In Linux (Cento OS) I have a file that contains a set of additional information that I want to removed. I want to generate a new file with all characters until to the first |.
The file has the following information:
ALFA12345|7890
Beta0-XPTO-2|30452|90 385|29
ZETA2334423 435; 2|2|90dd5|dddd29|dqe3
The output expected will be:
ALFA12345
Beta0 XPTO-2
ZETA2334423 435; 2
That is removed all characters after the character | (inclusive).
Any suggestion for a script that reads File1 and generates File2 with this specific requirement?
Try
cut -d'|' -f1 oldfile > newfile
And, to round out the "big 3", here's the awk version:
awk -F\| '{print $1}' in.dat
You can use a simple sed script.
sed 's/^\([^|]*\).*/\1/g' in.dat
ALFA12345
Beta0-XPTO-2
ZETA2334423 435; 2
Redirect to a file to capture the output.
sed 's/^\([^|]*\).*/\1/g' in.dat > out.dat
And with grep:
$ grep -o '^[^|]*' file1
ALFA12345
Beta0-XPTO-2
ZETA2334423 435; 2
$ grep -o '^[^|]*' file1 > file2
Related
I am trying to change the column names to lowercase in a csv file. I found the code to do that online but I dont know how to replace the old column names(uppercase) with new column names(lowercase) in the original file. I did something like this:
$cat head -n1 xxx.csv | tr "[A-Z]" "[a-z]"
But it simply just prints out the column names in lowercase, which is not enough for me.
I tried to add sed -i but it did not do any good. Thanks!!
Using awk (readability winner) :
concise way:
awk 'NR==1{print tolower($0);next}1' file.csv
or using ternary operator:
awk '{print (NR==1) ? tolower($0): $0}' file.csv
or using if/else statements:
awk '{if (NR==1) {print tolower($0)} else {print $0}}' file.csv
To change the file for real:
awk 'NR==1{print tolower($0);next}1' file.csv | tee /tmp/temp
mv /tmp/temp file.csv
For your information, sed using the in place edit switch -i do the same: it use a temporary file under the hood.
You can check this by using :
strace -f -s 800 sed -i'' '...' file
Using perl:
perl -i -pe '$_=lc() if $.==1' file.csv
It replace the file on the fly with -i switch
You can use sed to tell it to replace the first line with all lower-case and then print the rest as-is:
sed '1s/.*/\L&/' ./xxx.csv
Redirect the output or use -i to do an in-place edit.
Proof of Concept
$ echo -e "COL1,COL2,COL3\nFoO,bAr,baZ" | sed '1s/.*/\L&/'
col1,col2,col3
FoO,bAr,baZ
I need to grep some pattern and further i need to print some output within that. Currently I am using the below command which is working fine. But I like to eliminate using multiple pipe and want to use single awk command to achieve the same output. Is there a way to do it using awk?
root#Server1 # cat file
Jenny:Mon,Tue,Wed:Morning
David:Thu,Fri,Sat:Evening
root#Server1 # awk '/Jenny/ {print $0}' file | awk -F ":" '{ print $2 }' | awk -F "," '{ print $1 }'
Mon
I want to get this output using single awk command. Any help?
You can try something like:
awk -F: '/Jenny/ {split($2,a,","); print a[1]}' file
Try this
awk -F'[:,]+' '/Jenny/{print $2}' file.txt
It is using muliple -F value inside the [ ]
The + means one or more since it is treated as a regex.
For this particular job, I find grep to be slightly more robust.
Unless your company has a policy not to hire people named Eve.
(Try it out if you don't understand.)
grep -oP '^[^:]*Jenny[^:]*:\K[^,:]+' file
Or to do a whole-word match:
grep -oP '^[^:]*\bJenny\b[^:]*:\K[^,:]+' file
Or when you are confident that "Jenny" is the full name:
grep -oP '^Jenny:\K[^,:]+' file
Output:
Mon
Explanation:
The stuff up until \K speaks for itself: it selects the line(s) with the desired name.
[^,:]+ captures the day of week (in this case Mon).
\K cuts off everything preceding Mon.
-o cuts off anything following Mon.
I need to print the string between these characters....
atob(' ')
I am using a = in the second part as an attempt to stop the code on an equal signs (which the base64 string I'm trying to get ends in.)
I use this script, but it prints the entire line containing the above characters. I need just the data in between.
sed -n '/atob/,${p;/==/q;}'
I appreciate any help. Thank you.
Does this work (tested for GNU sed 4.2.2)?
sed -n -e "s/atop('\(.*\)')/\1/p" b.txt
where b.txt is
atop('safdasdfasf')
or you can try awk
awk -F\' '/atop/ {print $2}' b.txt
(tested for gnu awk 4.0.2 and added the suggestion by Jotne)
And another working sed:
echo "atop('safdasdfasf')" | sed -r "/atop/ s/^[^']+'([^']+)'.*/\1/"
safdasdfasf
I have a text file like mentioned below, and along with that I will pass an input for which I want a corresponding output.
Input file: test.txt
abc:abc_1
abcd:abcd_1
1_abcd:1_abcd_bkp
xyz:xyz_2
so if I use abc with the above test.txt file, I want abc_1; and if I pass abcd, I need abcd_1 as output.
I tried cat text.txt | grep abc | cut -d":" -f2,2, but I am getting the output
abc_1
abcd_1
1_abcd_bkp
when I want only abc_1.
With GNU grep:
grep -Po "^abc:\K.*" file
Output:
abc_1
\K keeps the text matched so far out of the overall regex match.
You want to use a regular expression with the -e switch.
In particular, regular expressions allow you to use caret (^) to express the start of a line.
Since you only care about abc when it's at the start of a line and it's followed by :, you want:
cat test.txt | grep -e "^abc:" | cut -d":" -f2,2
Output:
abc_1
awk to the rescue!
awk -F: -v key="abc" '$1==key{print $2}'
using : as the delimiter do the look up for key on field 1 to return field 2.
Or, by moving the key in the script
awk -F: '$1=="abc"{print $2}'
you can try the exclude -v:
cat text.txt | grep abc | grep -vi abc[a-z]
not sure if that would work exactly, try something with that kind of idea
Without specifying second field to be printed the whole line will be or in other cases lines.
awk -F: '/abc_/{print $2}' file
abc_1
awk -F: 'NR==1,/abc/{print $2}' file
abc_1
Suppose I have a file input.txt with few columns and few rows, the first column is the key, and a directory dir with files which contain some of these keys. I want to find all lines in the files in dir which contain these key words. At first I tried to run the command
cat input.txt | awk '{print $1}' | xargs grep dir
This doesn't work because it thinks the keys are paths on my file system. Next I tried something like
cat input.txt | awk '{system("grep -rn dir $1")}'
But this didn't work either, eventually I have to admit that even this doesn't work
cat input.txt | awk '{system("echo $1")}'
After I tried to use \ to escape the white space and the $ sign, I came here to ask for your advice, any ideas?
Of course I can do something like
for x in `cat input.txt` ; do grep -rn $x dir ; done
This is not good enough, because it takes two commands, but I want only one. This also shows why xargs doesn't work, the parameter is not the last argument
You don't need grep with awk, and you don't need cat to open files:
awk 'NR==FNR{keys[$1]; next} {for (key in keys) if ($0 ~ key) {print FILENAME, $0; next} }' input.txt dir/*
Nor do you need xargs, or shell loops or anything else - just one simple awk command does it all.
If input.txt is not a file, then tweak the above to:
real_input_generating_command |
awk 'NR==FNR{keys[$1]; next} {for (key in keys) if ($0 ~ key) {print FILENAME, $0; next} }' - dir/*
All it's doing is creating an array of keys from the first file (or input stream) and then looking for each key from that array in every file in the dir directory.
Try following
awk '{print $1}' input.txt | xargs -n 1 -I pattern grep -rn pattern dir
First thing you should do is research this.
Next ... you don't need to grep inside awk. That's completely redundant. It's like ... stuffing your turkey with .. a turkey.
Awk can process input and do "grep" like things itself, without the need to launch the grep command. But you don't even need to do this. Adapting your first example:
awk '{print $1}' input.txt | xargs -n 1 -I % grep % dir
This uses xargs' -I option to put xargs' input into a different place on the command line it runs. In FreeBSD or OSX, you would use a -J option instead.
But I prefer your for loop idea, converted into a while loop:
while read key junk; do grep -rn "$key" dir ; done < input.txt
Use process substitution to create a keyword "file" that you can pass to grep via the -f option:
grep -f <(awk '{print $1}' input.txt) dir/*
This will search each file in dir for lines containing keywords printed by the awk command. It's equivalent to
awk '{print $1}' input.txt > tmp.txt
grep -f tmp.txt dir/*
grep requires parameters in order: [what to search] [where to search]. You need to merge keys received from awk and pass them to grep using the \| regexp operator.
For example:
arturcz#szczaw:/tmp/s$ cat words.txt
foo
bar
fubar
foobaz
arturcz#szczaw:/tmp/s$ grep 'foo\|baz' words.txt
foo
foobaz
Finally, you will finish with:
grep `commands|to|prepare|a|keywords|list` directory
In case you still want to use grep inside awk, make sure $1, $2 etc are outside quote.
eg. this works perfectly
cat file_having_query | awk '{system("grep " $1 " file_to_be_greped")}'
// notice the space after grep and before file name