I would like to create an Excel Tool that would act as a Monitoring Tool for our agents on the floor.
Right now we don't have an exclusive WFM tool that would monitor and call out agents with their activities and productivity, the only thing we have is a dashboard to view all agents status and the durations of their status or calls. This is a web-based viewer of our dialer that would only shows agents with their current status but they won't trigger or notify if an agent is going over our set thresholds for their wrap up time, over breaks or lunch.
Currently, I have an existing excel file that would look up values from another sheet to populate the table with information that I need such as the name of agent, their current status and current duration of the call.
The another sheet I've mentioned above is a blank sheet where I would simply paste all the data from the webpage of our dialer. So basically I am just doing copy-paste method where I am selecting all the contents from this webpage which is our dialer and pasting it in on the blank excel sheet that I created and the table that I made will find all the values that I setup from that blank sheet.
I really don't have enough knowledge but I still tried Data>Get Data>From Web and I am not getting anything.
I tried pasting the web link, but I don't seem to pull up any data.
I know as I've mentioned, I don't really have enough knowledge and maybe I need some basics doing this method.
What I would like to happen is if there's a way to link a webpage, sync its data to an excel sheet and is it possible to make it real-time so that way I can have an improvised WFM Tool that would help me monitor our agents activities?
Thank you in advanced!
Getting data from the Internet through a standard mechanism (Data >Get Data > From Web) is not always successful. Excel can recognize tables on a web page, but not always in the way that the human eye recognizes them.
Actually, there are two options here:
write a macro that parses specifically those pages from which you are currently getting data manually (“…I am just doing copy-paste method…”).
prepare web pages so that data from them can be automatically downloaded via Data >Get Data>From Web via standard Excel functionality.
Both require programming specifically for your task.
For example, I could write a parser, but for this I need access to the web page from which you are copying and pasting.
Or the programmer who wrote the web page can create new pages with the same data, but in a format that Excel understands. But this programmer needs to specify exactly how to design web pages.
I have no previous experience in Access, VBA coding or in Excel macros prior to teaching myself the past month via these forums. Thank you forums and contributors. I have enjoyed my Access learnings so far, the challenge that it has provided and appreciate any help that I can get. As such, the code and methods that I have used to this point may well be convoluted and confusing. I will do my best to provide relevant details and accurate terminology.
I work in a lab and I am creating an Access Form for semi-automated reporting. Samples are received from clients and are logged into the Excel Table R&D Log. The worksheet is InProcess. Samples are sorted based on the site in which they originate and given a one or two letter site code (G, D, WH, etc.) and an ID "yy-000" in separate Excel columns (i.e. D 18-096). Samples may be submitted for multiple analyses (Metals, Water, Soil, etc.) and may even have multiple rows of reporting if multiple analytes are identified in the sample. There are several other columns, such as receipt date, reporting date, units, etc. Once samples are reported, I manually copy and paste them into the Archived worksheet, and delete the record and blank row from the InProcess worksheet. Since one sample may have multiple analyses and even more potential results, each record would be reported on a new Excel row (with the same D 18-096 ID number). Thus, there is not a single unique identifier or primary key for each sample in the current format. R&D Log is updated manually by lab technicians and the worksheet InProcess is a linked table in an Access Database.
The Access Database is using two combo boxes on a Form frmInProcess to filter a Query qryInProcess of the linked table. The combo boxes are filtering the report destination (one client may receive multiple site codes) and the analysis (reports are separated based on type of analysis). The Query is also filtering out blank results and blank dates, so only completed samples will appear on the filtered Form. I have generated VBA code to this point that will export the Form to a .pdf, save the file with unique filename, and open outlook to mail out the report. I have also managed to export the filtered Form frmInProcess to an Excel file Access Test (not the linked file).
What I would like to do now is to automate the transfer of completed test results from the Excel worksheet R&D Log: InProcess to R&D Log: Archived and delete the record from the InProcess worksheet. I am not sure if I can export the filtered Form into a linked Excel table, or if I must use a separate Excel file (or if it even matters for simplicity of code?). I would now like to read the exported filtered Form in Excel Access Test, lookup matching rows in R&D Log based on several criteria (site, ID, Analysis, Analyte, Report Date) and automate the transfer of records between R&D Log worksheets. End result being that Access generates reports for completed tests, and the records are removed from InProcess testing and transferred to Archived testing in Excel. I am guessing that I may need to close the Access application and perform this in Excel. Hope this is easy enough to follow.
Thank you.
In my experience, importing an Excel document into a temporary NEW (or totally empty) Access table is usually the easiest way to go. Then you do not have to worry about cell references like you do in Excel VBA. Even if the Excel document has old data in it with just a few new changes each time, importing it into a temporary Access table could be the simplest way to go, because then you can compare the data in this table with the data in another, permanent Access table and update the latter based on the former.
As far as the original Excel file, if you need to delete rows there, it might be quicker to export a new Excel file with just the data the old one is supposed to end up with, and then use VBA to delete (or - safer! - rename) the old file.
So the development process goes something like this:
Save import steps by first importing an Excel file via Access' ribbon options "External Data" (tab) ->"Excel" and when you finish, be sure to check the "Save import steps" box and note the name you give the "saved import" because you will need that in your VBA code.
In Access, write a function for deleting the table. The VBA code is:
Const cTable = "MyExcelTempTable"
If TableExists(cTable) Then
DoCmd.DeleteObject acTable, cTable
End If
Now you can test your delete function on the data you imported.
Write VBA code to import the same spreadsheet to create the same table:
Const cSavedImport = "Import-MyExcelTempTable"
' Import the Excel file
DoCmd.RunSavedImportExport cSavedImport
Write more VBA function(s) to check the imported table for bad data and then to copy it into the permanent table. You might be updating existing records or adding new ones. Either way, you could use Access queries or SQL to do this and run them from VBA.
Write a VBA function to rename the old Excel file. (You could use an InputBox if the Excel file name is different each time. I do this for importing Excel files, and I set a default value so I do not have to type as much.)
Write a VBA function to export the new version of the Excel file.
Make yourself a button on a form that, when clicked, runs a VBA function. Inside that function, run Steps 2 through 6, above.
I am not sure my answer exactly matches what you are trying to do, but hopefully you get enough of a picture of the workflow to figure out the details of what you need.
We are using a access front end that is being developed externally. It displays a form that contains numerous points of data and a few subforms.
I am trying to code a excel sheet that would pull data from various places in the currently open form.
I have gotten as far as to be able to access all the points of data in the main form and the first line in the subforms using the following code (In this example, the "pnum", is the left most field displayed in the subform):
Set objacc = GetObject("xxxxx\Database.accdb").Application
Debug.Print objacc.Forms("mainform").Controls("main subform").Controls("Pnumber")
This works and gets me the value of the very first element named "Pnumber" in the main subform.
However, the way the subform is formulated, it can have anywhere between 1 and 30+ "Pnumber" fields.
I need a way to pull everything that the currently visible (filtered down) subform contains regardless of how many lines there are.
Thanks!
If I were the developer of that Access application, and you asked me for this feature, I would code an API for you to automate getting the right data.
One approach I can think of in this particular case would be to populate some temporary tables, on request from Excel VBA, and have Excel use the Access database file as an external source of data. Or Access could be coded to push the right data into the open Excel worksheet.
The way you would get access to the data in its current state in the form (filtered, sorted, etc.) would probably be best through the RecordsetClone property of that (sub)form. At least that's what I imagine I would use to implement that feature.
I have created a data template report(xdodtexe) and the output will be in excel with multiple spread sheets. My E-Business Suite version is r12.1.3 and I am using Office 2013.
I have created an rtf and in two separate pages layouts are there. For example department in page and employees in page. I am using <?spreadsheet-sheet-name: department?> for naming the sheets but the sheet name comes as "fndwrr" and both the outputs are in the same excel sheet without splitting into two different sheets.
I have also used <?split-by-page-break:?> for splitting into two sheets but this also does not work.
Hello there fellow "BI Publisher self-torturer" :-),
First of all, I would suggest you go over this document here, as the best method of manipulating XLS outputs is by using Excel templates.
Second of all - it would have been great if you supply a sample of the xml data + a sample of the template code as you have it.
Btw, the split-by-page-break that you're trying is for other output formats, such as PDF, RTF etc. which follow a paging rule, unlike XLS.
This being said - I am pretty sure you can't do that using an RTF template.
Also, you should mention the version of the XDO Engine/BI Publisher, because Excel templates are available since version 11.1.15 of BI Publisher.
Pay special attention to the following section Table 3-2 Column Entries, as you would need to put the XDO_SHEET_? and XDO_SHEET_NAME_?, the first being the split/group criteria and the second the actual name of the sheet.
Cheers
This question is long winded because I have been updating the question over a very long time trying to get SSIS to properly export Excel data. I managed to solve this issue, although not correctly. Aside from someone providing a correct answer, the solution listed in this question is not terrible.
The only answer I found was to create a single row named range wide enough for my columns. In the named range put sample data and hide it. SSIS appends the data and reads metadata from the single row (that is close enough for it to drop stuff in it). The data takes the format of the hidden single row. This allows headers, etc.
WOW what a pain in the butt. It will take over 450 days of exports to recover the time lost. However, I still love SSIS and will continue to use it because it is still way better than Filemaker LOL. My next attempt will be doing the same thing in the report server.
Original question notes:
If you are in Sql Server Integrations Services designer and want to export data to an Excel file starting on something other than the first line, lets say the forth line, how do you specify this?
I tried going in to the Excel Destination of the Data Flow, changed the AccessMode to OpenRowSet from Variable, then set the variable to "YPlatters$A4:I20000" This fails saying it cannot find the sheet. The sheet is called YPlatters.
I thought you could specify (Sheet$)(Starting Cell):(Ending Cell)?
Update
Apparently in Excel you can select a set of cells and name them with the name box. This allows you to select the name instead of the sheet without the $ dollar sign. Oddly enough, whatever the range you specify, it appends the data to the next row after the range. Oddly, as you add data, it increases the named selection's row count.
Another odd thing is the data takes the format of the last line of the range specified. My header rows are bold. If I specify a range that ends with the header row, the data appends to the row below, and makes all the entries bold. if you specify one row lower, it puts a blank line between the header row and the data, but the data is not bold.
Another update
No matter what I try, SSIS samples the "first row" of the file and sets the metadata according to what it finds. However, if you have sample data that has a value of zero but is formatted as the first row, it treats that column as text and inserts numeric values with a single quote in front ('123.34). I also tried headers that do not reflect the data types of the columns. I tried changing the metadata of the Excel destination, but it always changes it back when I run the project, then fails saying it will truncate data. If I tell it to ignore errors, it imports everything except that column.
Several days of several hours a piece later...
Another update
I tried every combination. A mostly working example is to create the named range starting with the column headers. Format your column headers as you want the data to look as the data takes on this format. In my example, these exist from A4 to E4, which is my defined range. SSIS appends to the row after the defined range, so defining A4 to E68 appends the rows starting at A69. You define the Connection as having the first row contains the field names. It takes on the metadata of the header row, oddly, not the second row, and it guesses at the data type, not the formatted data type of the column, i.e., headers are text, so all my metadata is text. If your headers are bold, so is all of your data.
I even tried making a sample data row without success... I don't think anyone actually uses Excel with the default MS SSIS export.
If you could define the "insert range" (A5 to E5) with no header row and format those columns (currency, not bold, etc.) without it skipping a row in Excel, this would be very helpful. From what I gather, noone uses SSIS to export Excel without a third party connection manager.
Any ideas on how to set this up properly so that data is formatted correctly, i.e., the metadata read from Excel is proper to the real data, and formatting inherits from the first row of data, not the headers in Excel?
One last update (July 17, 2009)
I got this to work very well. One thing I added to Excel was the IMEX=1 in the Excel connection string: "Excel 8.0;HDR=Yes;IMEX=1". This forces Excel (I think) to look at all rows to see what kind of data is in it. Generally, this does not drop information, say for instance if you have a zip code then about 9 rows down you have a zip+4, Excel without this blanks that field entirely without error. With IMEX=1, it recognizes that Zip is actually a character field instead of numeric.
And of course, one more update (August 27, 2009)
The IMEX=1 will succeed importing data with missing contents in the first 8 rows, but it will fail exporting data where no data exists. So, have it on your import connection string, but not your export Excel connection string.
I have to say, after so much fiddling, it works pretty well.
P.S. If you are using a x64 bit version, make sure you call the DTExec from C:\Program Files\Microsoft SQL Server\90\DTS.x86\Binn. It will load the 32 bit Excel driver and work fine.
Would it be easier to create the Excel Workbook in a script task, then just pick it up later in the flow?
The engine part of SSIS is good but the integration with Excel is awful
"Using SSIS in conjunction with Excel is like having hot tar funnelled up your iHole in a road cone"
Dr. Zim, I believe you were the one that originally brought up this question. I totally feel your pain. I love SSIS overall, but I absolutely hate the limited tools that come standard for Excel. All I want to do is Bold the Heading or Row1 record in Excel, and not bold the following records. I have not found a great way to do that; granted I am approaching this with no script tasks or custom extensions, but you would think something this simple would be a standard option. Looks like I may be forced to research and program up something fancy for a task that should be so fundamental. I've already spent a rediculous amount of time on this myself. Does anyone know if you can use Excel XML with Excel versions: 2000/XP/2003? Thanks.
This is an old thread but what about using a flat file connection and writing the data out as a formatted html document. Set the mime type in the page header to "application/excel". When you send the document as an attachment and the recipient opens the attachment, it will open a browser session but should pop Excel up over the top of it with the data formatted according to the style (CSS) specified in the page.
Can you have SSIS write the data to an Excel sheet starting at A1, then create another sheet, formatted as you like, that refers to the other sheet at A1, but displays it as A4? That is, on the "pretty" sheet, A4 would refer to A1 on the SSIS sheet.
This would allow SSIS to do what it's good for (manipulate table-based data), but allow the Excel to be formatted or manipulated however you'd like.
When excel is the destination in SSIS, or the target export type in SSRS, you do not have much control over formatting and specifying how you want the final file to be. I have written a custom excel rendering engine for SSRS once, as my client was so strict about the format of final Excel report generated. I used 'Excel xml' to get the job done inside my custom renderer. May be you can use XML output and convert it to Excel XML using XSLT.
I understand you would rather not use a script component so perhaps you could create your own custom task using the code that a script contains so that others can use this in the future. Check here for an example.
If this seems feasible the solution I used was CarlosAg Excel Xml Writer Library. With this you can create code which is similar to using the Interop library but produces excel in xml format. This avoids using the Interop object which can sometimes lead to excel processes hanging around.
Instead of using a roundabout way to do this exercise of trying to write data to particular cell(s), format the cell(s), style them which is indeed a very tedius effort considering the support SSIS has for EXCEL, we could go the "template" way to do this.
assume we need to write data in the so & so cell with all the custom formating thats done on it. Have all the formatting in a sheet, say "SheetActual", Whereas the cells that will hold the data will actually have Lookups/ refrences/ Formulaes to refer to the original data that SSIS exports in a hidden sheet say "SheetMasterHidden" of the same Excel connection. This "SheetMasterHidden" will essentially hold the master data in default format that SSIS writes data to the excel. This way you need not worry about formatting the data runtime.
Formatting the Excel is a one time work "IF" the formatting dont change very often. If the format changes and the format is decided runtime this solution maynot go very well.
The answer is in the question. Over time, it became a progress status. However, there is SSRS that will create Excel files if you create TABLE presentations. It works pretty well too.