I am trying to configure and instance of http://waveinabox.net/ . I have been facing an error while installing wave box in linux server
operating system : Ubuntu 12.04.1 LTS
I have used commands from this site : http://www.waveprotocol.org/wave-in-a-box/setting-up
$sudo apt-get install mercurial ant default-jdk mongodb eclipse
$mkdir wave-development
$cd wave-development
Problem starts when I type this line
$hg clone https://wave-protocol.googlecode.com/hg/ wave-protocol
I am getting error (error is: No command clone found )
I am not used to linux commands much, can anybody tell me what could be the issue. thanks in advance
you need to install mercurial - sudo apt-get install mercurial
after installing try it.
Related
I am trying to a simple command sudo yum install SDL2. I know that this package exists as per the SDL website:
Red Hat-based systems (including Fedora) can simply do "sudo yum install SDL2" to get the library installed system-wide, or "sudo yum install SDL2-devel" to get headers and other build requirements ready for compiling your own SDL programs.
However, when I try to execute my command, I get the following:
Setting up Install Process
No package SDL2 available.
Error: Nothing to do
I am using Red Hat Enterprise Linux Server release 5.3 (Tikanga). How can I go about getting yum to locate this package?
ONLY SDL is available on redhat 5.3
uname -r
2.6.32-573.12.1.el6.centos.plus.x86_64
yum search sdl-devel --verbose
SDL-devel.x86_64 : Files needed to develop Simple DirectMedia Layer applications
Repo : base
With Fedora 26, SDL2 is available in repo fedora
uname -r
4.11.0-2.fc26.x86_64
dnf --disablerepo="*" --enablerepo="fedora" search sdl2-devel --verbose
SDL2-devel.x86_64 : Files needed to develop Simple DirectMedia Layer applications
Repo : fedora
I trying to install VirtualBox on Ubuntu 14.04. I've installed VirtualBox from Ubuntu repository:
sudo apt-get install virtualbox
Then I added my user to vboxusers:
sudo usermod -G vboxusers -a user
I also installed an extrapack for my vb vsion:
wget http://download.virtualbox.org/virtualbox/5.0.10/Oracle_VM_VirtualBox_Extension_Pack-4.3.36-105129.vbox-extpack
sudo vboxmanage extpack install Oracle_VM_VirtualBox_Extension_Pack-5.0.10-104061.vbox-extpack
But when I trying to start vm, I get an error:
RTR3InitEx failed with rc=-1912 (rc=-1912)The VirtualBox kernel modules do not match this version of VirtualBox. The installation of VirtualBox was apparently not successful. Executing '/etc/init.d/vboxdrv setup'may correct this. Make sure that you do not mix the OSE version and the PUEL version of VirtualBox.
where: supR3HardenedMainInitRuntime
what: 4
VERR_VM_DRIVER_VERSION_MISMATCH (-1912) - The installed support driver doesn't match the version of the user.
And I have no /etc/init.d/vboxdrv file.
How can I fix this problem?
I've removed all the virualbox packages:
sudo apt-get purge 'virtualbox*'
Then I've installed virtualbox v.5
sudo apt-get install virtualbox-5.0
After that I've enabled virtualization in BIOS.
Now it works.
Check what version of virtualbox you installed
dpkg --list 'virtualbox*'
may be it's not aligned with the Extension pack.
Remove your installation
sudo apt-get autoremove 'virtualbox*'
Don't install fron Ubuntu repositories but run a fresh installation following the instuctions from official Oracle Virtualbox Download page about Debian-based Linux distributions.
Check that Virtualbox is running before installing the Extension pack.
I had the same error starting a vm client in ubuntu 16.4 .
Coincidentally I noticed in the file /var/crash/_usr_lib_virtualbox_VirtualBox.0.crash the following message:
Title: VirtualBox crashed with SIGABRT in QMessageLogger::fatal()
UnreportableReason: Sie haben einige veraltete Paketversionen
installiert. Bitte aktualisieren Sie die folgenen Pakete und prüfen
Sie, ob das Problem danach noch auftritt:
virtualbox-dkms
Translated: You have some outdated package versions installed. Please update the following packages and check, if the problem still occurs after that:
After the command:
sudo apt-get install --only-upgrade virtualbox-dkms
all was OK :)
I am trying to take a gui session of a centos machine on my linux machine. I am receiving the following error:
Just type the following command :
yum install xorg-x11-xauth xterm
It will work.
I'm trying to configure powertop-2.5 but when I run ./configure I get a "configure: error: libnl and libnl-genl are required but were not found" error
I've run
sudo apt-get install libtool autoconf libnl-dev ncurses-dev pciutils-dev build-essential -y
as was recommended by these guys but I get the same error.
I ran
sudo apt-get install libnl-genl-3-dev
Which replaced the previous libnl file but I still get the config error.
According to this, powertop has (or had) problems with detecting libnl but I can't figure out how to fix it.
I'm currently running Linux username 3.2.0-4-686-pae #1 SMP Debian 3.2.51-1 i686 GNU/Linux
I see you tried libnl-dev, maybe try libnl-3-dev instead:
sudo apt-get install libnl-3-dev libnl-genl-3-dev
Probably the problem is the lack of the pkg-config application in your system (which is used to find the proper dependencies with the configure script). I just have the same problem in a fresh installed Ubuntu 14.04 system, and after installing the pkg-config package the configure script finalized successfully its work. Then I could compile and install the last version (2.6.1) of powertop.
I "solved" my problem by installing powertop-2.0 instead.
The use of pkg-config made the trick. I was able to install Powertop 2.7.
I installed Ubuntu 11.10, installed GNOME 3 (replaced Unity), installed Eclipse from the Ubuntu Software Center, installed the android sdk and ADT.
Now when I start eclipse I get a message saying:
Failed to get ADB version : Cannot run program
/home/ayush/android-sdk/platform-tools/adb":java.io.IOException:error=2,
No such file or directory
What is causing this error and how do I fix it?
The command to install IA32 libraries on Ubuntu is:
apt-get install ia32-libs
sudo dpkg --add-architecture i386
sudo apt-get update
apt-get install ia32-libs
Before that please check your ubuntu version. if you are running with 64 bits, you need to install a linux emulator, IA32 bit I thinks. Verify on Google.
after that, your ADB can run easily on ubuntu.
I'm using Fedora 17 and I got the same error as the poster:
[2013-08-29 21:44:08 - adb] Unexpected exception 'Cannot run program
"/home/el/adt-bundle-linux-x86_64-20130729/sdk/platform-tools/adb":
error=2, No such file or directory' while attempting to get adb version from
'/home/el/adt-bundle-linux-x86_64-20130729/sdk/platform-tools/adb'
I know this works if you are using Fedora 17/18 (login as root)
yum install redhat-lsb.i686
And then restart the IDE and the errors no longer show.
I had the exact same error as you had, but on my Ubuntu 12.04 LTS version.
The following avoided that error for me:
1) Install 'adb' and 'fastboot' provided by the following third-party PPA.
sudo add-apt-repository ppa:nilarimogard/webupd8
sudo apt-get update
sudo apt-get install android-tools-adb android-tools-fastboot
2) Replace the copy of 'adb' and 'fastboot' provided by the official Android SDK with those installed from the above step:
cp /usr/bin/adb <path-to-your-adt-sdk-package>/sdk/platform-tools/adb
cp /usr/bin/fastboot <path-to-your-adt-sdk-package>/sdk/platform-tools/fastboot
3) Restart(re-execute) your eclipse binary.
Full credits:
http://www.webupd8.org/2012/08/install-adb-and-fastboot-android-tools.html
They have the binaries for 12.10, 11.10 and 11.04 as well.
Don't try to install ia32-libs, this library has been obsoleted.
So, you should install these libraries:
sudo apt-get install libc6-i386 lib32stdc++6 lib32gcc1 lib32ncurses5
Cheers