How to delete Solver(SOLVER.XLAM) code - excel

opening several examples of written macro's/ codes I suddenly get stuck with a code that seems to be secured. Solver (SOLVER.XLAM)
This is doiing noting and I would like to remove that from my system. I guess this is not a relavant code . Can anybody tell me what I should do? I already installed something to remove passwords but the SOLVER is still asking for passwords and I can not get rid of it!

Solver is Excel add-in. If you want to remove it go to Excel Application > Options > Search for add-ins > Press something like 'go to' button > un-check Solver on the list (I can't give you exact path as I have Polish version of Excel).
It's better not to try to open Solver's VBA code as it is rather copyright protected.
Moreover, I don't think Solver makes any inconveniences when working with Excel or VBA.

verry nice, now it is not more active. For the one who want to deactivate this you should follow the next steps. For Excell 2010. Open Excell/go to options/ go to add ins/ go to active add ins on top of the page / select the SOLVER / press start (down the page)/ then a window will pop up so that you can uncheck or check it as you require. That was verry easy to do. Thank you Kaz for pointing me to the right direction! It is better to not delete them, maybe you will need them later

Related

How Do I Save the Right Version of My Excel File with Save Lockout Active?

I think I have my Excel VBA where I want it (checking for cell completion before allowing saving) but that also means I can't save the blank version of that form for distribution. I'm probably missing something obvious but...I guess, disabling the macros and then reenabling it would work but apparently I can't figure it out. I've tried googling it but I only get system-wide toggling.
So, just to put a bow on things. The correct way to deal with this is to go through the formal file opening process in Excel. Assuming you have the proper macro setting in Excel (disable macros with prompt), if you open Excel, Use File Open (DO NOT SELECT RECENT FILES) and browse to the file, select it and open. Then you should get the standard prompt even if you've enabled it for that file in the past.

Excel 2007-VBA, Right Click Buttons

I am having a strange Excel 2007 issue, and I am not quite sure how to explain this. So bear with me please....
I have created a few right click buttons to call various backend VBA functions that I have written. They were working fine earlier today, and now for some reason, a button is appearing that is not from the code in my worksheet. When you click it, it is attempting to open another worksheet and execute code from it. The two files are not in the same directory nor are they named anything similar. I deleted the file that the button is trying to execute from and now it just simply gives me an error 400.
So, I couldn’t figure that out, and have since deleted every single scrap of code in the backend of this file, and the button still appears. Any ideas what could be causing this? It seems like maybe its mixing files up or saving a copy somewhere in a temp directory and trying to access that instead of the actual code that is written in the VBA. Is there a cache I need to clear out or something?
I know I didn’t exactly do a great job describing this, so I will be more than happy to provide any and all other details that you may need. Just let me know what is going on.
EDIT #1 -- New Information ==
I can even open a new, completely blank excel file and the right click button is still there.
EDIT #2 -- Tried Diagnostics ==
I just tried running the Excel diagnostics and it found no problems. It is strange, it is like this macro has somehow became global or stored in some type of cache or something.
I hope I'm understanding your issue correctly.
If you know what right-click (context) menus the button is appearing in you should be able to fix them with a Reset command. For example if it's appearing in the Cell context menu, you could try this in the VBE's Immediate window:
Application.Commandbars("Cell").Reset
This will reset the entire menu to its default state.
Also, you might be interested in a tool I wrote, MenuRighter, that allows you to tweak your right-click menus. It also has a setting to show you the Caption and ID of any context menu.

How to disable auto backspace in Excel VBA editor

When typing in the editor it puts me back on the end of the last word.
For example, I want Sub Entername()
If I'm not typing quickly enough it goes: SubEnterName().
How do I turn this off.
I've heard of this problem before. Try these steps:
Close down excel.
Open it first it in safe mode (type "excel.exe /s" in the run box).
Open the VBA Editor and attempt to write a macro. The issue should not occur
Close down excel and re open it normally
I've heard these steps have fixed this issue before for others.
Are you using any VBE addins like Smart Indenter or Code Cleaner? Remove Code Cleaner and install it only when you are going to use it, then uninstall it when you are done. I had the same problem and Code Cleaner was the culprit. I believe it might be the two of them together that causes it.
For reference:
VBA Code Cleaner
Smart Indenter
This issue is because of a COM Add-In called 'Load Test Report Addin'. to disable it, do the following:
go to Excel Options -> Add-Ins and choose Excel COM Add-ins from bottom drop down and press Go... button. then uncheck the 'Load Test Report Addin' item to diable it. this will clear the problem!
To prevent auto refreshing and deleting back-spaces in VBA editor, you should make sure that all forms or reports that have On-Timer Event Procedures are in design view or the code should be turned-off (i.e. converted into comments).
However, it is better to make sure that all forms and reports are in design view which means none of the On-Timer codes are executing.
I hope this helps.
Shafiu.
Do you have AutoSave turned on? I had a file doing this just now. While typing, as SOON as I stopped, AutoSave was working away - (inadvertently, I'm sure) this was causing VBE to kill spaces.
Did two tests:
-Moved the file off Sharepoint onto my local machine, worked fine
-Turned off AutoSave on the Sharepoint copy, worked fine

Disable the VBA code editor window in Excel 2010

I am looking for a possibility to add an additional level of security to my Excel projects.
We have multiple users. Some who know (and are meant to) the password that unlocks the VBA macros. Others are not meant to be able to access these.
I'm not sure if someone has the password that shouldn't (changing the password hasn't stopped tampering) so i would like to disable the VBA editing window for any user not approved. I can't find any way to do this though, is it possible?
I can't disable the save option as all users need to save data.
I have tried to disable the ribbon icons etc, but with no sucess. It is still possible to open the code window with Alt+F11.
Any help would be great.
I am coming from Excel 2003, but this concept should work for you as well. You could think of
trapping the Alt-F11 key (Application.OnKey "%{F11}" "MyNullSub") plus
disable the relevant menu entries (Application.CommandBars(...).FindControl(ID:=..).OnAction = "MyNullSub")
with
Sub MyNullSub()
' do nothing
End Sub
as a dependency of an entry in the registry that needs to be present (GetSetting(...)), but this will only help until this additional secret is spread around in the same way the (changed) passwords apparently did.

VBA editor auto-deletes spaces at the ends of lines

Is there a way to convince the VBA editor in Excel to stop auto-formatting lines to remove the space at the end when I pause in my typing for a quarter second?
I had this exact problem and the following worked for me.
Click the Microsoft Office Button, and then click Excel Options
Click the Add-Ins category
In the Manage box, click COM Add-ins, and then click Go.
Look for an add in called 'Load Test Report AddIn' then uncheck it
restart excel
This addin is installed with VS2010 Beta2
In Excel 2010, toggling Design Mode button on the Developer Ribbon Tab solves the problem for me.
I've definitely had that issue before, where the vba editor would format as I was typing (not just when I went to another line). For me, it seemed to be related to a Microsoft Web Browser control that I had in an open workbook. When I took out the web browser, the VBA editor started acting normally again. I have no idea why that worked, but it did. Now I avoid using that control in my workbooks.
Something is causing your spreadsheet to recalculate while you are in the VBA Editor and this 'compiles' your code and thus strips the spaces. You need to stop the cells recalculating while you are editing. Turning the calculation to manual in the spreadsheet.
Tools > Options > Calculation should do the trick.
I noticed this when I had cells recalculating thanks to a DDE connection.
There is sort of a way to turn off the auto-"correction" in the VBA Editor.
Tools Menu -> Options -> Editor Tab -> Clear the Auto Syntax Check box
Sadly, this won't solve all your problems, as the VBA Editor tends to have a mind of its own, for better or worse.
Taking it out of design mode fixes it every-time on vba2003 - its was driving me crazy at first ... i did notice it might have something to do with the web control but when i take it out of design mode it works fine ... just toggle that to get it to behave :)
I have had this same problem several times recently, and has driven me crazy.
After reading this post all the different fix-ups mentioned (none worked for me), I recalled I have been playing lately with Internet Explorer Control, opening Internet Explorer from VBA.
This is mentioned in some of the answers in this post.
This got me in the right path and, in order to fix it, I had to first delete all iexplore.exe instances (alt+control+delete), closed Excel and open excel again.
(iexplore.exe had been opened invisible from the VBA code, and I didn't know they were running)
That fixed the bug.
I have been programming quite heavily with VBA for over 4 years, and never had this problem.
Just a couple of weeks ago I started using IE control, and I started getting this problem...so in my case I can only assume the bug is directly related to the IE control.
I am running both excel 2003 and 2007 in same PC at the same time, and the problem only happens with excel 2007.
None of the above for me.
I had a Application.OnTime timer that fired every second and this triggered a recalculation of something: commenting it made my day.
This has started happening to me recently after adding a Timer event to an Access 2007 form. The VB editor "finalizes" the current line (as if you had moved the cursor off of the statement; I have auto syntax checking off) each time the event fires (initially I had it set to 1 second, now it is set to 5 seconds, and the behavior scales accordingly). In order for the event code to execute, the application has to ensure that it has been compiled. Presumably, the editor needs to be in a "sane" state to do this, as it probably has to check for code dependencies among modules. Note that the behavior occurs regardless of whether any dependent code is actually loaded into the editor at the time. Note also that resetting the execution state doesn't affect the timer event firing. As a practical matter, one could close the triggering form, switch it to design view, set a breakpoint in the triggered code, or increase the timer interval while working with the editor.
In contrast to abhishek's comment, changing the settings of Tools/Options.../General/Compile On Demand and/or Background Compile did not affect the issue.
If it helps, none of the previous answers solved mine. Only solution appeared to be to close the xls file and reopen it. Frustrating to have to do every 30 mins but at least it works. Would love to know why it's recompiling and cleaning the text... should really be an option to disable the text cleanup but couldn't find it.
Turn off Tools > Options > General > Background Compile. This solved it for me.
This is a long standing problem that could have various causes. I had this same issue occur in the Access VBE (so naturally the Excel answers weren't relevant). After a LOT of digging I finally got it fixed with the solution below. First a recap though:
If you are here because of this issue in Excel, try the solutions above first. To summarize:
The most common issue in Excel is that the Design button is toggled. Toggle that and see if the behavior changes as submitted by Dmitry Frenkel above
If that doesn't work, check for the "Load Test Report" AddIn as mentioned by Ade.
Those are really the two main causes in Excel, but if neither of those solutions work, then scroll through the rest of the solutions here. All are valid possibilities for the cause. In Access the cause is pretty straight forward. It's a timer issue on a form somewhere. I found this solution from here by User Kevin K. Sullivan.
Copy the following line of code onto the clipboard. (You might need to
paste it into a text editor first and coerce it onto one line, depending on
your newsreader. It must be one line.)
For i = 0 to Forms.Count -1: Debug.Print Forms(i).Name, Forms(i).TimerInterval: Next i
Switch to Access.
Press Ctrl-G to go to the Immediate Window.
Press Ctrl-V to paste in the code.
Press enter to to run the code. All open forms will be listed. Any non-zero timer intervals are your culprits. Simply close that form (It may be invisibly open from another process than the one you thought you were dealing with).
I think the solution for Access here is what the user Dom was trying to say above. I guess the down votes were because it wasn't explained very well and/or because he was speaking of Access when the OG issue was in Excel. Regardless, he is likely on point if you are here because of the VBE in Access.
I hope this helps people. I know I kept finding this page when researching this issue, so that's why I thought I'd update this solution here.
I hit this problem today on a fresh install of Excel 2010 Beta 2. None of the above made any difference, but going into the trust center and disabling all application add-ins fixed the problem for me.
I have Office 2010 Pro and I had the same issue. As I type the space between each word was being deleted. After trying each of the options turning them on and off the only way I found working was to disable the Winzip Courie(excel) add-in. This is done thru the Options dialog box Add-Ins section.
In office 365 I had the same issue - what worked for me is I saved the file with a different name and when I re-opened the new file the problem went away.
I found this issue pops up when I had AutoSave on. Turning that off let me code without it compiling every second.
I don't think I've ever seen the VBE remove a space when I've stopped typing. It will remove trailling spaces from lines if you move to another line, but that's something different and not behaviour that I think can be altered.
The removal of spaces in the VBA editor for Access occurs when a form is open in Form("Execute") mode. This is probably due to background executions based on "On Timer" methods. Close the form in Access solves the problem in VBA.

Resources