I can redirect all domain.com-s on a www.domain.com and it's working on the server like a charm:
<rewrite>
<rules>
<rule name="Canonical Host Name" stopProcessing="true">
<match url="(.*)" />
<conditions>
<add input="{HTTP_HOST}" negate="true" pattern="^www\.domain\.com$" />
</conditions>
<action type="Redirect" url="http://www.domain.com/{R:1}" redirectType="Permanent" />
</rule>
</rules>
</rewrite>
But is has one side effect - it is also working when I am on a testing environment, like on localhost and it always redirects on a production server.
How is it possible to add some condition that is would work on the server only?
This can be achieved using a second condition requesting the host to be a domain.com sub-domain:
<rewrite>
<rules>
<rule name="Canonical Host Name" stopProcessing="true">
<match url="(.*)" />
<conditions>
<add input="{HTTP_HOST}" pattern="domain\.com$" />
<add input="{HTTP_HOST}" negate="true" pattern="^www\.domain\.com$" />
</conditions>
<action type="Redirect" url="http://www.domain.com/{R:1}" />
</rule>
</rules>
</rewrite>
(note that you were missing a \ in your condition and that redirectType="Permanent" is optional)
Related
I have two domains. Both read from the same source. That is, the path of their files on the server is the same with same web.config file. I want both of them to be redirect to the HTTPS path without WWW, regardless of the conditions that are called in the URL. Similar to below
HTTP to HTTPS
WWW to non-WWW
for example.com and example.co
I tried to use the below code:
<rewrite>
<rules>
<rule name="Redirect to HTTPS without www" stopProcessing="true">
<match url="(.*)" />
<conditions logicalGrouping="MatchAll">
<add input="{HTTPS}" pattern="^OFF$" />
<add input="{HTTP_HOST}" pattern="^(www\.)?(.*)$" />
</conditions>
<action type="Redirect" url="https://{C:2}/{R:1}" redirectType="Permanent" />
</rule>
<rule name="Special case for HTTPS with www" stopProcessing="true">
<match url="(.*)" />
<conditions logicalGrouping="MatchAll">
<add input="{HTTPS}" pattern="^ON$" />
<add input="{HTTP_HOST}" pattern="^(www\.)(.*)$" />
</conditions>
<action type="Redirect" url="https://{C:2}/{R:1}" redirectType="Permanent" />
</rule>
</rules>
</rewrite>
But this code cannot be considered for both domains com and co. Because it redirects only to the com domain.
Try splitting the two different domain names into two rules, and add the full hostname to your rules, which will trigger your rule for a specific domain only:
<rewrite>
<rules>
<rule name="Redirect example.com to HTTPS without www" stopProcessing="true">
<match url="(.*)" />
<conditions logicalGrouping="MatchAll">
<add input="{HTTPS}" pattern="^OFF$" />
<add input="{HTTP_HOST}" pattern="^(www\.)?example.com$" />
</conditions>
<action type="Redirect" url="https://example.com/{R:1}" redirectType="Permanent" />
</rule>
<rule name="Redirect example.co to HTTPS without www" stopProcessing="true">
<match url="(.*)" />
<conditions logicalGrouping="MatchAll">
<add input="{HTTPS}" pattern="^OFF$" />
<add input="{HTTP_HOST}" pattern="^(www\.)?example.co$" />
</conditions>
<action type="Redirect" url="https://example.co/{R:1}" redirectType="Permanent" />
</rule>
</rules>
</rewrite>
I have tried all kinds of rewrite URL's and can't get IIS to send the URL of https://example.com/default.aspx/default.aspx to https://example.com/default.aspx
Google has indexed the site with the wrong URL when Bing got it right (go figure). Any help would be much appreciated. All my traffic is going to the wrong url (https://example.com/default.aspx/default.aspx).
<rewrite>
<rules>
<rule name="Redirect www.xxx.com to xxx.com" patternSyntax="ECMAScript" stopProcessing="true">
<match url=".*" />
<conditions>
<add input="{HTTP_HOST}" pattern="^https://example.com/default.aspx/default.aspx" />
</conditions>
<action type="Redirect" url="default.aspx" />
</rule>
<rule name="redirect two character to default" stopProcessing="true">
<match url="(.*)" />
<conditions>
<add input="{URL}" pattern="^/[a-z]{2}(/)?$" />
</conditions>
<action type="Redirect" url="default.aspx" appendQueryString="false" />
</rule>
</rules>
</rewrite>
There is some issue in your rule. {HTTP_HOST} only matches the hostname which is www.example.com it will not match the whole URL.
You could try below rule:
<rule name="Redirect www.xxx.com to xxx.com" enabled="true" patternSyntax="ECMAScript" stopProcessing="true">
<match url=".*" />
<conditions>
<add input="{HTTP_HOST}" pattern="www.example.com" />
<add input="{HTTPS}" pattern="on" />
<add input="{REQUEST_URI}" pattern="default/default|default.aspx/default.aspx" />
</conditions>
<action type="Redirect" url="default.aspx" />
</rule>
I need to redirect http to https on external network (internet), but on local network such as 192.168.1.100 works on http. I used this following configuration:
<system.webServer>
<rewrite>
<rules>
<rule name="HTTPS force" enabled="true" stopProcessing="true">
<match url="(.*)" />
<conditions>
<add input="{HTTPS}" pattern="^OFF$" />
</conditions>
<action type="Redirect" url="https://{HTTP_HOST}/{R:1}" redirectType="Permanent" />
</rule>
</rules>
</rewrite>
</system.webServer>
You can add an additional condition "host shouldn't match 192.168.1.100".
Your rule should be like that:
<rule name="HTTPS force" enabled="true" stopProcessing="true">
<match url="(.*)" />
<conditions>
<add input="{HTTPS}" pattern="^OFF$" />
<add input="{HTTP_HOST}" pattern="^192.168.1.100$" negate="true" />
</conditions>
<action type="Redirect" url="https://{HTTP_HOST}/{R:1}" redirectType="Permanent" />
</rule>
I am trying to force a website running under IIS to always run in https mode and redirect to it's full root name which includes www in order for the SSL certificate to work properly.
Below is the web.config entry:
<system.webServer>
<rewrite>
<rules>
<clear />
<rule name="Redirect to https" stopProcessing="true">
<match url="(.*)" />
<conditions>
<add input="{HTTPS}" pattern="off" ignoreCase="true" />
<add input="{HTTP_HOST}" pattern="^somewebsite.com$" ignoreCase="true" />
</conditions>
<action type="Redirect" redirectType="Permanent" url="https://www.{HTTP_HOST}{REQUEST_URI}" />
</rule>
</rules>
</rewrite>
</system.webServer>
This works on first time requests, for instance someone requests: somewebsite.com in the browser URI for the very first time, they will be automatically redirected to https://www.somewebsite.com. However, once the site is loaded and if user manually removes the www or https in the browser URI, the server does not perform subsequent redirects. Is that by design and is it possible for the rule to always execute?
This is what I use on all our live SSL sites. I use 2 rules and never had any problem with these:
<rule name="Redirect domain.com to www" patternSyntax="Wildcard" stopProcessing="true">
<match url="*" />
<conditions>
<add input="{HTTP_HOST}" pattern="domain.com" />
</conditions>
<action type="Redirect" url="https://www.domain.com/{R:0}" />
</rule>
<rule name="HTTP to HTTPS" stopProcessing="true">
<match url="(.*)" />
<conditions>
<add input="{HTTPS}" pattern="^OFF$" />
</conditions>
<action type="Redirect" url="https://{HTTP_HOST}/{R:1}" />
</rule>
I need to redirect non-www URLs to www URL for both HTTP and HTTPS URLs. I tried following rules in web.config.
<rule name="Redirect to WWW" stopProcessing="true">
<match url=".*" />
<conditions>
<add input="{HTTP_HOST}" pattern="^example.com$" />
</conditions>
<action type="Redirect" url="http://www.example.com/{R:0}" redirectType="Permanent" />
</rule>
<rule name="Redirect to WWW https" stopProcessing="true">
<match url=".*" />
<conditions>
<add input="{HTTPS}" pattern="^example.com$" />
</conditions>
<action type="Redirect" url="https://www.example.com/{R:0}" redirectType="Permanent" />
</rule>
It works perfectly for non-ssl URL but in case of SSL it redirect from https://example.com to http://www.example.com.
For a safer rule that works for both Match Any and Match All situations, you can use the Rewrite Map solution. It’s a perfectly good solution with the only drawback being the ever so slight extra effort to set it up since you need to create a rewrite map before you create the rule. In other words, if you choose to use this as your sole method of handling the protocol, you’ll be safe.
You can create a Rewrite Map called MapProtocol, you can use {MapProtocol:{HTTPS}} for the protocol within any rule action.
<rewrite>
<rules>
<rule name="Redirect to www" stopProcessing="true">
<match url="(.*)" />
<conditions trackAllCaptures="false">
<add input="{HTTP_HOST}" pattern="^example.com$" />
</conditions>
<action type="Redirect"
url="{MapProtocol:{HTTPS}}://www.example.com/{R:1}" />
</rule>
</rules>
<rewriteMaps>
<rewriteMap name="MapProtocol">
<add key="on" value="https" />
<add key="off" value="http" />
</rewriteMap>
</rewriteMaps>
</rewrite>
Reference
Other answers here are unnecessary long, here's the rule i use (just copy and paste) :
<rule name="ensurewww" stopProcessing="true">
<match url=".*" />
<conditions>
<add input="{CACHE_URL}" pattern="^(.+)://(?!www)(.*)" />
</conditions>
<action type="Redirect" url="{C:1}://www.{C:2}" redirectType="Permanent" />
</rule>
This will redirect to the www version while preserving the HTTP and HTTPS protocol
Hope this helps.
Since 2018, consider to use everytime https (SSL) !
So I use redirect to www and to https together.
<rule name="Redirect to www" stopProcessing="true">
<match url="(.*)" />
<conditions trackAllCaptures="false">
<add input="{HTTP_HOST}" pattern="^example.com$" />
</conditions>
<action type="Redirect" url="https://www.example.com/{R:1}" redirectType="Permanent" />
</rule>
<rule name="HTTP/S to HTTPS Redirect" enabled="true" stopProcessing="true">
<match url="(.*)" />
<conditions logicalGrouping="MatchAny">
<add input="{SERVER_PORT_SECURE}" pattern="^0$" />
</conditions>
<action type="Redirect" url="https://{HTTP_HOST}{REQUEST_URI}" redirectType="Permanent" />
</rule>
more info here :
https://forums.realmacsoftware.com/t/effective-july-2018-google-s-chrome-browser-will-mark-non-https-sites-as-not-secure/18597
I know this is an old post but it's not fully answered. I ended up extending Satpals answer
First rule catches http + www and second one catches non-www
For some reason i could not use MapProtocol in the fist Rule but it works with https written directly into the url.
<rewrite>
<rules>
<rule name="Special case www & HTTPS off" enabled="true" stopProcessing="true">
<match url="(.*)" />
<conditions logicalGrouping="MatchAll" trackAllCaptures="false">
<add input="{HTTP_HOST}" pattern="^www\.example\.com$" />
<add input="{HTTPS}" pattern="off" />
</conditions>
<action type="Redirect" url="https://www.example.com/{R:1}" redirectType="SeeOther" />
</rule>
<rule name="Redirect to www & HTTPS" enabled="true" stopProcessing="true">
<match url="(.*)" />
<conditions trackAllCaptures="false">
<add input="{HTTP_HOST}" pattern="^example\.com$" />
</conditions>
<action type="Redirect" url="{MapProtocol:{HTTPS}}://www.example.com/{R:1}" redirectType="SeeOther" />
</rule>
</rules>
<rewriteMaps>
<rewriteMap name="MapProtocol">
<add key="on" value="https" />
<add key="off" value="http" />
</rewriteMap>
</rewriteMaps>
</rewrite>
This worked fine for me:-
<rewrite>
<rules>
<rule name="Redirect to WWW" stopProcessing="true">
<match url=".*" />
<conditions>
<add input="{HTTP_HOST}" pattern="^myExample.in$" />
</conditions>
<action type="Redirect" url="https://www.myExample.in/{R:0}" redirectType="Permanent" />
</rule>
</rules>
</rewrite>
This post is basically for those who need to redirect non-www to www URL in windows hosting.
In web.config file as below code:
<system.webServer>
<rewrite>
<rules>
<rule name=”Redirect example.com to www.example.com HTTP” patternSyntax=”ECMAScript” stopProcessing=”true”>
<match url=”.*” />
<conditions>
<add input=”{HTTP_HOST}” pattern=”^example.com$” />
<add input=”{HTTPS}” pattern=”off” />
</conditions>
<action type=”Redirect” url=”http://www.example.com/{R:0}” redirectType=”Permanent” appendQueryString=”true”/>
</rule>
<rule name=”Redirect example.com to www.example.com HTTPS” patternSyntax=”ECMAScript” stopProcessing=”true”>
<match url=”.*” />
<conditions>
<add input=”{HTTP_HOST}” pattern=”^example.com$” />
<add input=”{HTTPS}” pattern=”on” />
</conditions>
<action type=”Redirect” url=”https://www.example.com/{R:0}” redirectType=”Permanent” appendQueryString=”true”/>
</rule>
</rules>
</rewrite>
</system.webServer>
In the above code please note there are two rules used one for HTTP and another for HTTPS. To avoid clashing of HTTP and HTTPS in the same rule, here used two separate patterns.
I hope it works for you guys…!!
Follow the Step Below
Login to your website's cPanel
Click on Hosting Setting
Select your preferred domain as www.example.com