I'm trying to install UltiSnips in different way but the same message appears each time when I launch vim.
Python 2.7 is installed but it seems that vim has been installed before the 2.7 version.
I tryed to reinstall vim using this link:
$ sudo apt-get install mercurial libssl-dev
$ sudo apt-get build-dep vim
$ hg clone http://hg.debian.org/hg/pkg-vim/vim
$ cd vim
$ hg checkout unstable
$ debian/rules update-orig
$ dpkg-buildpackage -i -I
$ cd ..
But the same problem remains.
Thanks
You don't provide much information to help. You can check whether your Vim has Python via :py print "yes". For the Python version, check the :version output. It will contain something like -lpython2.7.
When you compile Vim yourself, you need to enable the Python integration by passing ./configure --enable-pythoninterp.
I had the same problem with NeoVim on Ubuntu. Running :CheckHealth pointed me into the right direction. Creating the following softlink solved the problem for me:
sudo ln -s /usr/bin/python /usr/local/bin/python
Maybe obvious to most, but not to me was the fact that the neovim module had to be installed. On ubuntu, installing it using pip did the trick for me:
sudo pip3 install neovim
To install the module for python 3, I suppose pip3 has to exchanged for pip for python 2.
Download the source code from http://www.vim.org/.
Then
cd vim
make clean
./configure --prefix=/opt/local --with-features=huge --enable-pythoninterp=yes --enable-multibyte --with-vim-name=vim --with-python-config-dir=/usr/lib/python2.7/config-x86_64-linux-gnu
make
sudo make install
I had the same problem after installing UltiSnips, my simple solution was to type inside vim :version where python3 wasn't install. I solve this installing vim-gtk3, try sudo apt install vim-gtk3 after installing gtk3 the message disapper and my vim launches normally ;)
Related
I need to install python version 3.5.6. What are the requirements to install python 3.5.6.
python 3.6 is already installed on my local machine
What I have tried?
I looked into Python downloads. Downloaded tarball for python3.5.6.
Installed it by using following set of commands
wget https://www.python.org/ftp/python/3.5.6/Python-3.5.6.tar.xz
tar -xf Python-3.5.6.tar.xz
cd Python-3.5.6
sudo apt-get install libbz2-dev libsqlite3-dev build-essential
./configure
make
sudo make install
After installation when I run python3 -V it shows python 3.6.
Expected behaviour
python3 -V command should show python3.5.6
What I am doing wrong?
Try uninstalling it or removing the package all together from your computer. Afterwards try:
$ sudo apt-get install --reinstall python3.5
or you could try:
$ sudo aptitude reinstall python2.7
Best of luck.
python3.5 might show 3.5.6, depending on where and how things are on your PATH.
Either way, instead of manually compiling and installing Python (especially as you're side-stepping your package manager (apt) here which may cause trouble down the line), look into pyenv. After installation, approximately:
$ pyenv install 3.5.6
$ pyenv local 3.5.6
$ python
and you're ready to roll.
I followed installment instructions mentioned here
Its a simple pip install command
After that I went to my linux terminal and wrote in2csvbut got the following error:
/usr/bin/in2csv: No such file or directory
Originally I tried to install it using the command:
sudo apt-get install python3-csvkit
And the in2csv command used to work on terminal, but it appears to work under python 3 installation and I need it under my python2.7.
so I uninstalled the python3-csvkit, and installed it again using pip install, but again its not working from terminal, this way.
Any ideas why, and how to solve it?
in2csv command manual: here
I just had this problem and solved with:
sudo pip install csvkit
Without the sudo pip installs csvkit in /home/username/.local/lib/python2.7/site-packages and probably puts the executable in /home/username/.local/bin. You could avoid the sudo by adding that to your shell PATH.
I want vim-gtk to use vim 7.4 which I installed from source, but gvim is opening with 7.3 itself.
On A fresh linuxmint, after updating system, I removed already existing vim, than installed vim 7.4 from source and it is perfect installation, everything went fine, and than installed ,
sudo apt-get install vim-gtk
than when I enter gvim, gvim is 7.3 not already existing 7.4!!! and if I enter vim from terminal than its vim-7.4.
I will be thankful if anyone helped me to run gvim on vim 7.4
Two thingsā¦
First, $ sudo apt-get install vim-gtk only uses your repositories (which are certainly frozen at 7.3.something), it doesn't care at all about what you installed manually.
Second, GVim is not a separate frontend that you add to an existing Vim: it is Vim, built with GUI support and either launched as gvim or as vim -g.
You could:
uninstall vim-gtk and re-compile Vim manually following these instructions (note the --enable-gui=gtk2)
or find an up-to-date ppa on LaunchPad.net, add it to your software sources and redo $ sudo apt-get install vim-gtk.
just install vim-gnome and vim-gui and reboot.It worked for me.
Maybe this post will help you install gvim 7.4. There are few steps:
Install the needed dependencies:
$ sudo apt-get install ncurses-dev build-essential mercurial
Clone the sources of Vim 7.4:
$ hg clone https://vim.googlecode.com/hg/ vim
Build Vim from sources:
$ cd vim/src
$ make distclean
$ ./configure --with-features=huge --enable-pythoninterp --enable-rubyinterp
$ make
$ sudo make install
Adjust the PATH:
$ export PATH=/usr/local/bin:$PATH
I used this guide and get gvim 7.4.54.
I'm trying to recompile VIM with clipboard support and I'm attempting to follow this guide.
The trouble is that when I do:
sudo apt-get source vim
I get E: Unable to find a source package for vim, although the package name was auto-completed and exists if you type sudo apt-get source <tab><tab>
By the way, before I started, I did sudo apt-get remove vim.
Any ideas how to proceed?
I'm using Ubuntu 12.04 LTS.
Just do
$ sudo apt-get install vim-gnome
It will install both gvim and vim with clipboard support.
I want to install Go. I prepared system for support language. But sadly, I can't find Bison and libc6-dev following this command.
sudo apt-get install bison ed gawk gcc libc6-dev make
Then I still can't find the suitable Mercurial for Ubuntu 8.10, which is followed this command.
apt-get install python-setuptools python-dev build-essential
Therefore everyone please guide what I should do in order to install Go completely. My OS is Ubuntu version 8.10. Notice you can post the direct link for me to get packets/files.
Mercurial can typically be installed with
sudo apt-get install mercurial
The package is in universe, which you may not have enabled. The full guide, if you need it, is available here:
https://help.ubuntu.com/community/Mercurial
After installing setuptools et al., the go installation instructions say that you should install mercurial with easy-install, i.e. sudo easy_install mercurial. Are you having trouble with easy_install?
In order to install go with Homebrew run the following command on the terminal:
$ brew install golang
To check the version of go run the following command:
$ go version
To see the location run:
$ which go
To uninstall go :
$ sudo apt-get remove golang-go