I tried to use the SharePoint Guidance library and i got this error.
Someone has a answer or propositions?
Thanks
Error is :
One or more error occurred while writing messages into the log.\r\nThe error while writing to the EventLog was:An exception has occurred.
ExceptionType: 'LoggingException'
ExceptionMessage: 'The Category 'Custom Error/DUET' was not found in the diagnostic categories collections.'
StackTrace: ' at Microsoft.Practices.SharePoint.Common.Logging.DiagnosticsService.GetCategory(String categoryName)
at Microsoft.Practices.SharePoint.Common.Logging.DiagnosticsService.LogTrace(String message, Int32 eventId, TraceSeverity severity, String categoryName)
at Microsoft.Practices.SharePoint.Common.Logging.TraceLogger.Trace(String message, Int32 eventId, TraceSeverity severity, String category)
at Microsoft.Practices.SharePoint.Common.Logging.SharePointLogger.WriteToDeveloperTrace(String message, Int32 eventId, TraceSeverity severity, String category)'
Source: 'Microsoft.Practices.SharePoint.Common'
TargetSite: 'Microsoft.SharePoint.Administration.SPDiagnosticsCategory GetCategory(System.String)'
\r\n Orginal logged message was: An error occurred while writing tot the Trace Log, trace message:kaka Error in Constant recovery
ExceptionType: 'Exception'
ExceptionMessage: 'testing sohail'
StackTrace: ''
Source: ''
TargetSite: ''
What the others have said is correct. You will want to create and register your category when you deploy your code onto your sharepoint environment. I created my logging by doing the following:
I created a farm solution that would deploy all the logging logic on the farm
On the feature activation code, I checked to see if my logging category existed. If not, I create it
When I remove my solution, I deleted my custom category (this is optional)
Here's a link that describes how to created and register your category:
http://msmvps.com/blogs/sundar_narasiman/archive/2012/06/20/how-to-implement-logging-in-sharepoint-2010-part-2.aspx
Related
SELECT [r_MUIUserScreenRelevance].[UserID] AS [MUIUserScreenRelevance_UserID], [r_MUIUserScreenRelevance].[NodeID] AS [MUIUserScreenRelevance_NodeID], [r_MUIUserScreenRelevance].[Relevance] AS [MUIUserScreenRelevance_Relevance]
FROM [MUIUserScreenRelevance] [r_MUIUserScreenRelevance]
WHERE [r_MUIUserScreenRelevance].[UserID] = CONVERT(UNIQUEIDENTIFIER, 'b5344897-037e-4d58-b5c3-1bdfd0f47bf9') AND ( [r_MUIUserScreenRelevance].[CompanyID] = 2)
ORDER BY [r_MUIUserScreenRelevance].[UserID], [r_MUIUserScreenRelevance].[NodeID] OPTION(OPTIMIZE FOR UNKNOWN)
at Serilog.Core.Logger.Write(LogEventLevel level, Exception exception, String messageTemplate, Object[] propertyValues)
at Serilog.Core.Logger.Information[T](String messageTemplate, T propertyValue)
An error has occurred during your processing. You need to review the Trace log and most likely will find the error on one of the trace items. Alternatively, switch on the Request Profiler and reprocess what you tried on the above. What changes were made that caused this - I find retracing your steps on each change made backwards will point you in the right direction.
We are encountering an error when upgraded to 2020R2, specifically from 2020R1 (Build 20.109.0032) to 2020R2 (Build 20.204.0032).
Upon successful login, the user is taken to the Default page (ScreenID = 00000000) and receives the error "Object reference not set to an instance of an object." popup message. When dismissed, the page renders its Welcome information, but the left-hand Workspaces and menu items (Finance, Sales Orders, Receivables, etc.) have disappeared, instead showing a spinning icon. Quick Search at page top offers no menu items when searched.
The user can manually enter any page (eg. ScreenID=SO301000) directly into the Address URL and reach the page content, but again initially gets the error and has no workspace menus.
There is nothing in the Trace to give clues. However, the browser's Web Console give details as shown below:
XHRGEThttp://localhost/AcumaticaERP/(W(1))/frameset/sitemap
[HTTP/1.1 500 Internal Server Error 912ms]
Message "An error has occurred."
ExceptionMessage "Object reference not set to an instance of an object."
ExceptionType "System.NullReferenceException"
StackTrace " at PX.Web.UI.Frameset.Services.AccessProvider.ApplyRestrictionsForCurrentUser(Screen screen)\r\n at PX.Web.UI.Frameset.Services.SiteMapRepository.<>c__DisplayClass21_0.<GetSiteMapImpl>b__10(Screen s)\r\n at AutoMapper.Mapper.AutoMapper.IMapper.Map(Object source, Type sourceType, Type destinationType, Action`1 opts)\r\n at AutoMapper.Mapper.AutoMapper.IMapper.Map[TDestination](Object source, Action`1 opts)\r\n at System.Linq.Enumerable.WhereSelectEnumerableIterator`2.MoveNext()\r\n at System.Li…HandleNonSuccessAndDebuggerNotification(Task task)\r\n at System.Web.Http.Filters.AuthorizationFilterAttribute.<ExecuteAuthorizationFilterAsyncCore>d__3.MoveNext()\r\n--- End of stack trace from previous location where exception was thrown ---\r\n at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()\r\n at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)\r\n at System.Web.Http.Dispatcher.HttpControllerDispatcher.<SendAsync>d__15.MoveNext()"
If I place a breakpoint in VS2019 at the beginning of Page_Init() of PageTitle.ascx.cs, the error occurs first, then the breakpoint is reached:
protected void Page_Init(object sender, EventArgs e)
{
var lifetimeScope = this.Context.GetLifetimeScope(); <-- set a breakpoint here
if (lifetimeScope != null)
{
screenRepository = lifetimeScope.Resolve<IScreenRepository>();
}
else
....
A similar upgrade of a demo website and database with Sales Demo data works just fine.
We conducted a SQL Schema Compare of the two databases and opted to Update the differences, which were all examples of moving away from the NoteID column allowing NULL in many tables.
The schemas are now the same, the website upgrades are the same, so now I suspect it is the data... somewhere... causing a lack of workspace and menus.
The call to PX.Web.UI.Frameset.Services.AccessProvider.ApplyRestrictionsForCurrentUser() seems to be the issue but is data-related in my case. It's as if AccessProvider of screenRepository isn't available yet in a different control upstream from use of PageTitle.ascx?
Where can I look next to try to resolve?
Thank you.
SharePoint 2013 search crawls getting stuck for one content source with index count around 300K. When I kick off crawls the success count grows pretty steadily and performance is not an issue. The small content source with 5-7K index would finish fine. This is started recently. The problem I suspect is, search process never commits the transaction. Here is the ULS error.
mssearch.exe (0x0FA8) 0x39D0 SharePoint Server Search Crawler:Gatherer Plugin ac6s7 High ManagedSqlSession caught a SqlException executing the following command: 'proc_MSS_CommitTransactions'. Connection string was: 'Data Source=XXXXX;Initial Catalog=SSA_CrawlStoreDB;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name=SharePoint[OWSTIMER][1][SSA_CrawlStoreDB]' Original exception message: 'Arithmetic overflow error for data type smallint, value = 32768. Duplicate key was ignored.' Stack trace ' at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParser...
Detailed error posted on my blog
http://nitrohn.blogspot.com/2016/10/sharepoint-2013-search-crawl.html
Any ideas how to fix?
I am trying to create an Information link in Spotfire Information designer and keep getting this error. I can access the database and the validated columns as well as database. Any help is really appreciated.
` Error message: Could not open information link.
TargetInvocationException at Spotfire.Dxp.Framework:
Exception has been thrown by the target of an invocation. (HRESULT: 80131604)
Stack Trace:
at Spotfire.Dxp.Framework.ApplicationModel.ProgressService.ExecuteWithProgress(String title, String description, ProgressOperation operation)
at Spotfire.Dxp.Forms.Data.InformationDesigner.DesignerFormController.ExecuteInformationLink(CachedInformationLinkElement informationLink)
ImportException at Spotfire.Dxp.Data:
Failed to execute data source query. (HRESULT: 80131500)
Stack Trace:
at Spotfire.Dxp.Data.DataSourceConnection.ExecuteQuery2()
at Spotfire.Dxp.Data.DataFlow.Execute()
at Spotfire.Dxp.Data.DataFlow.DataFlowConnection.ExecuteQueryCore2()
at Spotfire.Dxp.Data.DataSourceConnection.ExecuteQuery2()
at Spotfire.Dxp.Data.Producers.SourceColumnProducer.<>c__DisplayClass11.<GetColumnsAndProperties>b__e()
at Spotfire.Dxp.Framework.ApplicationModel.Progress.ExecuteSubtask(String title, ProgressOperation operation)
at Spotfire.Dxp.Data.Producers.SourceColumnProducer.GetColumnsAndProperties(DataSourceConnection connection)
at Spotfire.Dxp.Data.Persistence.DataItem.PerformUpdate(SourceColumnProducer producer, DataSourceConnection connection)
at Spotfire.Dxp.Data.Persistence.DataItem.Update(SourceColumnProducer producer, DataSourceConnection connection)
at Spotfire.Dxp.Data.Persistence.DataPool.<LoadData>d__1.MoveNext()
at Spotfire.Dxp.Data.Producers.SourceColumnProducer.ConfigureAndLoadData()
at Spotfire.Dxp.Framework.DocumentModel.Node.ConfigureSubTree()
at Spotfire.Dxp.Framework.DocumentModel.Node.<ConfigureSubTree>b__10(Node node)
at Spotfire.Dxp.Framework.DocumentModel.Node.ConfigureSubTree()
at Spotfire.Dxp.Framework.DocumentModel.Node.<ConfigureSubTree>b__10(Node node)
at Spotfire.Dxp.Framework.DocumentModel.Node.ConfigureSubTree()
at Spotfire.Dxp.Framework.DocumentModel.Node.<ConfigureSubTree>b__10(Node node)
at Spotfire.Dxp.Framework.DocumentModel.State.NodeState.ForEachChild(IDocumentNodeChild[] children, Action`1 action)
at Spotfire.Dxp.Framework.DocumentModel.Node.ConfigureSubTree()
at Spotfire.Dxp.Framework.ApplicationModel.Progress.ExecuteSubtask(String title, IndeterminateProgressFormatter progressFormatter, ProgressSpeedFormatter speedFormatter, ProgressOperation operation)
at Spotfire.Dxp.Framework.DocumentModel.DocumentNode.ConfigureAndAttachFromNew()
at Spotfire.Dxp.Framework.DocumentModel.DocumentNode.AttachSubTreeWhileExecuting(UndoableNode newOwner)
at Spotfire.Dxp.Framework.DocumentModel.DocumentNode.AttachToUndoableNode(UndoableNode newOwner)
at Spotfire.Dxp.Framework.DocumentModel.UndoableKeyedCollection`2.<>c__DisplayClass6.<Insert>b__5()
at Spotfire.Dxp.Framework.DocumentModel.Node.Spotfire.Dxp.Framework.DocumentModel.INode.InternalTransaction(Executor executor)
at Spotfire.Dxp.Framework.DocumentModel.UndoableKeyedCollection`2.Insert(Int32 index, TNode item)
at Spotfire.Dxp.Data.DataTableCollection.<>c__DisplayClass11.<Add>b__10()
at Spotfire.Dxp.Framework.DocumentModel.Node.Spotfire.Dxp.Framework.DocumentModel.INode.InternalTransaction(Executor executor)
at Spotfire.Dxp.Data.DataTableCollection.Add(String dataTableName, DataSource dataSource, Boolean autoCreateFilters)
at Spotfire.Dxp.Application.PartiallyOpenedDataSource.<LoadData>d__0.MoveNext()
at Spotfire.Dxp.Application.AnalysisApplication.<OpenPartiallyOpenedDocument>d__34.MoveNext()
at Spotfire.Dxp.Application.AnalysisApplication.<OpenDataSource>d__1b.MoveNext()
at Spotfire.Dxp.Application.AnalysisApplication.ConsumePromptRequests(IEnumerable`1 prompts)
at Spotfire.Dxp.Application.AnalysisApplication.Open(DataSource source, DocumentOpenSettings settings)
at Spotfire.Dxp.Forms.Data.Import.DataSourceFactoryService.OpenDataSourceWithoutPrompting(DataSource dataSource, DocumentOpenSettings documentOpenSettings, IServiceProvider serviceProvider)
at Spotfire.Dxp.Forms.Data.Import.DataSourceFactoryService.OpenDataSource(InformationLinkDataSource dataSource, DocumentOpenSettings documentOpenSettings, IServiceProvider serviceProvider)
at Spotfire.Dxp.Forms.Data.InformationDesigner.DesignerFormController.<>c__DisplayClass2.<ExecuteInformationLink>b__0()
at Spotfire.Dxp.Forms.Application.FormsProgressService.ProgressThread.DoOperationLoop()
InformationModelException at Spotfire.Dxp.Data:
An Internal Error has occurred. com.spotfire.ws.dat.OperatorException: unexpected exception (HRESULT: 80131500)
Stack Trace:
at Spotfire.Dxp.Data.InformationModel.InternalInformationModelManager.DataStream.GetNextBlock()
at Spotfire.Dxp.Data.InformationModel.InternalInformationModelManager.DataStream.Read(Byte[] buffer, Int32 offset, Int32 count)
at Spotfire.Dxp.Internal.Utilities.SeekableStream.Read(Byte[] buffer, Int32 offset, Int32 count)
at System.IO.BinaryReader.FillBuffer(Int32 numBytes)
at System.IO.BinaryReader.ReadUInt16()
at Spotfire.Dxp.Data.Formats.Sbdf.SbdfSectionHeader.ReadSectionType(BinaryReader reader, SbdfSectionTypeId expectedType)
at Spotfire.Dxp.Data.Import.SbdfDataRowReader.DelayedInit()
at Spotfire.Dxp.Data.Import.InformationLinkDataSourceConnection.ExecuteQueryCore2()
at Spotfire.Dxp.Data.DataSourceConnection.ExecuteQuery2()
InformationModelServiceException at Spotfire.Dxp.Services:
An Internal Error has occurred. com.spotfire.ws.dat.OperatorException: unexpected exception (HRESULT: 80131509)
Stack Trace:
at Spotfire.Dxp.Services.WebServiceBase`1.InvokeService[T](ServiceMethod`1 serviceMethod, ExceptionFactoryMethod exceptionFactoryMethod)
at Spotfire.Dxp.Data.InformationModel.InternalInformationModelManager.DataStream.GetNextBlock()`
Edit the information Link and validate the data types of each column. The most common scenario is a DATE column being set as a LongInteger in Spotfire.
Do you have an access to the database logs as it could be helpful here I think. There is a similar post with resolution based on modification of permissions. Spotfire accessed the db via a user that might not have permissions to db and I am not talking about the db user you provided and verified but more about a .NET user used by Spotfire.
What version of Spotfire are you running?
If you have access to the Spotfire logs, you should have a server.log and a sql.log.
You should be able to identify the exact query that Spotfire is executing within the sql.log - since it failed it should appear with your user id, information link name and it should be noted as cancelled.
The exact database error should be in the server.log with a timestamp that corresponds to the sql.log cancelled timestamp.
I’ve run a fairly complex list through SharePoint Solution Generator 2008 and have set it up as a WSPBuilder feature. The list definition project deploys and activates fine but when I try to create a list from it through the GUI it immediately takes me to an error page which has the following text:
Exception from HRESULT: 0x81070909 at Microsoft.SharePoint.Library.SPRequestInternalClass.CreateListFromFormPost(String bstrUrl, String& pbstrGuid, String& pbstrNextUrl) at Microsoft.SharePoint.Library.SPRequest.CreateListFromFormPost(String bstrUrl, String& pbstrGuid, String& pbstrNextUrl)
And the log file contains the following messages:
Creating list "GroupTaskList" in web "http://sharepoint2007:102" at URL "Lists/", (setuppath: "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\Template\Features\ GroupTaskListDefinition\GroupTaskList")
Creating List "GroupTaskList" for web "http://sharepoint2007:102", Feature 33b16b15-5b5c-4286-bc30-566d99d80861, Template Id 111116.
Standard 'verbose' messages
Cannot find a url for for quick launch element id 0, setting as ""
90009: Web http://sharepoint2007:102 is busy. Please try again.
Unknown SPRequest error occurred. More information: 0x81070909
Application error when access /_layouts/new.aspx, Error=Exception from HRESULT: 0x81070909 at Microsoft.SharePoint.Library.SPRequestInternalClass.CreateListFromFormPost(String bstrUrl, String& pbstrGuid, String& pbstrNextUrl) at Microsoft.SharePoint.Library.SPRequest.CreateListFromFormPost(String bstrUrl, String& pbstrGuid, String& pbstrNextUrl)
More standard 'verbose' messages
The list does get created correctly but it does not have a valid URL associated to it and never shows up on the quick launch menu so I have to manually browse to http:--sharepoint2007:102/Lists/TheNameIGaveIt. I believe the node in the schema.xml is correct because it’s being created and I have a QuickLaunchUrl tag which one of the errors is referring to as missing. That is the first major error in the log when I instantiate the list so I’m trying to find a solution to it and hopefully the others after it will go away.
<List QuickLaunchUrl="Lists/GroupTaskList" Name="GroupTaskList_FromTemplate" Title=" GroupTaskList_FromTemplate " Description=" GroupTaskList_FromTemplate Description" Direction="0" BaseType="0" Url="Lists/GroupTaskList_FromTemplate" VersioningEnabled="TRUE" MajorVersionLimit="0" MajorWithMinorVersionsLimit="0" FolderCreation="FALSE" EnableContentTypes="TRUE" Type="111116" Id="3fa08ec0-4772-4ab3-825c-00e1c335b31e" xmlns="http://schemas.microsoft.com/sharepoint/">
I can’t find any references to the errors in the log file on the net, has anyone run into this problem when instantiating a list definition in SharePoint 2007?
Thanks in advance, Dan
Just a guess but you could try removing the spaces in:
Title=" GroupTaskList_FromTemplate "
and
Description=" GroupTaskList_FromTemplate Description"
Have you tried that? The leading spaces may be throwing it off.
Also, look at the path in log file pointing to your feature ("\Template\Featueres\ GroupTaskListDefinition"). You've got a space in your path before " GroupTaskListDefinition".
Good Luck