I referred many solutions yet no luck. I have a linux automation which runs few gcloud commands with some conditions. I made this script with node js, but it is incredibly slow that I even finish it manually before the scrips completes the run.
Same with the gcloud commands when I connect to a cluster and kubectl commands when i query something.
Please help!!
It could be a DNS config error on WSL side. I hadthe same issue today, here's how I fixed it !
1. Checking the (deadly slow) response time
[tbg#~] time kubectl get deployments
No resources found in default namespace.
real 0m1.212s
user 0m0.151s
sys 0m0.050s
2. Checking the WSL/DNS configuration
[tbg#~] cat /etc/wsl.conf
[network]
generateResolvConf=false
[tbg#~] cat /etc/resolv.conf
nameserver XX.XXX.XXX.X
nameserver YYY.YY.YY.YY
nameserver 1.1.1.1
If you see that, remove these lines to get back to automatic resolv.conf generation and restart WSL (wsl --shutdown)
3. Checking the (fixed !) response time
[tbg#~] time kubectl get deployments
No resources found in default namespace.
real 0m10.530s
user 0m0.087s
sys 0m0.043s
I found out my resolv.conf configuration was causing that latency, by trying to reinstall kubectl with apt, and finding apt really slow too
Right now access to /mnt folders in WSL2 is too slow and by default at launch the entire Windows PATH is added to the Linux $PATH so any Linux binary that scans $PATH will make things unbearably slow.
To disable this feature, edit the /etc/wsl.conf to add the following section:
[interop]
appendWindowsPath = false
Avoid adding Windows Path to Linux $PATH and best for now is adding folders to the $PATH manually.
Terminate the WSL distro (wsl.exe --terminate <distro_name>) to make it immediately effective or wsl.exe --shutdown and start the terminal again.
Refer to the stack link for more information.
I want to use gitlabs CI/CD to deploy my app on a external server. i have the IP, username and password, and i understand i need to connect through SSH. How can i runn all the nessesary commands on the server side. Server runs on linux.
Currently i just get the code from reposiroty and to the npm build:prod and npm serve:prod for the API and npm start for the UI. How can i do the same chain of cammands with gitlab CI/CD? Or is this even possible? I basically want it to run similarily like jenkins works. But since the code is already on gitlab, it might be simplerer to let gitlab to handle this process instead of installing and setting up jenkins.
To be able to SSH to your machine from within GitLab CI, you probably should setup ssh key authentication, since you can't just type in the password inside the CI.
When you've got that set up, you have to store the private key in an environment variable so you can use it in the CI job. How to do that can be found here.
The last part is actually executing commands over ssh. That can be done in the following way:
ssh <host> '
command1;
command2;
'
I installed and configured Jenkins through the system configuration management (ansible). Through ansible create jobs, install modules and configure them. After installing and configuring the module authorization crowd2, to reload the config via http://localhost/jenkins/reload does not work, as required authorization. To generate an authorization token, you must first log in, but this is not desirable. Can I have root access to reload the config?
P.S. Sorry for my English :)
java -jar jenkins-cli.jar -noCertificateCheck -s https://jenkins.example.com:8443/jenkins/ reload-configuration
You can generate crumb:
curl -u 'admin:password' -X GET http://localhost:8090/crumbIssuer/api/json | jq
Response looks like:
{
"_class": "hudson.security.csrf.DefaultCrumbIssuer",
"crumb": "1348b504383211402ce562e0b46b3691",
"crumbRequestField": "Jenkins-Crumb"
}
Then take crumb field value and use it in reload call:
curl -u 'admin:password' -X POST http://localhost:8090/reload -H 'Jenkins-Crumb: 1348b504383211402ce562e0b46b3691'
One easy workaround is to use Ansible to restart the Tomcat or the Jenkins service (depending on how Jenkins is hosted).
With this solution, the configuration will be reloaded.
If Ansible is used to create a fresh install of Jenkins, nobody will be using Jenkins. So restarting the service can be an acceptable solution ;)
You can use the Jenkins CLI with the reload command. For example:
java -jar jenkins-cli.jar -s https://jenkins.example.com/ reload
Or you could use the create-job to create jobs in the first place, removing the need to reload the configuration.
The CLI lets you authenticate with an SSH key, so that may be more amenable to being run from Ansible.
Try this:
java -jar jenkins-cli.jar -s [JENKINS_URL[ -auth [USER:PASSWORD] reload-configuration
Go to Configurations -> Reload Configuration from Disk
I am new to Jenkins, starting now.
I see the following errors here.
Building in workspace /var/lib/jenkins/workspace/GIF_DECODER
[GIF_DECODER] $ /bin/bash /tmp/hudson3370393570271110742.sh
/tmp/hudson3370393570271110742.sh: line 2: cd: /home/joshis1/Data/E-Drive/Blog/Ready_to_post/Ubuntu/GIF_Decoder_LINUX: Permission denied
/var/lib/jenkins/workspace/GIF_DECODER
I have given the build commands as the following. This is under execute shell.
#!/bin/bash
cd /home/joshis1/Data/E-Drive/Blog/Ready_to_post/Ubuntu/GIF_Decoder_LINUX
pwd
make clean
make everything
I am not understanding what is the issue here? Looks to be a permission year. I have jenkins in sudoers list. I don't why it looks for /var/lib/jenkins/workspace/GIF_Decoder.
I see the jenkins page under - http://:8080/job/GIF_DECODER/configure
How can I setup the hostname so that instead of localhost I have some meaningful name? Please help. Also, what is the best document/video to start with Jenkins for linux users? How to debug Jenkins issue seen? How can I instantiate a build by sending an email?
I am not understanding what is the issue here?
It's a permission error. It looks like your jenkins user does not have permissions for /home/joshis1/Data/E-Drive/Blog/Ready_to_post/Ubuntu/GIF_Decoder_LINUX
How can I setup the hostname so that instead of localhost I have some meaningful name?
Try the hostname of your server in the URL. e.g. http://myserver:8080/job/GIF_DECODER/configure
Also, what is the best document/video to start with Jenkins for linux users?
I expect that you have a basic understanding of how linux works. This is important on how to configure your jenkins and write the necessary build steps. The most basic information you will find on http://jenkins-ci.org and basic installation https://wiki.jenkins-ci.org/display/JENKINS/Installing+Jenkins
How to debug Jenkins issue seen?
That depends ...
... on the issue. If you have build problems check the console output of the job first. In addition, Jenkins writes its logfiles into the jenkins home directory.
How can I instantiate a build by sending an email?
Check out the mail commander plugin
Is there a way to reset all (or just disable the security settings) from the command line without a user/password as I have managed to completely lock myself out of Jenkins?
The simplest solution is to completely disable security - change true to false in /var/lib/jenkins/config.xml file.
<useSecurity>true</useSecurity>
A one-liner to achieve the same:
sed -i 's/<useSecurity>true<\/useSecurity>/<useSecurity>false<\/useSecurity>/g' /var/lib/jenkins/config.xml
Then just restart Jenkins:
sudo service jenkins restart
And then go to admin panel and set everything once again.
If you in case are running your Jenkins inside a Kubernetes pod and can not run service command, then you can just restart Jenkins by deleting the pod:
kubectl delete pod <jenkins-pod-name>
Once the command was issued, Kubernetes will terminate the old pod and start a new one.
One other way would be to manually edit the configuration file for your user (e.g. /var/lib/jenkins/users/username/config.xml) and update the contents of passwordHash:
<passwordHash>#jbcrypt:$2a$10$razd3L1aXndFfBNHO95aj.IVrFydsxkcQCcLmujmFQzll3hcUrY7S</passwordHash>
Once you have done this, just restart Jenkins and log in using this password:
test
The <passwordHash> element in users/<username>/config.xml will accept data of the format
salt:sha256("password{salt}")
So, if your salt is bar and your password is foo then you can produce the SHA256 like this:
echo -n 'foo{bar}' | sha256sum
You should get 7f128793bc057556756f4195fb72cdc5bd8c5a74dee655a6bfb59b4a4c4f4349 as the result. Take the hash and put it with the salt into <passwordHash>:
<passwordHash>bar:7f128793bc057556756f4195fb72cdc5bd8c5a74dee655a6bfb59b4a4c4f4349</passwordHash>
Restart Jenkins, then try logging in with password foo. Then reset your password to something else. (Jenkins uses bcrypt by default, and one round of SHA256 is not a secure way to store passwords. You'll get a bcrypt hash stored when you reset your password.)
I found the file in question located in /var/lib/jenkins called config.xml, modifying that fixed the issue.
In El-Capitan config.xml can not be found at
/var/lib/jenkins/
Its available in
~/.jenkins
then after that as other mentioned open the config.xml file and make the following changes
In this replace <useSecurity>true</useSecurity> with <useSecurity>false</useSecurity>
Remove <authorizationStrategy> and <securityRealm>
Save it and restart the jenkins(sudo service jenkins restart)
The answer on modifying was correct. Yet, I think it should be mentioned that /var/lib/jenkins/config.xml looks something like this if you have activated "Project-based Matrix Authorization Strategy". Deleting /var/lib/jenkins/config.xml and restarting jenkins also does the trick. I also deleted the users in /var/lib/jenkins/users to start from scratch.
<authorizationStrategy class="hudson.security.ProjectMatrixAuthorizationStrategy">
<permission>hudson.model.Computer.Configure:jenkins-admin</permission>
<permission>hudson.model.Computer.Connect:jenkins-admin</permission>
<permission>hudson.model.Computer.Create:jenkins-admin</permission>
<permission>hudson.model.Computer.Delete:jenkins-admin</permission>
<permission>hudson.model.Computer.Disconnect:jenkins-admin</permission>
<!-- if this is missing for your user and it is the only one, bad luck -->
<permission>hudson.model.Hudson.Administer:jenkins-admin</permission>
<permission>hudson.model.Hudson.Read:jenkins-admin</permission>
<permission>hudson.model.Hudson.RunScripts:jenkins-admin</permission>
<permission>hudson.model.Item.Build:jenkins-admin</permission>
<permission>hudson.model.Item.Cancel:jenkins-admin</permission>
<permission>hudson.model.Item.Configure:jenkins-admin</permission>
<permission>hudson.model.Item.Create:jenkins-admin</permission>
<permission>hudson.model.Item.Delete:jenkins-admin</permission>
<permission>hudson.model.Item.Discover:jenkins-admin</permission>
<permission>hudson.model.Item.Read:jenkins-admin</permission>
<permission>hudson.model.Item.Workspace:jenkins-admin</permission>
<permission>hudson.model.View.Configure:jenkins-admin</permission>
<permission>hudson.model.View.Create:jenkins-admin</permission>
<permission>hudson.model.View.Delete:jenkins-admin</permission>
<permission>hudson.model.View.Read:jenkins-admin</permission>
</authorizationStrategy>
We can reset the password while leaving security on.
The config.xml file in /var/lib/Jenkins/users/admin/ acts sort of like the /etc/shadow file Linux or UNIX-like systems or the SAM file in Windows, in the sense that it stores the hash of the account's password.
If you need to reset the password without logging in, you can edit this file and replace the old hash with a new one generated from bcrypt:
$ pip install bcrypt
$ python
>>> import bcrypt
>>> bcrypt.hashpw("yourpassword", bcrypt.gensalt(rounds=10, prefix=b"2a"))
'YOUR_HASH'
This will output your hash, with prefix 2a, the correct prefix for Jenkins hashes.
Now, edit the config.xml file:
...
<passwordHash>#jbcrypt:REPLACE_THIS</passwordHash>
...
Once you insert the new hash, reset Jenkins:
(if you are on a system with systemd):
sudo systemctl restart Jenkins
You can now log in, and you didn't leave your system open for a second.
To disable Jenkins security in simple steps in Linux, run these commands:
sudo ex +g/useSecurity/d +g/authorizationStrategy/d -scwq /var/lib/jenkins/config.xml
sudo /etc/init.d/jenkins restart
It will remove useSecurity and authorizationStrategy lines from your config.xml root config file and restart your Jenkins.
See also: Disable security at Jenkins website
After gaining the access to Jenkins, you can re-enable security in your Configure Global Security page by choosing the Access Control/Security Realm. After than don't forget to create the admin user.
To reset it without disabling security if you're using matrix permissions (probably easily adaptable to other login methods):
In config.xml, set disableSignup to false.
Restart Jenkins.
Go to the Jenkins web page and sign up with a new user.
In config.xml, duplicate one of the <permission>hudson.model.Hudson.Administer:username</permission> lines and replace username with the new user.
If it's a private server, set disableSignup back to true in config.xml.
Restart Jenkins.
Go to the Jenkins web page and log in as the new user.
Reset the password of the original user.
Log in as the original user.
Optional cleanup:
Delete the new user.
Delete the temporary <permission> line in config.xml.
No securities were harmed during this answer.
On the offchance you accidentally lock yourself out of Jenkins due to a permission mistake, and you dont have server-side access to switch to the jenkins user or root... You can make a job in Jenkins and add this to the Shell Script:
sed -i 's/<useSecurity>true/<useSecurity>false/' ~/config.xml
Then click Build Now and restart Jenkins (or the server if you need to!)
\.jenkins\secrets\initialAdminPassword
Copy the password from the initialAdminPassword file and paste it into the Jenkins.
1 first check location if you install war or Linux or windows based on that
for example if war under Linux and for admin user
/home/"User_NAME"/.jenkins/users/admin/config.xml
go to this tag after #jbcrypt:
<passwordHash>#jbcrypt:$2a$10$3DzCGLQr2oYXtcot4o0rB.wYi5kth6e45tcPpRFsuYqzLZfn1pcWK</passwordHash>
change this password using use any website for bcrypt hash generator
https://www.dailycred.com/article/bcrypt-calculator
make sure it start with $2a cause this one jenkens uses
In order to remove the by default security for jenkins in Windows OS,
You can traverse through the file Config.xml created inside /users/{UserName}/.jenkins.
Inside this file you can change the code from
<useSecurity>true</useSecurity>
To,
<useSecurity>false</useSecurity>
step-1 : go to the directory cd .jenkins/secrets then you will get a 'initialAdminPassword'.
step-2 : nano initialAdminPassword
you will get a password
changing the <useSecurity>true</useSecurity> to <useSecurity>false</useSecurity> will not be enough, you should remove <authorizationStrategy> and <securityRealm> elements too and restart your jenkins server by doing sudo service jenkins restart .
remember this, set <usesecurity> to false only may cause a problem for you, since these instructions are mentioned in thier official documentation here.
Jenkins over KUBENETES and Docker
In case of Jenkins over a container managed by a Kubernetes POD is a bit more complex since: kubectl exec PODID --namespace=jenkins -it -- /bin/bash will you allow to access directly to the container running Jenkins, but you will not have root access, sudo, vi and many commands are not available and therefore a workaround is needed.
Use kubectl describe pod [...] to find the node running your Pod and the container ID (docker://...)
SSH into the node
run docker exec -ti -u root -- /bin/bash to access the container with Root privileges
apt-get update
sudo apt-get install vim
The second difference is that the Jenkins configuration file are placed in a different path that corresponds to the mounting point of the persistent volume, i.e. /var/jenkins_home, this location might change in the future, check it running df.
Then disable security - change true to false in /var/jenkins_home/jenkins/config.xml file.
<useSecurity>false</useSecurity>
Now it is enough to restart the Jenkins, action that will cause the container and the Pod to die, it will created again in some seconds with the configuration updated (and all the chance like vi, update erased) thanks to the persistent volume.
The whole solution has been tested on Google Kubernetes Engine.
UPDATE
Notice that you can as well run ps -aux the password in plain text is shown even without root access.
jenkins#jenkins-87c47bbb8-g87nw:/$ps -aux
[...]
jenkins [..] -jar /usr/share/jenkins/jenkins.war --argumentsRealm.passwd.jenkins=password --argumentsRealm.roles.jenkins=admin
[...]
Easy way out of this is to use the admin psw to login with your admin user:
Change to root user: sudo su -
Copy the password: xclip -sel clip < /var/lib/jenkins/secrets/initialAdminPassword
Login with admin and press ctrl + v on password input box.
Install xclip if you don't have it:
$ sudo apt-get install xclip
Using bcrypt you can solve this issue. Extending the #Reem answer for someone who is trying to automate the process using bash and python.
#!/bin/bash
pip install bcrypt
yum install -y https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm
yum -y install xmlstarlet
cat > /tmp/jenkinsHash.py <<EOF
import bcrypt
import sys
if not sys.argv[1]:
sys.exit(10)
plaintext_pwd=sys.argv[1]
encrypted_pwd=bcrypt.hashpw(sys.argv[1], bcrypt.gensalt(rounds=10, prefix=b"2a"))
isCorrect=bcrypt.checkpw(plaintext_pwd, encrypted_pwd)
if not isCorrect:
sys.exit(20);
print "{}".format(encrypted_pwd)
EOF
chmod +x /tmp/jenkinsHash.py
cd /var/lib/jenkins/users/admin*
pwd
while (( 1 )); do
echo "Waiting for Jenkins to generate admin user's config file ..."
if [[ -f "./config.xml" ]]; then
break
fi
sleep 10
done
echo "Admin config file created"
admin_password=$(python /tmp/jenkinsHash.py password 2>&1)
# Repalcing the new passowrd
xmlstarlet -q ed --inplace -u "/user/properties/hudson.security.HudsonPrivateSecurityRealm_-Details/passwordHash" -v '#jbcrypt:'"$admin_password" config.xml
# Restart
systemctl restart jenkins
sleep 10
I have kept password hardcoded here but it can be a user input depending upon the requirement. Also make sure to add that sleep otherwise any other command revolving around Jenkins will fail.
To very simply disable both security and the startup wizard, use the JAVA property:
-Djenkins.install.runSetupWizard=false
The nice thing about this is that you can use it in a Docker image such that your container will always start up immediately with no login screen:
# Dockerfile
FROM jenkins/jenkins:lts
ENV JAVA_OPTS -Djenkins.install.runSetupWizard=false
Note that, as mentioned by others, the Jenkins config.xml is in /var/jenkins_home in the image, but using sed to modify it from the Dockerfile fails, because (presumably) the config.xml doesn't exist until the server starts.
I will add some improvements based on the solution:
https://stackoverflow.com/a/51255443/5322871
On my scenario it was deployed with Swarm cluster with nfs volume, in order to perform the password reset I did the following:
Attach to the pod:
$ docker exec -it <pod-name> bash
Generate the hash password with python (do not forget to specify the letter b outside of your quoted password, the method hashpw requires a parameter in bytes):
$ pip install bcrypt
$ python
>>> import bcrypt
>>> bcrypt.hashpw(b"yourpassword", bcrypt.gensalt(rounds=10, prefix=b"2a"))
'YOUR_HASH'
Once inside the container find all the config.xml files:
$ find /var/ -type f -iname "config.xml"
Once identified, modify value of the field ( on my case the config.xml was in another location):
$ vim /var/jenkins_home/users/admin_9482805162890262115/config.xml
...
<passwordHash>#jbcrypt:YOUR_HASH</passwordHash>
...
Restart the service:
docker service scale <service-name>=0
docker service scale <service-name>=1
Hope this can be helpful for anybody.
I had a similar issue, and following reply from ArtB,
I found that my user didn't have the proper configurations. so what I did:
Note: manually modifying such XML files is risky. Do it at your own risk. Since I was already locked out, I didn't have much to lose. AFAIK Worst case I would have deleted the ~/.jenkins/config.xml file as prev post mentioned.
**> 1. ssh to the jenkins machine
cd ~/.jenkins (I guess that some installations put it under /var/lib/jenkins/config.xml, but not in my case )
vi config.xml, and under authorizationStrategy xml tag, add the below section (just used my username instead of "put-your-username")
restart jenkins. in my case as root service tomcat7 stop; ; service tomcat7 start
Try to login again. (worked for me)**
under
add:
<permission>hudson.model.Computer.Build:put-your-username</permission>
<permission>hudson.model.Computer.Configure:put-your-username</permission>
<permission>hudson.model.Computer.Connect:put-your-username</permission>
<permission>hudson.model.Computer.Create:put-your-username</permission>
<permission>hudson.model.Computer.Delete:put-your-username</permission>
<permission>hudson.model.Computer.Disconnect:put-your-username</permission>
<permission>hudson.model.Hudson.Administer:put-your-username</permission>
<permission>hudson.model.Hudson.ConfigureUpdateCenter:put-your-username</permission>
<permission>hudson.model.Hudson.Read:put-your-username</permission>
<permission>hudson.model.Hudson.RunScripts:put-your-username</permission>
<permission>hudson.model.Hudson.UploadPlugins:put-your-username</permission>
<permission>hudson.model.Item.Build:put-your-username</permission>
<permission>hudson.model.Item.Cancel:put-your-username</permission>
<permission>hudson.model.Item.Configure:put-your-username</permission>
<permission>hudson.model.Item.Create:put-your-username</permission>
<permission>hudson.model.Item.Delete:put-your-username</permission>
<permission>hudson.model.Item.Discover:put-your-username</permission>
<permission>hudson.model.Item.Read:put-your-username</permission>
<permission>hudson.model.Item.Workspace:put-your-username</permission>
<permission>hudson.model.Run.Delete:put-your-username</permission>
<permission>hudson.model.Run.Update:put-your-username</permission>
<permission>hudson.model.View.Configure:put-your-username</permission>
<permission>hudson.model.View.Create:put-your-username</permission>
<permission>hudson.model.View.Delete:put-your-username</permission>
<permission>hudson.model.View.Read:put-your-username</permission>
<permission>hudson.scm.SCM.Tag:put-your-username</permission>
Now, you can go to different directions. For example I had github oauth integration, so I could have tried to replace the authorizationStrategy with something like below:
Note:, It worked in my case because I had a specific github oauth plugin that was already configured. So it is more risky than the previous solution.
<authorizationStrategy class="org.jenkinsci.plugins.GithubAuthorizationStrategy" plugin="github-oauth#0.14">
<rootACL>
<organizationNameList class="linked-list">
<string></string>
</organizationNameList>
<adminUserNameList class="linked-list">
<string>put-your-username</string>
<string>username2</string>
<string>username3</string>
<string>username_4_etc_put_username_that_will_become_administrator</string>
</adminUserNameList>
<authenticatedUserReadPermission>true</authenticatedUserReadPermission>
<allowGithubWebHookPermission>false</allowGithubWebHookPermission>
<allowCcTrayPermission>false</allowCcTrayPermission>
<allowAnonymousReadPermission>false</allowAnonymousReadPermission>
</rootACL>
</authorizationStrategy>
Edit the file $JENKINS_HOME/config.xml and change de security configuration with this:
<authorizationStrategy class="hudson.security.AuthorizationStrategy$Unsecured"/>
After that restart Jenkins.
A lot of times you wont be having permissions to edit the config.xml file.
The simplest thing would be to take a back of config.xml and delete using sudo command.
Restart the jenkins using the command sudo /etc/init.d/jenkins restart
This will disable all the security in the Jenkins and the login option would disappear
For one who is using macOS, the new version just can be installed by homebrew. so for resting, this command line must be using:
brew services restart jenkins-lts
The directory where the file is located config.xml in windows
C:\Windows\System32\config\systemprofile\AppData\Local\Jenkins\.jenkins