I am trying to take a gui session of a centos machine on my linux machine. I am receiving the following error:
Just type the following command :
yum install xorg-x11-xauth xterm
It will work.
Related
I have a linux server (completely new, web hosting, nothing is installed into it), and want to use a "wget" command. Currently, it is not found. Kernel version 2.6.32-896.16.1.lve1.4.54.el6.x86_64
I am completely new to linux, tried to solve this issue by myself, but couldn't do it. I log in into this linux server via PuTTY via my Windows OS laptop.
wget https://www.python.org/ftp/python/3.6.6/Python-3.6.6.tgz
To get "wget" to work, I will need to install it. I guess I will need to install first "sudo" and/or "apt" and/or "apt-get". But couldn't do it. Please give me a short list of steps in which order to install them.
Given your kernel version, it looks like your Linux distribution is CentOS 6 or RHEL 6. Try installing wget with this command:
yum install wget
You must be root when you run this command.
Incase you using Debian version of Linux, use the following:
sudo apt-get install wget
From kernel version, it looks like you are using RHEL/Centos 6.
Please check -
https://centos.pkgs.org/6/centos-x86_64/wget-1.12-10.el6.x86_64.rpm.html
If the mentioned dependencies exist in your system, you can directly fire the rpm command
rpm command guide -
https://docs.fedoraproject.org/ro/Fedora_Draft_Documentation/0.1/html/RPM_Guide/ch02s03.html
If it doesn't work, you need to use yum command. (You need to configure yum command first, if not configured already)
yum install wget
To configure yum command in centos6 -
https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/6/html/deployment_guide/sec-configuring_yum_and_yum_repositories
Note - you need to be root user for above activities.
I am trying to install beanstalkd (http://kr.github.io/beanstalkd/download.html) via the Linux Terminal on a shared hosting account at Godaddy.
The previous link gives commands that should install beanstalkd on the server. I use SSH (with PuTTy) to access the Linux Terminal. I have practically tried all the commands in the previous link and am consistently obtaining errors like:
sudo apt-get install beanstalkd
error message: -bash: sudo: command not found
brew install beanstalkd
error message: -bash: brew: command not found
su -c 'rpm -Uvh http://download.fedora.redhat.com/pub/epel/5/i386/epel-release-5-3.noarch.rpm'
su -c 'yum install beanstalkd --enablerepo=epel-testing'
error message: -bash: su: command not found
yaourt -S beanstalkd
error message: -bash: yaourt: command not found
I am not even sure what bash is exactly and if it is causing the problem, or if its because I'm using an SSH connection, or if it's really because the commands don't actually exist on the server (which would be strange because when I do man sudo or man su I do in fact get the complete manual of both commands in the terminal).
QUESTION: Why am I unable to run the previous commands to install beanstalkd on the linux server? Does it have to do with me using PuTTy (ssh connection)? What could I possibly do to get beanstalkd installed? Could it be because its shared hosting with Godaddy, and I might not have full power over the linux terminal?
SERVER INFO: When running cat /proc/version I obtain my linux distribution: Red Hat 4.4.7-16. I have a shared hosting account with Godaddy with a linux server hosting my site.
You have a RedHat distro, and they use rpm+yum for package management.
I see from yum search beanstalkd on my box that I can find it, but only on EPEL.
However, you have a really old version of RedHat, so can't just install the epel-release rpm, also, there doesn't seem to be a built version for RedHat 4.
If you had at least RedHat 5 you could do:
$ sudo yum install https://dl.fedoraproject.org/pub/epel/epel-release-latest-5.noarch.rpm
$ sudo yum install beanstalkd
You may in fact have a restricted instance of batch...
You must go to your provider's interface and do the necessary to have root access. Have you tried something like explained here?
https://uk.godaddy.com/help/enable-adminroot-access-managed-or-fully-managed-12270
If it doesn't work for you, you may also try asking https://serverfault.com/ that seems more relevant for your case.
I recently set up a CentOS 6.4 basic LAMP server (no GUI) in a pre-built Virtualbox image, and then followed the installation guide/steps for MarkLogic.
When I attempt install with rpm -i /tmp/MarkLogic-8.0-1.x86_64.rpm, MarkLogic states that it cannot find libc.so.6, however when I run the command whereis libc.so.6, the shell responds with /lib64/libc.so.6
I would make a symbolic link I suppose, but I'm not sure where MarkLogic is expecting that file to be.
Does anyone have experience installing MarkLogic on Centos6 and how to verify the install is working properly? While ML gave some good instructions, I am very new to CentOS and Redhat, in general.
Running the following yum command before installing MarkLogic should be sufficient normally:
yum -y install glibc.i686 gdb.x86_64 redhat-lsb.x86_64
You can also look at this and related scripts for more inspiration:
https://github.com/grtjn/mlvagrant/blob/master/opt/mlvagrant/install-ml-centos.sh#L17
HTH!
Need GUI to run qemu on Ubuntu server: I need to run QEMU for ARM on a Ubuntu srever. THis QEmu is not supporting a text mode, so I need to install GUI software on Ubuntu server 13.04. Please suggest any that I can do a sudo apt-get install and get started quickly.
Are you connecting to the server over ssh? You could just use X forwarding to your local machine.
See the very good first answer here.
Then you can just start the software and interact with the GUI on a computer that already has the desktop environment installed.
You can do the following
sudo apt-get install ubuntu-desktop
For more info, look to this link
I am trying to configure and instance of http://waveinabox.net/ . I have been facing an error while installing wave box in linux server
operating system : Ubuntu 12.04.1 LTS
I have used commands from this site : http://www.waveprotocol.org/wave-in-a-box/setting-up
$sudo apt-get install mercurial ant default-jdk mongodb eclipse
$mkdir wave-development
$cd wave-development
Problem starts when I type this line
$hg clone https://wave-protocol.googlecode.com/hg/ wave-protocol
I am getting error (error is: No command clone found )
I am not used to linux commands much, can anybody tell me what could be the issue. thanks in advance
you need to install mercurial - sudo apt-get install mercurial
after installing try it.