cd = 'cd !* ;set prompt="! $host `dirs` % "'
This alias is on a Red Hat Enterprise linux server I use commonly, and I can't figure out what it does for me. Any ideas?
I think it is meant to change the directory and display the previous directories in the prompt. !* is a bash history expansion meaning the previous command without the first word. E.g. if the previous command was cd project, then !* is project. See the History Expansion section in man bash, more specifically here.
dirs simply displays the stack of directories, and is a bash builtin, see the link for details.
However, in standard bash, you'd use export PS1=... instead of set prompt=, so perhaps the author of the alias meant it to be used in csh rather than bash, e.g. see here. The history expansion !* has the same semantics, e.g. see here for tcsh.
In csh aliasing, !* is the input the command received, e.g.
alias + emacs \!* & and running + somefile will open somefile using emacs and move it to the background.
Now to your line - it changes directory to whatever you give it (!*) and sets the prompt (the line written in your terminal before your writing zone) to the host name, path (as pwd) and %
Just a quick note - pay attention to the \ in my alias line - you must escape special characters in your alias and pay attention to this
I'm trying to set environment variables for non-interactive non-login shell. I know bash reads the contents of ~/.bashrc before execute the command. In the beginning of the script there's a part:
*# If not running interactively, don't do anything
case $- in
*i*) ;;
*) return;;
esac*
So I think if I add something above it, it will take effect no matter if the shell is interactive or not:
export VAR=something
# If not running interactively, don't do anything
case $- in
*i*) ;;
*) return;;
esac
However it doesn't work :(. I want to avoid using $BASH_ENV because it messes up my xkb settings. I remapped some keys in /usr/share/X11/xkb/symbols/pc. And if I set $BASH_ENV, it will just loads the default keymap.
Solution for Ubuntu: set the variables in /etc/environment, and it works for all users and all types of shells.
The details are somewhat platform-dependent. Bash Startup Files in the reference manual describes the default behavior of Bash itself; but you also need to take into account the behavior of your particular platform.
In general, $HOME/.bashrc is executed for non-interactive login shells, but no script can be guaranteed to run for a non-interactive non-login shell. You can force it by setting (and exporting!) BASH_ENV from a parent shell to the name of a script which you want to execute when a non-interactive shell is started.
Sometimes, an acceptable workaround is to run a script in a login shell, and trust that the non-interactive non-login script you run inherits whatever parameters you set in the login shell. This is what e.g. /etc/environment can do; but it does not force a piece of script to run at the time when a noninteractive shell is subsequently started (except of course if you use /etc/environment to set up BASH_ENV as described above).
I want to send little script to remote machine by ssh
the script is
#!/bin/bash
sleep 1
reboot
but I get event not found - because the "!"
ssh 183.34.4.9 "echo -e '#!/bin/bash\nsleep 1\reboot>'/tmp/file"
-bash: !/bin/bash\nsleep: event not found
how to ignore the "!" char so script will so send successfully by ssh?
remark I cant use "\" before the "!" because I get
more /tmp/file
#\!/bin/bash
sleep 1
Use set +H before your command to disable ! style history substitution:
set +H
ssh 183.34.4.9 "echo -e '#!/bin/bash\nsleep 1\reboot>'/tmp/file"
# enable hostory expnsion again
set -H
I think your command line is not well formated. You can send this:
ssh 183.34.4.9 'echo -e "#!/bin/bash\nsleep 1\nreboot">/tmp/file'
When I say "not well formated" I mean you put ">" inside the "echo" and you forgot to add "n" before "reboot", and you put "\reboot", wich will be interpreted as "CR" (carriage return) followed by "eboot" command (which I don't think that exists).
But what did the trick here is to invert the comas changing (') with (") and viceversa.
Bash is running interactively (which means that you are feeding commands to it from the standard input and not exec(2)ing a command from a shell script) so you don't need to include the line #!/bin/bash in that case (even more, bash should just ignore it, but not the included bang, as it is part of the active history mechanism)
But why? the first two characters in an executable file (any file capable of being exec(2)ed from secondary storage, not your case) have a special meaning (for the kernel and for the shell): they are the magic number that identifies the kind of executable file the kernel is loading. This allows the kernel to select the proper executable loading routines depending on the binary executable format (and what allows you for example to execute BSD programs in linux kernels, and viceversa)
A special value for this magic numbers is composed by the two characters # and ! (in that order) that forces the kernel to read the complete first line of that file and load the executable file specified in that line instead, allowing you to execute shell scripts for different interpreters directly from the command line. And it is done on purpose, as the # character is commonly in shell script parlance a comment character. This only happens when the shell that is interpreting the commands is not an interactive shell. When the shell loads a script with those characters, it normally reads the first line also to check if it has the #! mark and load the proper interpreter, by replicating the kernel function that does this. Despite of being a comment for the shell, it does this to allow to treat as executables files that are not stored on secondary storage (the only ones the exec(2) system call can deal with), but coming from stdin (as happens to yours).
As your shell is running interactively and you do want to execute its commands without a shell change, you don't need that line and can completely eliminate it without having to disable the bang character.
Sorry, but the solution given about executing the shell with -H option will probably not be viable, as the shell executing the commands is the login shell in the target machine, so you cannot provide specific parameters to it (parameters are selected by the login(8) program and normally don't include arbitrary parameters like -H).
The best solution is to fully eliminate the #!/bin/bash line, as you are not going to exec(2) that program in the target. In case you want to select the shell from the input line (case the user has a different shell installed as login shell), it is better to invoke the wanted shell in the command line and pass it (through stdin, or making it read the shell script as a file) the shell commands you wan to execute (but again, without the #! line).
NOTE
Its important to ensure you'll execute the whole thing, so it's best to pass all the script contents in the destination target, and once assured you have passed the whole thing to execute it as a whole. Then your #! first line will be properly processed, as the executable will be run by means of an exec(2) made from the kernel.
Example:
DIRECTORY=/bla/bla
FILE=/path/to/file
OUTPUT=/path/to/output
# this is the command we want to pass through the line
cat <<EOF | ssh user#target "cat >>/tmp/shell.sh"
cd $DIRECTORY
foo $FILE >$OUTPUT
exit 0
EOF
# we have copied the script file in a remote /tmp/shell.sh
# and we are sure it has passed correctly, so it's ready
# for local execution there.
# now, execute it.
# the remote shell won't be interactive, and you'll ensure that it is /bin/bash
ssh user#target "/bin/bash /tmp/shell.sh" >remote_shell.out
A more sophisticate system is one that allows to to sign the shell script before sending, and verify the script signature before executing it, so you are protected against possible trojan horse attacks. But this is out of scope on this explanation.
Another alternative is to use the batch(2) command remotely and pass it all the commands you want executed. you'll get a sessionless executing environment, more suitable to the task you are demanding (despite the fact that you'll get the script output by email to the target user running the script)
Interactively, beware that ! triggers history expansion inside double quotes
from here: https://riptutorial.com/bash/example/2465/quoting-literal-text
my recommended solution is to use single quotes to define the string (and either escape single quotes \' or use double quotes " within the string):
ssh 183.34.4.9 'echo -e "#!/bin/bash\nsleep 1\reboot>"/tmp/file'
This question already has answers here:
Can I export a variable to the environment from a Bash script without sourcing it?
(13 answers)
Closed 3 years ago.
The community reviewed whether to reopen this question last year and left it closed:
Original close reason(s) were not resolved
I'm trying to write a shell script that, when run, will set some environment variables that will stay set in the caller's shell.
setenv FOO foo
in csh/tcsh, or
export FOO=foo
in sh/bash only set it during the script's execution.
I already know that
source myscript
will run the commands of the script rather than launching a new shell, and that can result in setting the "caller's" environment.
But here's the rub:
I want this script to be callable from either bash or csh. In other words, I want users of either shell to be able to run my script and have their shell's environment changed. So 'source' won't work for me, since a user running csh can't source a bash script, and a user running bash can't source a csh script.
Is there any reasonable solution that doesn't involve having to write and maintain TWO versions on the script?
Use the "dot space script" calling syntax. For example, here's how to do it using the full path to a script:
. /path/to/set_env_vars.sh
And here's how to do it if you're in the same directory as the script:
. set_env_vars.sh
These execute the script under the current shell instead of loading another one (which is what would happen if you did ./set_env_vars.sh). Because it runs in the same shell, the environmental variables you set will be available when it exits.
This is the same thing as calling source set_env_vars.sh, but it's shorter to type and might work in some places where source doesn't.
Your shell process has a copy of the parent's environment and no access to the parent process's environment whatsoever. When your shell process terminates any changes you've made to its environment are lost. Sourcing a script file is the most commonly used method for configuring a shell environment, you may just want to bite the bullet and maintain one for each of the two flavors of shell.
You're not going to be able to modify the caller's shell because it's in a different process context. When child processes inherit your shell's variables, they're
inheriting copies themselves.
One thing you can do is to write a script that emits the correct commands for tcsh
or sh based how it's invoked. If you're script is "setit" then do:
ln -s setit setit-sh
and
ln -s setit setit-csh
Now either directly or in an alias, you do this from sh
eval `setit-sh`
or this from csh
eval `setit-csh`
setit uses $0 to determine its output style.
This is reminescent of how people use to get the TERM environment variable set.
The advantage here is that setit is just written in whichever shell you like as in:
#!/bin/bash
arg0=$0
arg0=${arg0##*/}
for nv in \
NAME1=VALUE1 \
NAME2=VALUE2
do
if [ x$arg0 = xsetit-sh ]; then
echo 'export '$nv' ;'
elif [ x$arg0 = xsetit-csh ]; then
echo 'setenv '${nv%%=*}' '${nv##*=}' ;'
fi
done
with the symbolic links given above, and the eval of the backquoted expression, this has the desired result.
To simplify invocation for csh, tcsh, or similar shells:
alias dosetit 'eval `setit-csh`'
or for sh, bash, and the like:
alias dosetit='eval `setit-sh`'
One nice thing about this is that you only have to maintain the list in one place.
In theory you could even stick the list in a file and put cat nvpairfilename between "in" and "do".
This is pretty much how login shell terminal settings used to be done: a script would output statments to be executed in the login shell. An alias would generally be used to make invocation simple, as in "tset vt100". As mentioned in another answer, there is also similar functionality in the INN UseNet news server.
In my .bash_profile I have :
# No Proxy
function noproxy
{
/usr/local/sbin/noproxy #turn off proxy server
unset http_proxy HTTP_PROXY https_proxy HTTPs_PROXY
}
# Proxy
function setproxy
{
sh /usr/local/sbin/proxyon #turn on proxy server
http_proxy=http://127.0.0.1:8118/
HTTP_PROXY=$http_proxy
https_proxy=$http_proxy
HTTPS_PROXY=$https_proxy
export http_proxy https_proxy HTTP_PROXY HTTPS_PROXY
}
So when I want to disable the proxy,
the function(s) run in the login shell and sets the variables
as expected and wanted.
It's "kind of" possible through using gdb and setenv(3), although I have a hard time recommending actually doing this. (Additionally, i.e. the most recent ubuntu won't actually let you do this without telling the kernel to be more permissive about ptrace, and the same may go for other distros as well).
$ cat setfoo
#! /bin/bash
gdb /proc/${PPID}/exe ${PPID} <<END >/dev/null
call setenv("foo", "bar", 0)
END
$ echo $foo
$ ./setfoo
$ echo $foo
bar
This works — it isn't what I'd use, but it 'works'. Let's create a script teredo to set the environment variable TEREDO_WORMS:
#!/bin/ksh
export TEREDO_WORMS=ukelele
exec $SHELL -i
It will be interpreted by the Korn shell, exports the environment variable, and then replaces itself with a new interactive shell.
Before running this script, we have SHELL set in the environment to the C shell, and the environment variable TEREDO_WORMS is not set:
% env | grep SHELL
SHELL=/bin/csh
% env | grep TEREDO
%
When the script is run, you are in a new shell, another interactive C shell, but the environment variable is set:
% teredo
% env | grep TEREDO
TEREDO_WORMS=ukelele
%
When you exit from this shell, the original shell takes over:
% exit
% env | grep TEREDO
%
The environment variable is not set in the original shell's environment. If you use exec teredo to run the command, then the original interactive shell is replaced by the Korn shell that sets the environment, and then that in turn is replaced by a new interactive C shell:
% exec teredo
% env | grep TEREDO
TEREDO_WORMS=ukelele
%
If you type exit (or Control-D), then your shell exits, probably logging you out of that window, or taking you back to the previous level of shell from where the experiments started.
The same mechanism works for Bash or Korn shell. You may find that the prompt after the exit commands appears in funny places.
Note the discussion in the comments. This is not a solution I would recommend, but it does achieve the stated purpose of a single script to set the environment that works with all shells (that accept the -i option to make an interactive shell). You could also add "$#" after the option to relay any other arguments, which might then make the shell usable as a general 'set environment and execute command' tool. You might want to omit the -i if there are other arguments, leading to:
#!/bin/ksh
export TEREDO_WORMS=ukelele
exec $SHELL "${#-'-i'}"
The "${#-'-i'}" bit means 'if the argument list contains at least one argument, use the original argument list; otherwise, substitute -i for the non-existent arguments'.
You should use modules, see http://modules.sourceforge.net/
EDIT: The modules package has not been updated since 2012 but still works ok for the basics. All the new features, bells and whistles happen in lmod this day (which I like it more): https://www.tacc.utexas.edu/research-development/tacc-projects/lmod
Another workaround that I don't see mentioned is to write the variable value to a file.
I ran into a very similar issue where I wanted to be able to run the last set test (instead of all my tests). My first plan was to write one command for setting the env variable TESTCASE, and then have another command that would use this to run the test. Needless to say that I had the same exact issue as you did.
But then I came up with this simple hack:
First command ( testset ):
#!/bin/bash
if [ $# -eq 1 ]
then
echo $1 > ~/.TESTCASE
echo "TESTCASE has been set to: $1"
else
echo "Come again?"
fi
Second command (testrun ):
#!/bin/bash
TESTCASE=$(cat ~/.TESTCASE)
drush test-run $TESTCASE
You can instruct the child process to print its environment variables (by calling "env"), then loop over the printed environment variables in the parent process and call "export" on those variables.
The following code is based on Capturing output of find . -print0 into a bash array
If the parent shell is the bash, you can use
while IFS= read -r -d $'\0' line; do
export "$line"
done < <(bash -s <<< 'export VARNAME=something; env -0')
echo $VARNAME
If the parent shell is the dash, then read does not provide the -d flag and the code gets more complicated
TMPDIR=$(mktemp -d)
mkfifo $TMPDIR/fifo
(bash -s << "EOF"
export VARNAME=something
while IFS= read -r -d $'\0' line; do
echo $(printf '%q' "$line")
done < <(env -0)
EOF
) > $TMPDIR/fifo &
while read -r line; do export "$(eval echo $line)"; done < $TMPDIR/fifo
rm -r $TMPDIR
echo $VARNAME
Under OS X bash you can do the following:
Create the bash script file to unset the variable
#!/bin/bash
unset http_proxy
Make the file executable
sudo chmod 744 unsetvar
Create alias
alias unsetvar='source /your/path/to/the/script/unsetvar'
It should be ready to use so long you have the folder containing your script file appended to the path.
It's not what I would call outstanding, but this also works if you need to call the script from the shell anyway. It's not a good solution, but for a single static environment variable, it works well enough.
1.) Create a script with a condition that exits either 0 (Successful) or 1 (Not successful)
if [[ $foo == "True" ]]; then
exit 0
else
exit 1
2.) Create an alias that is dependent on the exit code.
alias='myscript.sh && export MyVariable'
You call the alias, which calls the script, which evaluates the condition, which is required to exit zero via the '&&' in order to set the environment variable in the parent shell.
This is flotsam, but it can be useful in a pinch.
You can invoke another one Bash with the different bash_profile.
Also, you can create special bash_profile for using in multi-bashprofile environment.
Remember that you can use functions inside of bashprofile, and that functions will be avialable globally.
for example, "function user { export USER_NAME $1 }" can set variable in runtime, for example: user olegchir && env | grep olegchir
Another option is to use "Environment Modules" (http://modules.sourceforge.net/). This unfortunately introduces a third language into the mix. You define the environment with the language of Tcl, but there are a few handy commands for typical modifications (prepend vs. append vs set). You will also need to have environment modules installed. You can then use module load *XXX* to name the environment you want. The module command is basically a fancy alias for the eval mechanism described above by Thomas Kammeyer. The main advantage here is that you can maintain the environment in one language and rely on "Environment Modules" to translate it to sh, ksh, bash, csh, tcsh, zsh, python (?!?!!), etc.
I created a solution using pipes, eval and signal.
parent() {
if [ -z "$G_EVAL_FD" ]; then
die 1 "Rode primeiro parent_setup no processo pai"
fi
if [ $(ppid) = "$$" ]; then
"$#"
else
kill -SIGUSR1 $$
echo "$#">&$G_EVAL_FD
fi
}
parent_setup() {
G_EVAL_FD=99
tempfile=$(mktemp -u)
mkfifo "$tempfile"
eval "exec $G_EVAL_FD<>'$tempfile'"
rm -f "$tempfile"
trap "read CMD <&$G_EVAL_FD; eval \"\$CMD\"" USR1
}
parent_setup #on parent shell context
( A=1 ); echo $A # prints nothing
( parent A=1 ); echo $A # prints 1
It might work with any command.
I don't see any answer documenting how to work around this problem with cooperating processes. A common pattern with things like ssh-agent is to have the child process print an expression which the parent can eval.
bash$ eval $(shh-agent)
For example, ssh-agent has options to select Csh or Bourne-compatible output syntax.
bash$ ssh-agent
SSH2_AUTH_SOCK=/tmp/ssh-era/ssh2-10690-agent; export SSH2_AUTH_SOCK;
SSH2_AGENT_PID=10691; export SSH2_AGENT_PID;
echo Agent pid 10691;
(This causes the agent to start running, but doesn't allow you to actually use it, unless you now copy-paste this output to your shell prompt.) Compare:
bash$ ssh-agent -c
setenv SSH2_AUTH_SOCK /tmp/ssh-era/ssh2-10751-agent;
setenv SSH2_AGENT_PID 10752;
echo Agent pid 10752;
(As you can see, csh and tcsh uses setenv to set varibles.)
Your own program can do this, too.
bash$ foo=$(makefoo)
Your makefoo script would simply calculate and print the value, and let the caller do whatever they want with it -- assigning it to a variable is a common use case, but probably not something you want to hard-code into the tool which produces the value.
Technically, that is correct -- only 'eval' doesn't fork another shell. However, from the point of view of the application you're trying to run in the modified environment, the difference is nil: the child inherits the environment of its parent, so the (modified) environment is conveyed to all descending processes.
Ipso facto, the changed environment variable 'sticks' -- as long as you are running under the parent program/shell.
If it is absolutely necessary for the environment variable to remain after the parent (Perl or shell) has exited, it is necessary for the parent shell to do the heavy lifting. One method I've seen in the documentation is for the current script to spawn an executable file with the necessary 'export' language, and then trick the parent shell into executing it -- always being cognizant of the fact that you need to preface the command with 'source' if you're trying to leave a non-volatile version of the modified environment behind. A Kluge at best.
The second method is to modify the script that initiates the shell environment (.bashrc or whatever) to contain the modified parameter. This can be dangerous -- if you hose up the initialization script it may make your shell unavailable the next time it tries to launch. There are plenty of tools for modifying the current shell; by affixing the necessary tweaks to the 'launcher' you effectively push those changes forward as well.
Generally not a good idea; if you only need the environment changes for a particular application suite, you'll have to go back and return the shell launch script to its pristine state (using vi or whatever) afterwards.
In short, there are no good (and easy) methods. Presumably this was made difficult to ensure the security of the system was not irrevocably compromised.
The short answer is no, you cannot alter the environment of the parent process, but it seems like what you want is an environment with custom environment variables and the shell that the user has chosen.
So why not simply something like
#!/usr/bin/env bash
FOO=foo $SHELL
Then when you are done with the environment, just exit.
You could always use aliases
alias your_env='source ~/scripts/your_env.sh'
I did this many years ago. If I rememeber correctly, I included an alias in each of .bashrc and .cshrc, with parameters, aliasing the respective forms of setting the environment to a common form.
Then the script that you will source in any of the two shells has a command with that last form, that is suitable aliased in each shell.
If I find the concrete aliases, I will post them.
Other than writings conditionals depending on what $SHELL/$TERM is set to, no. What's wrong with using Perl? It's pretty ubiquitous (I can't think of a single UNIX variant that doesn't have it), and it'll spare you the trouble.
I have just started using Linux and I am curious how shell built-in commands such as cd are defined.
Also, I'd appreciate if someone could explain how they are implemented and executed.
If you want to see how bash builtins are defined then you just need to look at Section 4 of The Bash Man Page.
If, however, you want to know how bash bultins are implemented, you'll need to look at the Bash source code because these commands are compiled into the bash executable.
One fast and easy way to see whether or not a command is a bash builtin is to use the help command. Example, help cd will show you how the bash builtin of 'cd' is defined. Similarly for help echo.
The actual set of built-ins varies from shell to shell. There are:
Special built-in utilities, which must be built-in, because they have some special properties
Regular built-in utilities, which are almost always built-in, because of the performance or other considerations
Any standard utility can be also built-in if a shell implementer wishes.
You can find out whether the utility is built in using the type command, which is supported by most shells (although its output is not standardized). An example from dash:
$ type ls
ls is /bin/ls
$ type cd
cd is a shell builtin
$ type exit
exit is a special shell builtin
Re cd utility, theoretically there's nothing preventing a shell implementer to implement it as external command. cd cannot change the shell's current directory directly, but, for instance, cd could communicate new directory to the shell process via a socket. But nobody does so because there's no point. Except very old shells (where there was not a notion of built-ins), where cd used some dirty system hack to do its job.
How is cd implemented inside the shell? The basic algorithm is described here. It can also do some work to support shell's extra features.
Manjari,
Check the source code of bash shell from ftp://ftp.gnu.org/gnu/bash/bash-2.05b.tar.gz
You will find that the definition of shell built-in commands in not in a separate binary executable but its within the shell binary itself (the name shell built-in clearly suggests this).
Every Unix shell has at least some builtin commands. These builtin commands are part of the shell, and are implemented as part of the shell's source code. The shell recognizes that the command that it was asked to execute was one of its builtins, and it performs that action on its own, without calling out to a separate executable. Different shells have different builtins, though there will be a whole lot of overlap in the basic set.
Sometimes, builtins are builtin for performance reasons. In this case, there's often also a version of that command in $PATH (possibly with a different feature set, different set of recognized command line arguments, etc), but the shell decided to implement the command as a builtin as well so that it could save the work of spawning off a short-lived process to do some work that it could do itself. That's the case for bash and printf, for example:
$ type printf
printf is a shell builtin
$ which printf
/usr/bin/printf
$ printf
printf: usage: printf [-v var] format [arguments]
$ /usr/bin/printf
/usr/bin/printf: missing operand
Try `/usr/bin/printf --help' for more information.
Note that in the above example, printf is both a shell builtin (implemented as part of bash itself), as well as an external command (located at /usr/bin/printf). Note that they behave differently as well - when called with no arguments, the builtin version and the command version print different error messages. Note also the -v var option (store the results of this printf into a shell variable named var) can only be done as part of the shell - subprocesses like /usr/bin/printf have no access to the variables of the shell that executed them.
And that brings us to the 2nd part of the story: some commands are builtin because they need to be. Some commands, like chmod, are thin wrappers around system calls. When you run /bin/chmod 777 foo, the shell forks, execs /bin/chmod (passing "777" and "foo") as arguments, and the new chmod process runs the C code chmod("foo", 777); and then returns control to the shell. This wouldn't work for the cd command, though. Even though cd looks like the same case as chmod, it has to behave differently: if the shell spawned another process to execute the chdir system call, it would change the directory only for that newly spawned process, not the shell. Then, when the process returned, the shell would be left sitting in the same directory as it had been in all along - therefore cd needs to be implemented as a shell builtin.
A Shell builtin -- http://linux.about.com/library/cmd/blcmdl1_builtin.htm
for eg. -
which cd
/usr/bin/which: no cd in (/usr/bin:/usr/local/bin......
Not a shell builtin but a binary.
which ls
/bin/ls
http://ss64.com/bash/ this will help you.
and here is shell scripting guide
http://www.freeos.com/guides/lsst/