I don't know how helpful my query is to understand the problem. Actually i am working on an application. The flow is i have a jsf page where two combo boxes are present. Once is select option-1 the second combo gets populated. Then we press the next button and based on second option, second jsf page is loaded. Now when i go the second page and refresh, it pushes me back to the first page and gives a validation error. I am unable to understand what's happening. Any points would be helpful. I am attaching the screen shots below.
Any pointers would be helpful.
Ben
Related
One of my clients has a replica copy of a database on two different Domino Servers. On one of the servers if the user clicks on any white space on a view or form they get the following error:
While the database on the test server does not throw this error. My server likewise does not throw this error either. as far as I can determine they are both running the same release of Domino.
I have search my code but can't find any reason for this error.
Any pointers where to look.
Check for eventHandlers on your page, looking for one associated to a component that does not have an ID. I think what happens is that if you have an eventHandler on a button, comboBox etc that does not have an ID, it gets associated to whatever contains the button, comboBox etc. So it triggers when you click in that area.
If you find one, add an ID and it will resolve the click problem.
I'm not 100% sure what the refreshId issue is, maybe the eventHandler in question is set refreshMode="partial" but not refreshId set, so it's trying to refresh the component containing the eventHandler, which is the one that doesn't have an ID. I could understand how that would cause a problem.
I have set up the jQuery-Validation-Engine addon (https://github.com/posabsolute/jQuery-Validation-Engine) and it works great on the submit button.
However, since i invoked a tab-based interface, it doesn't really bring the user back to the proper tab with the error fields.
As a work around, i've decided its better to validate each tab when leaving to the next one (as it is a step-wise tab) so that the button click at the end will only 'really' need to correct any errors on the currently displayed tab.
I'm using a simple anchor to call some div swaps (using negative margins for content off-page).
I'd like to invoke the validation method to this as well.
Documentation says it can only be attached to a form element.
Any ideas?
Update- i ditched the tab idea and am now using one big form so this no longer really applies.
No support led to going after a different approach. No longer needed.
I have a problem that have me stumped.
I have been searching for a solution, but haven't found a working one yet. The solutions I seen introduces other issues.
Here is the scenario:
I have a frameset with two frames: 'Navigator' and 'Main'.
In the 'Navigator' frame I display a form called 'Navigator'. It contains an outline, to display a menu.
In the 'Main' frame I display the view selected by the user in the navigator.
So this is a very traditional Notes client application.
I now want to add a checkbox at the top of the view (in the action bar), allowing the user to filter the view by his/her own name. I use #SetViewInfo for this, and it all works perfect.
The issue is when the user switch views. The #SetViewInfo filter stays active when switching to a different view, so after some searching I found some solutions:
In http://www-01.ibm.com/support/docview.wss?uid=swg21204481 IBM suggests to put the following code in the QuerySave event:
#SetViewInfo([SetViewFilter]; temp ; 0 ;1)
When I am switching view or closing the view, I get the error message "Cannot execute the specified command".
In http://www-10.lotus.com/ldd/bpmpblog.nsf/dx/using-setviewinfo-in-a-notes-client-application-to-create-a-user-specific-view Andre Guirard suggests to put the following code in the QuerySave event:
#SetTargetFrame("frameName");
#UpdateFormulaContext;
#Command([OpenView]; #Subset(#ViewTitle; -1));
#SetViewInfo([SetViewFilter]; ""; "columnName"; 1)
I modify this to match my frame name and the programatic name of the first column in my view:
#SetTargetFrame("Main");
#UpdateFormulaContext;
#Command([OpenView]; #Subset(#ViewTitle; -1));
#SetViewInfo([SetViewFilter]; ""; "Adjuster"; 1)
This works perfectly when switching between view. But when I close the application while I am in this particular filtered view, the application is re-opened automatically. This happens no matter if the filter is enabled or not when closing the view.
However, when the view repopens, the frameset is not reloaded, it is just the view with the built-in view navigator to the left.
I finally got this to work by (in the built-in view navigator) selecting another view that the one where I filter data. This fixed the issue for a while, but then it starts again, and the filtered view is active in the navigator.
Obviously it is the OpenView command that is causing this, but if I remove just that line, I get the "Cannot execute the specified command" error again.
Any suggestions/pointers? I am using Notes 8.5.3 running on Windows 7 Professional.
This question can also be found in the IBM developerWorks forum for Notes 8.5:
http://www-10.lotus.com/ldd/nd85forum.nsf/DateAllThreadedWeb/08c73910571306c485257b2b0061ef91
First thing, I would suggest to make sure your view frame is always called "NotesView". You will have much less compatibility issues if you do this.
Secondly, I presume when you say you put it in the QuerySave event you really mean the QueryClose event? Views do not have a QuerySave event.
Thirdly, I find the #UpdateFormulaContext line is not needed. This is what I have in my view QueryClose...
#SetTargetFrame("NotesView");
#Command([OpenView]; #Subset(#ViewTitle; -1));
#SetViewInfo([SetViewFilter]; ""; "<programmaticColumnName>"; 1)
And I can close the app while in the view without any problems.
Background: Xpage with multiple data sources. Each row of tabbed table contains an edit panel bound to a different data source than the main page. Each page contains a table to enter new documents. These documents are children of the main document. There is a view control that shows the user created documents immediately. The button in the table saves the document in addition to adding some control fields. It does a partial refresh of the editPanel.
Recently I added validation to the fields in the entry table. I use a function, and prevent updating from anything but the button. I am using Tommy Valand's method from this blog post: http://dontpanic82.blogspot.com/2010/03/xpages-making-validation-behave.html. If I don't use Tommy's method, then the validators fire when switching tabs, and are useless.
All of this works sort of, but I am experiencing the following issues.
1) I have to push the button twice to get the partial refresh to fire. Not only that, but the validation messages to not fire until the button is pushed twice. The first part was still an issue prior to adding the validation.
2) The table values do not clear after the refresh does happen. This used to work prior to adding the validation. The only way to get the values to clear now, is to do a full refresh (F5).
I really just need partial refresh to behave like it should. Any help is greatly appreciated.
I am answering my own question because I think that I might have found out why the partial refresh was acting so flaky. Here is what I did that solved my issues: Each tab had an editPanel. If I make the edit panel do a partial refresh to itself then the buttons on that panel seems to behave as you would expect them to.
When I create a new core control panel, the default in No submission. I do not know whether this issue manifests itself only when using multiple data sources and/or tabbed tables. Hopefully this fix will be of use to someone down the road. It is worth a try if you are having issues with partial refresh working correctly.
Actually, I want to store some data in background page and the popup page just show that part of data say Data as a div element created in background page document.createElement("div"). Here, the background page will register some listeners to the tab update and change the Data elements accordingly. What the popup will do is to get that Data and appendit use the document.appendChild(Data).
(The purpose I intend is this will cause the popup changes immediately while the tab updage is triggered.)
However, the elements are shown as usual, what I am facing very headache is I have registered the onclick for the div object in backgroundpage as onclick="chrome.extension.getBackgroundPage().somefunc()". However, the first time, all the click will triger the right behavior but after the popup loses foucs and get focus again, all the click won't work.
I try to put something like change the onclick="somefunc()" and leave the func within the script of popup page. And there I want to log whether it is called by console.log("clicked"). Here, something unbelievable happens, the function is succefully trigerred BUT the console is null here, I cannot even call chrome.extension.getBackgroundPage() as well.
Here are a list of questions, maybe very hard to express for me...
1. Whether I can reuse the DOM element from the background page to the popup page directly by appendChild(chrome.extension.getBackgroundPage().getElementById()?
2.Will the onclick event registered in the background page still work in the popup pages?
3. What's the problem with the problem I am encountering? I have tried many ways to find out the reason but all in vain at last...
Best Regards,
If you need any more information, please let me know.
(PS: I am wonderning if it is called something like the event propogation, however, I am not an expert in this two pages communicating...)