove just that line, I get the "Cannot execute the specified command" error again.
Any suggestions/pointers? I am using Notes 8.5.3 running on Windows 7 Professional.
This question can also be found in the IBM developerWorks forum for Notes 8.5:
http://www-10.lotus.com/ldd/nd85forum.nsf/DateAllThreadedWeb/08c73910571306c485257b2b0061ef91
First thing, I would suggest to make sure your view frame is always called "NotesView". You will have much less compatibility issues if you do this.
Secondly, I presume when you say you put it in the QuerySave event you really mean the QueryClose event? Views do not have a QuerySave event.
Thirdly, I find the #UpdateFormulaContext line is not needed. This is what I have in my view QueryClose...
#SetTargetFrame("NotesView");
#Command([OpenView]; #Subset(#ViewTitle; -1));
#SetViewInfo([SetViewFilter]; ""; "<programmaticColumnName>"; 1)
And I can close the app while in the view without any problems.