I need a script that reads from a flat file and outputs the first string of the row when there is matching string on that row.
For example.
File 'servers.txt' contains:
Server1:12.345.678.99:servertest99.test.com
Server2:12.345.678.98:servertest98.test.com
Server3:12.345.678.97:servertest97.test.com
Commands:
# ./script.sh -i 12.345.678.99
# Server1
#./script.sh -h servertest98.test.com
# Server2
I'm stuck... Thanks!
Using awk, you could say:
awk -F: '$2~/pattern_to_match/{print $1}' filename
For example, saying
awk -F: '$2~/12.345.678.99/{print $1}' inputfile
would result in
Server1
Using sed, you could say:
sed -nr '/pattern/s/(\w+).*/\1/p' inputfile
write a script named script.sh
grep $1 servers.txt| cut -f1 -d":"
run as follows:
chmod +x script.sh
./script.sh pattern
e.g.
./script.sh 12.345.678.99
Related
I am trying to capture the string between 2 specific letters/words using sed/awk. This is what I am trying to do:
The input is a file test.log containing
Owner: CN=abc.samplecerrt.com,o=IN,DC=com
Owner: CN=abc1.samplecerrt.com,o=IN,DC=com
I want to extract only "CN=abc.samplecerrt.com"
I tried
sed 's/.*CN=\(.*\),.*/\1/p' test.log >> result.log
But this returns "abc.samplecerrt.com,o=IN,DC=com"
How do I go about this?
test file:
$ cat logs.txt
CN=abc.samplecerrt.com,o=IN,DC=com Owner: CN=abc1.samplecerrt.com,o=IN,DC=com
command and output:
$ grep -oP 'CN=(?:(?!CN=).)*?.com' logs.txt
CN=abc.samplecerrt.com
CN=abc1.samplecerrt.com
This might work for you (GNU sed):
sed -n 's/.*\(CN=[^,]*\).*/\1/p' file
Or:
sed 's/.*\(CN=[^,]*\).*/\1/p;d' file
The first turns off implicit printing -n so as to act like grep.
Matches and captures the string CN= followed by zero or more non-comma characters and prints the captured group \1 if a match is made.
The second solution is much the same except it deletes all lines and only prints the captured group as above.
With awk you can get the field where is the string you need. For it, you can set FS=:|, Now if you run
awk -v FS=":|," '{print $2}' file
CN=abc.samplecerrt.com
CN=abc1.samplecerrt.com
you get the field. But you only want one, so
awk -v FS=":|," '$2 !~ /abc1/ {print $2}' file
CN=abc.samplecerrt.com
I have a lot of text files and I want to make a bash script in linux to print the name of file in each lines of file. For example I have file lenovo.txt and I want that every line in the file to start with lenovo.txt.
I try to make a "for" for this but didn't work.
for i in *.txt
do
awk '{print '$i' $0}' /var/SambaShare/$i > /var/SambaShare/new_$i
done
Thanks!
It doesn't work because you need to pass $i to awk with the -v option. But you can also use the FILENAME built-in variable in awk :
ls *txt
file.txt file2.txt
cat *txt
A
B
C
A2
B2
C2
for i in *txt; do
awk '{print FILENAME,$0}' $i;
done
file.txt A
file.txt B
file.txt C
file2.txt A2
file2.txt B2
file2.txt C2
An to redirect into a new file :
for i in *txt; do
awk '{print FILENAME,$0}' $i > ${i%.txt}_new.txt;
done
As for your corrected version :
for i in *.txt
do
awk -v i=$i '{print i,$0}' $i > new_$i
done
Hope this helps.
Using grep you can make use of the --with-filename (alias -H) option and use an empty pattern that always matches:
for i in *.txt
do
grep -H "" $i > new_$i
done
Awk and Bash don't share the same variables as they are different languages with separate interpreters. You should pass Bash variables to Awk with the -v option.
You should also quote your file name variables to ensure they don't get expanded as separate arguments if they contain whitespace.
for i in *.txt
do
awk -v i="$i" '{print i,$0}' "$i" > "$i"
done
Suppose I have a file input.txt with few columns and few rows, the first column is the key, and a directory dir with files which contain some of these keys. I want to find all lines in the files in dir which contain these key words. At first I tried to run the command
cat input.txt | awk '{print $1}' | xargs grep dir
This doesn't work because it thinks the keys are paths on my file system. Next I tried something like
cat input.txt | awk '{system("grep -rn dir $1")}'
But this didn't work either, eventually I have to admit that even this doesn't work
cat input.txt | awk '{system("echo $1")}'
After I tried to use \ to escape the white space and the $ sign, I came here to ask for your advice, any ideas?
Of course I can do something like
for x in `cat input.txt` ; do grep -rn $x dir ; done
This is not good enough, because it takes two commands, but I want only one. This also shows why xargs doesn't work, the parameter is not the last argument
You don't need grep with awk, and you don't need cat to open files:
awk 'NR==FNR{keys[$1]; next} {for (key in keys) if ($0 ~ key) {print FILENAME, $0; next} }' input.txt dir/*
Nor do you need xargs, or shell loops or anything else - just one simple awk command does it all.
If input.txt is not a file, then tweak the above to:
real_input_generating_command |
awk 'NR==FNR{keys[$1]; next} {for (key in keys) if ($0 ~ key) {print FILENAME, $0; next} }' - dir/*
All it's doing is creating an array of keys from the first file (or input stream) and then looking for each key from that array in every file in the dir directory.
Try following
awk '{print $1}' input.txt | xargs -n 1 -I pattern grep -rn pattern dir
First thing you should do is research this.
Next ... you don't need to grep inside awk. That's completely redundant. It's like ... stuffing your turkey with .. a turkey.
Awk can process input and do "grep" like things itself, without the need to launch the grep command. But you don't even need to do this. Adapting your first example:
awk '{print $1}' input.txt | xargs -n 1 -I % grep % dir
This uses xargs' -I option to put xargs' input into a different place on the command line it runs. In FreeBSD or OSX, you would use a -J option instead.
But I prefer your for loop idea, converted into a while loop:
while read key junk; do grep -rn "$key" dir ; done < input.txt
Use process substitution to create a keyword "file" that you can pass to grep via the -f option:
grep -f <(awk '{print $1}' input.txt) dir/*
This will search each file in dir for lines containing keywords printed by the awk command. It's equivalent to
awk '{print $1}' input.txt > tmp.txt
grep -f tmp.txt dir/*
grep requires parameters in order: [what to search] [where to search]. You need to merge keys received from awk and pass them to grep using the \| regexp operator.
For example:
arturcz#szczaw:/tmp/s$ cat words.txt
foo
bar
fubar
foobaz
arturcz#szczaw:/tmp/s$ grep 'foo\|baz' words.txt
foo
foobaz
Finally, you will finish with:
grep `commands|to|prepare|a|keywords|list` directory
In case you still want to use grep inside awk, make sure $1, $2 etc are outside quote.
eg. this works perfectly
cat file_having_query | awk '{system("grep " $1 " file_to_be_greped")}'
// notice the space after grep and before file name
In Linux (Cento OS) I have a file that contains a set of additional information that I want to removed. I want to generate a new file with all characters until to the first |.
The file has the following information:
ALFA12345|7890
Beta0-XPTO-2|30452|90 385|29
ZETA2334423 435; 2|2|90dd5|dddd29|dqe3
The output expected will be:
ALFA12345
Beta0 XPTO-2
ZETA2334423 435; 2
That is removed all characters after the character | (inclusive).
Any suggestion for a script that reads File1 and generates File2 with this specific requirement?
Try
cut -d'|' -f1 oldfile > newfile
And, to round out the "big 3", here's the awk version:
awk -F\| '{print $1}' in.dat
You can use a simple sed script.
sed 's/^\([^|]*\).*/\1/g' in.dat
ALFA12345
Beta0-XPTO-2
ZETA2334423 435; 2
Redirect to a file to capture the output.
sed 's/^\([^|]*\).*/\1/g' in.dat > out.dat
And with grep:
$ grep -o '^[^|]*' file1
ALFA12345
Beta0-XPTO-2
ZETA2334423 435; 2
$ grep -o '^[^|]*' file1 > file2
I have a number of log files in a directory. I am trying to write a script to search all the log files for a string and echo the name of the files and the line number that the string is found.
I figure I will probably have to use 2 grep's - piping the output of one into the other since the -l option only returns the name of the file and nothing about the line numbers. Any insight in how I can successfully achieve this would be much appreciated.
Many thanks,
Alex
$ grep -Hn root /etc/passwd
/etc/passwd:1:root:x:0:0:root:/root:/bin/bash
combining -H and -n does what you expect.
If you want to echo the required informations without the string :
$ grep -Hn root /etc/passwd | cut -d: -f1,2
/etc/passwd:1
or with awk :
$ awk -F: '/root/{print "file=" ARGV[1] "\nline=" NR}' /etc/passwd
file=/etc/passwd
line=1
if you want to create shell variables :
$ awk -F: '/root/{print "file=" ARGV[1] "\nline=" NR}' /etc/passwd | bash
$ echo $line
1
$ echo $file
/etc/passwd
Use -H. If you are using a grep that does not have -H, specify two filenames. For example:
grep -n pattern file /dev/null
My version of grep kept returning text from the matching line, which I wasn't sure if you were after... You can also pipe the output to an awk command to have it ONLY print the file name and line number
grep -Hn "text" . | awk -F: '{print $1 ":" $2}'