Is there a way to specify what type of project an item template is for besides CSharp and VB? I have tried setting ProjectType to Web and ProjectSubType to CSharp as it says in this article http://msdn.microsoft.com/en-us/library/ms171386(v=vs.110).aspx. This causes the item template to not appear anywhere. I've also tried the reverse, which gets it to show up under C#, but not under web.
Ideally I'd like for it to show under MVC, but even Web would just be fine. How can do I that?
Since this is a VSIX I can't and don't want to just drop it into the appropriate area of the item templates folder.
<ProjectType>CSharp</ProjectType>
<ProjectSubType>Web</ProjectSubType>
<RequiredFrameworkVersion>4.0</RequiredFrameworkVersion>
<NumberOfParentCategoriesToRollUp>2</NumberOfParentCategoriesToRollUp>
You need to mimic the hierarchy in you VSIX project where you included the template file. For example, if you want the template to appear under the node Web under C# and you have the template file under the folder ItemTemplates in your VSIX project, you need to move the template file to:
ItemTemplates > CSharp > Web
Then:
<ProjectType>CSharp</ProjectType>
<NumberOfParentCategoriesToRollUp>1</NumberOfParentCategoriesToRollUp>
Would be sufficient. You don't need to set <ProjectSubType></ProjectSubType>
Related
Is there any way that I can create a template within forms to utilize for every user in the company?
For instance; let's say I have the Sales Order Screen (SO301000) and the Document Detail grid configured in certain way, that display different amount of columns than the default (either more or less columns).
For each user I want to use this template (and all the ones created) that I will apply when I add the new user.
I'l appreciate any guidance and help.
EDIT:
I provided answer for Form element ASP template below. Although reading your question again I think what you're trying to do would be more along the lines of automating grid column configuration. We call this feature Default Table Layout.
There's a feature request for it here:
https://feedback.acumatica.com/ideas/ACU-I-415
The feature has been shipped in version 2017R2 and is documented here:
https://help.acumatica.com/(W(1))/Main?ScreenId=ShowWiki&pageid=30f3229f-20f1-4055-9c03-e0fe3b37080d
Image copy of documentation page:
For ASP Form templates
There are two ways to work with customizations in Acumatica:
As a Customization Project, everything is done directly in Acumatica
instance through the web browser using the Customization Project Editor.
As an extension library (DLL file) compiled in Visual Studio which is then included in the FILES section of a Customization Project.
For method 1, I believe creating custom templates would be a bit of a hack and would not be officially supported, if someone knows otherwise please chime in.
For method 2, we ship the Visual Studio templates with the Acumatica Configuration Wizard (Acumatica ERP Installer).
Those templates are in the following folder:
My Documents\Visual Studio 20XX\Templates\ItemTemplates\Visual C#
The templates will be available for ASP.NET solution only. You can open Acumatica Instance Website as a solution if the website is already deployed:
When you open Add New Item dialog:
The Acumatica Templates will be available:
Those are standard Visual Studio templates so you can copy and re-use them to create your own. Microsoft documentation for creating user template applies and you can follow their guidelines. Note that working with Visual Studio and creating your own template is somewhat less user friendly than using Acumatica Customization Project Editor.
Acumatica T100 covers using Visual Studio to create customizations and would be a good starting point to learn the techniques involved:
https://openuni.acumatica.com/courses/development/t100-introduction-to-acumatica-framework/
I'm very new to Liferay theme development and i'm trying to find the most optimal workflow for development.
So I've been experimenting with creating Web Content Templates and Web Content Structures within Liferay CMS configuration.
What I would ideally like to do is create my view "Web Content Structure" outside of Liferay configuration and instead have it as a view/template inside my theme files so that I can have my code peer reviewed and version controlled in Bitbucket.
Is this possible?
Alternatively is there a way to output the values of a given web content instance within my theme?
I'm building a theme for Liferay 7 by the way.
Thanks in advance
Richard
You can copy and paste the structure when you create them form the LFR editors into your source code repository.
Also if you know how to define the JSON you can do it straight in the file. The free market templates are even easier to edit in file format. When you're done, you need to go and upload the artefacts to the portal via the editor/file upload option.
You can't stick it into the theme because that approach would not allow you to do updates.
You can search for a community plugin or write your own one that would do structure/template updates during deploy.
According to requirement of application, I have developed a custom web part in Kentico 9. This web part is using with same functionality at various places but we have to use with different layout structure.
As per my understanding, we can create custom layouts for a single web part from "Layout Tab" in web part configuration. As I used same things with various Kentio built in web part like Logon form, Logon-Mini form, etc.
But while trying to create new layout for my custom web part, I am getting web part loading error and when I checked into event log it is showing following error:
The file
'/CMSVirtualFiles/WebPartLayouts/=vg=87a868ce-926c-4cb3-a441-b4f1d4310afc/TDNForgottenPassword/ForgottenPassword.ascx.cs'
does not exist.
Here, internally system looking for ".CS" file under "CMSVirtualFiles" folder, which has actually under the "CMSWebParts" directory in which I have created my user control.
Is there any specific configuration required in custom web part to implement multiple layout of it? Please help me and guide me, what am I missing or doing wrong?
Check your webpart code file property in the ascx file. You need to specifically declare the full relative path to the .cs file and not just the filename. For example:
Correct
CodeFile="~/CMSWebParts/Community/GroupRegistration.ascx.cs"
Incorrect
CodeFile="GroupRegistration.ascx.cs"
Please make sure you don't have the store virtual files in the file system setting enabled.
I have only ever deployed web parts from development by clicking F5. Now, I know I have to have a manifest file, feature file, etc and it all goes into a wsp file. I understand the wsp file is what gets added to Central Admin.
So my problem is this. I have found lots of sites that show how to use WSP Builder, but they don't seem to show how/where I add my web part to the WSP Builder project. My understanding is that somehow I should be able to use WSP Builder to create a wsp file containing my already-developed web part.
There are only two approaches that I see would work.
I create a WSPBuilder project (like all the how-tos on WSPBuilder show), then I assume I would somehow add my web part to that project - although I don't know how.
In my web part project, create WSPBuilder -> Build WSP. I have done this, and when I run stsadm on the resulting wsp file, I get it in Central Admin, but its not added to my Site Collection Features or my Web Part Gallery.
Can someone please explain this to me like I am a 6 year old? If you point me to another site, there is a good chance I have already seen it, so then I would ask you point me to the specific lines that tell me how to get my already existing web part packaged into the wsp.
To create a new web part feature with WSPBuilder:
Right-click on the name of your WSPBuilder project in Visual Studioand click Add, New Item.
Select WSPBuilder from the tree on the left and choose Web Part Feature from the list on the right of the dialog.
Enter the title of the web part feature and click OK.
In the dialog that appears enter the title, description and scope and click OK.
Your feature will now be created. You will then need to merge your existing web part code into this feature and configure its XML files.
Read this walkthrough by Tobias Zimmergren for more information. There is another walkthrough here.
Alex, got the right path to solve it. I think the small exception here is that wrongly spelt Add New Item instead of New Project.
I've been trying to follow the information from:
Long URL clipped to stop breaking the page
and
http://msdn.microsoft.com/en-us/library/ms415817.aspx
Which more or less have the same instructions. I've been copying the .dll file from the build over to the BIN directory of the Sharepoint site.
When I click the Web Part Gallery and hit new, both articles say that the web part should show up in the list.
I have tried every possible way that I can think, but my web part will not show up in that list. Is there a step that I missed somewhere? Are there permissions that I should be thinking about? How exactly does Sharepoint recognize that there is a new web part. Is it simply from having the assembly placed in the BIN directory, or is it from adding the control in the safe list of web.config?
I've added it to the safe controls list. I've tried every different combination that I could think of, but nothing has worked.
Do I need to rename the .DLL assembly to something else?
For the life of me I cannot figure this out.
I believe the minimum you need to have a WP show up in the "New" Part of the webPart Catalog, you need the dll in the "bin" folder (bin in the web dir, not the 12 hive :)) or in the GAC and a safe control entry. I would verify the Safe control entry:
Assembly = name of dll
NameSpace = well... The NameSpace where your WebPart class resides
TypeName = the name of your webPart class
You can wildcard the NameSpace and TypeName just to be sure you are getting there:
... Namespace="*" TypeName="*" ...
I would also recommend signing the assembly and putting in a PublicKeyToken=...
Also, try setting the trust level to WSS_Medium or Full.
If this doesn't work, you can try adding a .webpart file to the wpCatalog folder in your web dir.
Edit: Clarification
This has to be a mismatch between your assembly and what has been entered into web.config for the safecontrol entry.
The safecontrol entry is case sensitive - and the smallest of errors will stop is from showing on the 'New' listing of the web part gallery.
Also make sure you are editing the correct web.config! :-) Another common gotcha is that your web part class has to be public.
Hope this helps
Nick Swan
Have you tried using the WPPackager tool from Microsoft? I haven't touched SharePoint since v2003, and I know there was a handy tool for WP deployment for that platform. I'd offer a link to it, but 1) I can't remember its name, and 2) I'm not sure if it is a valid installation route for your version of SharePoint.
Wow, you have me stumped ... I would try deploying some other 3rd party "free" web parts manually and see if you can get those to show up. This site has a few:
http://www.sharepointblogs.com/mkruger/archive/2007/06/26/free-sharepoint-web-parts-3rd-party.aspx
Have you made sure that you set: [assembly: AllowPartiallyTrustedCallers]
in your AssemblyInfo file?
I am amazed no one else has chimed in on this. I guess next step would be to try to deploy it as a feature/solution.
Is this a simple hello world wp or are you doing something more?
To be honest, I am beginning to believe that it is your wss/moss configuration/settings that is hampering your efforts at the moment. Have you ever successfully deployed a WP to your farm? ... Is this a VPC dev farm or production?
I've been creating a few web parts over the past 2 weeks, but I have not used the "New Web Parts" section of the Web Part Gallery. Instead, I create a .dwp file (e.g. MyWebPart.dwp), which is more or less an XML file describing the web part, and I manually import it into the gallery.
The format for my .dwp files generally looks like this:
<?xml version="1.0" encoding="utf-8"?>
<WebPart xmlns="http://schemas.microsoft.com/WebPart/v2" >
<Title>My Sample Web Part</Title>
<Description>This web part displays "Hello World" on the page.</Description>
<Assembly>My.Assembly, Version=1.0.0.0, Culture=neutral, PublicKeyToken=3ed03eac7f647a61</Assembly>
<TypeName>My.Assembly.MyWebPartClassName</TypeName>
<!-- Specify initial values for any additional base class or custom properties here. -->
</WebPart>
This of course assumes that you've added this assembly as a "Safe Control". After you compile your assembly and move it into the bin/GAC for your SharePoint machine, go back to the web part gallery, click "Upload", and upload your .dwp file. You'll have to specify a few properties after uploading it.
Assuming your web part exists in your .dll, then you should see it added to the gallery list, and you can preview it or add it to a page at that point.