My page has Ajax show/hide functionality.
During the initial page load my bean methods that are inside a non rendered <f:subview> or <h:panelGroup> are not called. When re-render the #form using Ajax, my bean methods are getting called although the relevant subviews are not rendered. Is this what should happen? (I am using JSF 2.2)
This is the expected behaviour as per my comment above. Unfortunately it comes with some ugly behaviour.
If you an object that is doing anything when using the list, it will work fine on your first request. Even if you have taken your precautions say by loading something with f:event this will not save you on the following AJAX request.
Example:
If you use JPA with each bean managed for the scope of the request and that bean has a lazy collection that is not rendered this will cause the following:
Request 1: Non-rendered components will not be touched i.e. Lazy collections will not initialize
Request 2(Ajax): JSF will try to restore the full view calling your non-loaded lazy collection resulting to an exception.
Related
There are lot of materials out there differentiating value attribute and binding attribute in JSF.
I'm interested in how both approaches differ from each other. Given:
public class User {
private String name;
private UICommand link;
// Getters and setters omitted.
}
<h:form>
<h:commandLink binding="#{user.link}" value="#{user.name}" />
</h:form>
It is pretty straight forward what happens when a value attribute is specified. The getter runs to return the name property value of the User bean. The value is printed to HTML output.
But I couldn't understand how binding works. How does the generated HTML maintain a binding with the link property of the User bean?
Below is the relevant part of the generated output after manual beautification and commenting (note that the id j_id_jsp_1847466274_1 was auto-generated and that there are two hidden input widgets).
I'm using Sun's JSF RI, version 1.2.
<form action="/TestJSF/main.jsf" enctype="application/x-www-form-urlencoded"
id="j_id_jsp_1847466274_1" method="post" name="j_id_jsp_1847466274_1">
<input name="j_id_jsp_1847466274_1" type="hidden" value="j_id_jsp_1847466274_1">
Name
<input autocomplete="off" id="javax.faces.ViewState" name="javax.faces.ViewState"
type="hidden" value="-908991273579182886:-7278326187282654551">
</form>
Where is the binding stored here?
How does it work?
When a JSF view (Facelets/JSP file) get built/restored, a JSF component tree will be produced. At that moment, the view build time, all binding attributes are evaluated (along with id attribtues and taghandlers like JSTL). When the JSF component needs to be created before being added to the component tree, JSF will check if the binding attribute returns a precreated component (i.e. non-null) and if so, then use it. If it's not precreated, then JSF will autocreate the component "the usual way" and invoke the setter behind binding attribute with the autocreated component instance as argument.
In effects, it binds a reference of the component instance in the component tree to a scoped variable. This information is in no way visible in the generated HTML representation of the component itself. This information is in no means relevant to the generated HTML output anyway. When the form is submitted and the view is restored, the JSF component tree is just rebuilt from scratch and all binding attributes will just be re-evaluated like described in above paragraph. After the component tree is recreated, JSF will restore the JSF view state into the component tree.
Component instances are request scoped!
Important to know and understand is that the concrete component instances are effectively request scoped. They're newly created on every request and their properties are filled with values from JSF view state during restore view phase. So, if you bind the component to a property of a backing bean, then the backing bean should absolutely not be in a broader scope than the request scope. See also JSF 2.0 specitication chapter 3.1.5:
3.1.5 Component Bindings
...
Component bindings are often used in conjunction with JavaBeans that are dynamically instantiated via the Managed
Bean Creation facility (see Section 5.8.1 “VariableResolver and the Default VariableResolver”). It is strongly
recommend that application developers place managed beans that are pointed at by component binding expressions in
“request” scope. This is because placing it in session or application scope would require thread-safety, since
UIComponent instances depends on running inside of a single thread. There are also potentially negative impacts on
memory management when placing a component binding in “session” scope.
Otherwise, component instances are shared among multiple requests, possibly resulting in "duplicate component ID" errors and "weird" behaviors because validators, converters and listeners declared in the view are re-attached to the existing component instance from previous request(s). The symptoms are clear: they are executed multiple times, one time more with each request within the same scope as the component is been bound to.
And, under heavy load (i.e. when multiple different HTTP requests (threads) access and manipulate the very same component instance at the same time), you may face sooner or later an application crash with e.g. Stuck thread at UIComponent.popComponentFromEL, or Threads stuck at 100% CPU utilization in HashMap during JSF saveState(), or even some "strange" IndexOutOfBoundsException or ConcurrentModificationException coming straight from JSF implementation source code while JSF is busy saving or restoring the view state (i.e. the stack trace indicates saveState() or restoreState() methods and like).
Also, as a single component basically references the rest of the entire component tree via getParent() and getChildren(), when binding a single component to a view or session scoped bean, you're essentially saving the entire JSF component tree in the HTTP session for nothing. This will get really costly in terms of available server memory when you have relatively a lot of components in the view.
Using binding on a bean property is bad practice
Regardless, using binding this way, binding a whole component instance to a bean property, even on a request scoped bean, is in JSF 2.x a rather rare use case and generally not the best practice. It indicates a design smell. You normally declare components in the view side and bind their runtime attributes like value, and perhaps others like styleClass, disabled, rendered, etc, to normal bean properties. Then, you just manipulate exactly that bean property you want instead of grabbing the whole component and calling the setter method associated with the attribute.
In cases when a component needs to be "dynamically built" based on a static model, better is to use view build time tags like JSTL, if necessary in a tag file, instead of createComponent(), new SomeComponent(), getChildren().add() and what not. See also How to refactor snippet of old JSP to some JSF equivalent?
Or, if a component needs to be "dynamically rendered" based on a dynamic model, then just use an iterator component (<ui:repeat>, <h:dataTable>, etc). See also How to dynamically add JSF components.
Composite components is a completely different story. It's completely legit to bind components inside a <cc:implementation> to the backing component (i.e. the component identified by <cc:interface componentType>. See also a.o. Split java.util.Date over two h:inputText fields representing hour and minute with f:convertDateTime and How to implement a dynamic list with a JSF 2.0 Composite Component?
Only use binding in local scope
However, sometimes you'd like to know about the state of a different component from inside a particular component, more than often in use cases related to action/value dependent validation. For that, the binding attribute can be used, but not in combination with a bean property. You can just specify an in the local EL scope unique variable name in the binding attribute like so binding="#{foo}" and the component is during render response elsewhere in the same view directly as UIComponent reference available by #{foo}. Here are several related questions where such a solution is been used in the answer:
Validate input as required only if certain command button is pressed
How to render a component only if another component is not rendered?
JSF 2 dataTable row index without dataModel
Primefaces dependent selectOneMenu and required="true"
Validate a group of fields as required when at least one of them is filled
How to change css class for the inputfield and label when validation fails?
Getting JSF-defined component with Javascript
Use an EL expression to pass a component ID to a composite component in JSF
(and that's only from the last month...)
See also:
How to use component binding in JSF right ? (request-scoped component in session scoped bean)
View scope: java.io.NotSerializableException: javax.faces.component.html.HtmlInputText
Binding attribute causes duplicate component ID found in the view
each JSF component renders itself out to HTML and has complete control over what HTML it produces. There are many tricks that can be used by JSF, and exactly which of those tricks will be used depends on the JSF implementation you are using.
Ensure that every from input has a totaly unique name, so that when the form gets submitted back to to component tree that rendered it, it is easy to tell where each component can read its value form.
The JSF component can generate javascript that submitts back to the serer, the generated javascript knows where each component is bound too, because it was generated by the component.
For things like hlink you can include binding information in the url as query params or as part of the url itself or as matrx parameters. for examples.
http:..../somelink?componentId=123 would allow jsf to look in the component tree to see that link 123 was clicked. or it could e htp:..../jsf;LinkId=123
The easiest way to answer this question is to create a JSF page with only one link, then examine the html output it produces. That way you will know exactly how this happens using the version of JSF that you are using.
There are lot of materials out there differentiating value attribute and binding attribute in JSF.
I'm interested in how both approaches differ from each other. Given:
public class User {
private String name;
private UICommand link;
// Getters and setters omitted.
}
<h:form>
<h:commandLink binding="#{user.link}" value="#{user.name}" />
</h:form>
It is pretty straight forward what happens when a value attribute is specified. The getter runs to return the name property value of the User bean. The value is printed to HTML output.
But I couldn't understand how binding works. How does the generated HTML maintain a binding with the link property of the User bean?
Below is the relevant part of the generated output after manual beautification and commenting (note that the id j_id_jsp_1847466274_1 was auto-generated and that there are two hidden input widgets).
I'm using Sun's JSF RI, version 1.2.
<form action="/TestJSF/main.jsf" enctype="application/x-www-form-urlencoded"
id="j_id_jsp_1847466274_1" method="post" name="j_id_jsp_1847466274_1">
<input name="j_id_jsp_1847466274_1" type="hidden" value="j_id_jsp_1847466274_1">
Name
<input autocomplete="off" id="javax.faces.ViewState" name="javax.faces.ViewState"
type="hidden" value="-908991273579182886:-7278326187282654551">
</form>
Where is the binding stored here?
How does it work?
When a JSF view (Facelets/JSP file) get built/restored, a JSF component tree will be produced. At that moment, the view build time, all binding attributes are evaluated (along with id attribtues and taghandlers like JSTL). When the JSF component needs to be created before being added to the component tree, JSF will check if the binding attribute returns a precreated component (i.e. non-null) and if so, then use it. If it's not precreated, then JSF will autocreate the component "the usual way" and invoke the setter behind binding attribute with the autocreated component instance as argument.
In effects, it binds a reference of the component instance in the component tree to a scoped variable. This information is in no way visible in the generated HTML representation of the component itself. This information is in no means relevant to the generated HTML output anyway. When the form is submitted and the view is restored, the JSF component tree is just rebuilt from scratch and all binding attributes will just be re-evaluated like described in above paragraph. After the component tree is recreated, JSF will restore the JSF view state into the component tree.
Component instances are request scoped!
Important to know and understand is that the concrete component instances are effectively request scoped. They're newly created on every request and their properties are filled with values from JSF view state during restore view phase. So, if you bind the component to a property of a backing bean, then the backing bean should absolutely not be in a broader scope than the request scope. See also JSF 2.0 specitication chapter 3.1.5:
3.1.5 Component Bindings
...
Component bindings are often used in conjunction with JavaBeans that are dynamically instantiated via the Managed
Bean Creation facility (see Section 5.8.1 “VariableResolver and the Default VariableResolver”). It is strongly
recommend that application developers place managed beans that are pointed at by component binding expressions in
“request” scope. This is because placing it in session or application scope would require thread-safety, since
UIComponent instances depends on running inside of a single thread. There are also potentially negative impacts on
memory management when placing a component binding in “session” scope.
Otherwise, component instances are shared among multiple requests, possibly resulting in "duplicate component ID" errors and "weird" behaviors because validators, converters and listeners declared in the view are re-attached to the existing component instance from previous request(s). The symptoms are clear: they are executed multiple times, one time more with each request within the same scope as the component is been bound to.
And, under heavy load (i.e. when multiple different HTTP requests (threads) access and manipulate the very same component instance at the same time), you may face sooner or later an application crash with e.g. Stuck thread at UIComponent.popComponentFromEL, or Threads stuck at 100% CPU utilization in HashMap during JSF saveState(), or even some "strange" IndexOutOfBoundsException or ConcurrentModificationException coming straight from JSF implementation source code while JSF is busy saving or restoring the view state (i.e. the stack trace indicates saveState() or restoreState() methods and like).
Also, as a single component basically references the rest of the entire component tree via getParent() and getChildren(), when binding a single component to a view or session scoped bean, you're essentially saving the entire JSF component tree in the HTTP session for nothing. This will get really costly in terms of available server memory when you have relatively a lot of components in the view.
Using binding on a bean property is bad practice
Regardless, using binding this way, binding a whole component instance to a bean property, even on a request scoped bean, is in JSF 2.x a rather rare use case and generally not the best practice. It indicates a design smell. You normally declare components in the view side and bind their runtime attributes like value, and perhaps others like styleClass, disabled, rendered, etc, to normal bean properties. Then, you just manipulate exactly that bean property you want instead of grabbing the whole component and calling the setter method associated with the attribute.
In cases when a component needs to be "dynamically built" based on a static model, better is to use view build time tags like JSTL, if necessary in a tag file, instead of createComponent(), new SomeComponent(), getChildren().add() and what not. See also How to refactor snippet of old JSP to some JSF equivalent?
Or, if a component needs to be "dynamically rendered" based on a dynamic model, then just use an iterator component (<ui:repeat>, <h:dataTable>, etc). See also How to dynamically add JSF components.
Composite components is a completely different story. It's completely legit to bind components inside a <cc:implementation> to the backing component (i.e. the component identified by <cc:interface componentType>. See also a.o. Split java.util.Date over two h:inputText fields representing hour and minute with f:convertDateTime and How to implement a dynamic list with a JSF 2.0 Composite Component?
Only use binding in local scope
However, sometimes you'd like to know about the state of a different component from inside a particular component, more than often in use cases related to action/value dependent validation. For that, the binding attribute can be used, but not in combination with a bean property. You can just specify an in the local EL scope unique variable name in the binding attribute like so binding="#{foo}" and the component is during render response elsewhere in the same view directly as UIComponent reference available by #{foo}. Here are several related questions where such a solution is been used in the answer:
Validate input as required only if certain command button is pressed
How to render a component only if another component is not rendered?
JSF 2 dataTable row index without dataModel
Primefaces dependent selectOneMenu and required="true"
Validate a group of fields as required when at least one of them is filled
How to change css class for the inputfield and label when validation fails?
Getting JSF-defined component with Javascript
Use an EL expression to pass a component ID to a composite component in JSF
(and that's only from the last month...)
See also:
How to use component binding in JSF right ? (request-scoped component in session scoped bean)
View scope: java.io.NotSerializableException: javax.faces.component.html.HtmlInputText
Binding attribute causes duplicate component ID found in the view
each JSF component renders itself out to HTML and has complete control over what HTML it produces. There are many tricks that can be used by JSF, and exactly which of those tricks will be used depends on the JSF implementation you are using.
Ensure that every from input has a totaly unique name, so that when the form gets submitted back to to component tree that rendered it, it is easy to tell where each component can read its value form.
The JSF component can generate javascript that submitts back to the serer, the generated javascript knows where each component is bound too, because it was generated by the component.
For things like hlink you can include binding information in the url as query params or as part of the url itself or as matrx parameters. for examples.
http:..../somelink?componentId=123 would allow jsf to look in the component tree to see that link 123 was clicked. or it could e htp:..../jsf;LinkId=123
The easiest way to answer this question is to create a JSF page with only one link, then examine the html output it produces. That way you will know exactly how this happens using the version of JSF that you are using.
I have a complex problem with order of 'JSF bean life cycle actions'.
I have two beans with different scopes. The first, let's call it, managerBean is session scope bean. The second one, someBean has view scope (someBean really is many different beans). ManagerBean takes some action once per page loading and few others view scope beans are using the results of this action in their constructors.
Everything was working just fine until I've started getting forms IDs in xhtml files from java beans. Now action from managerBean is taken after someBean is created and I'm getting expected result only when the page is reloaded (on refresh, so someBean is using the first results of ManagerBean work).
This is how it looks like now:
<!-- mainTemplate is a main templete of the page which is rendered once
per page view (every other actions are taken via ajax). This is a place
of ManagerBean work after re rendering the page -->
<ui:composition template="/mainTemplate.xhtml">
<ui:define name="mainContent">
<h:form id="#{someBean.formID}">
some inputs
</h:form>
(...)
</ui:define>
</ui:composition>
So when form id was constant String everything worked like I want and now it doesn't. It looks like JSF must calculate ID first and take any other after this (including ManagerBean action).
My question is: Is there a way to change this situation?
If something isn't clear enought, please ask. I was trying to simplify the problem because it has many factors. Maybe all my thinking is wrong (the way I want to take some action per page and some actions after it).
Any help will be good!
The id (and binding) attribute of a JSF UI component is evaluated during view build time. The view build time is that moment when the XHTML source code is turned into a JSF UI component tree. All other attributes of a JSF UI component like value and all events like preRenderView are evaluated/executed after the view build time, usually during view render time (when the JSF UI component tree needs to produce HTML output). This is not something which you can change by just turning a setting or so. It's just the way how JSF works. You can't render something which isn't built yet. You can only change this by writing code the right way.
I can't think of any real world scenario why you need to make the ID attribute dynamic like this. If it were inside a <c:forEach>, or part of dynamic component generation, then okay, but this seems just to be a static form. So I would in first place recommend to forget it and just hardcode the ID in the view and rely on other variables (perhaps a hidden input field? depends all on concrete functional requirement which isn't mentioned anywhere in the question nor guessable based on the code posted so far).
If you really need to make it dynamic, then you need to split the formID property off from the view scoped bean and move it to a different and independent bean, perhaps an application scoped one.
See also:
JSTL in JSF2 Facelets... makes sense? - component's id attribute has same lifecycle as JSTL tags
I have a commandLink which has a "rendered" which is calculated based on values in a #RequestScoped bean. The commandLink uses f:ajax to call a listener but it appears that the method is never executed.
It turns out if I set rendered="#{true}" or no rendered attribute at all, the listener is executed properly. Is it possible that because the rendered is based on request scoped values which no longer exist at the time of the ajax postback (and hence result in a 'false'), that the listener is being skipped? Note that the f:ajax also performs a few execute actions which are performed successfully.
You should never use a request scoped bean to define the value of a rendered attribute of any UI component. Unless you take special care, the original bean is destroyed losing its values, a new one is created instead with each request. Thus the component will be hidden as the rendered attribute value is most probably not evaluated to true for the next request.
You should use the view scope instead for your bean. See an example here, but you should easily find other examples searching for something like 'jsf rendered attribute request scope bean'.
When using h:commandlink(or commandbutton) inside a rich:dataTable, the action specified is never invoked, neither is the corresponding managed bean instantiated(whether it is at request or session scope)...
instead, the same request is performed.. (page reloads)..
have seen what appeared to be similar issue on forums, but is not actually the problem i am having..
the h:commandlink /button work ok outside of the rich:datatable..
Does anyone have any advice?
here is a code snippet:
<h:commandLink id="commLink" actionListener="#{hBean.test}" action="#{hBean.viewTranslation}">
<h:outputText value="#{trans.translationName}"/>
</h:commandLink>
</rich:column>
The bean is apparently request scoped and the datamodel is not been loaded during bean's construction (at least, during apply request values phase of the subsequent request). You need to preserve the same datamodel for the subsequent request, else JSF cannot locate the row item associated with the clicked link. The most straightforward way is to load the datamodel in the bean's constructor or #PostConstruct method.
A quick fix/test is to put bean in session scope. The datamodel will then be saved in the session scope and be available in the subsequent request. But this has more impact on user experience (e.g. unexpected results when having the same page opened in different browser windows/tabs in the same session). If you're already on JSF 2.0 (which is likely not the case since you're using RichFaces), then the new view scope would have been the solution.
Related questions:
h:commandLink is not been invoked - contains an overview of all possible causes of this behaviour.
If you are using RichFaces 3.0.0 through 3.3.3, use the tag a4j:keepAlive. It will works even with request scope.