Does anybody know what this error mean and how to fix it?
"No supported geometry data found for mesh "SketchUp"
I encountered this when using tool Collada2POD.
I read that article.
Can anybody tell me what the "lines" refer to in the sentence below.
"I ran into that problem, turns out the collada2Pod converter only supports meshes, but sketchUp can generate lines as well as meshes. I had to write my own converter using the OSS Assimp lib."
"i solved this problem btw, i had a single line which wasn't connected to anything inside my model. Just remove lonely lines and then you should be good to go."
Related
I am currently trying to process data for a simple network. This is the code I entered:
Screenshot here
I keep getting this error message but can't find any syntax problems or anyone else with this issue, I'm guessing it's something to do with my vienv because I've seen tutorials of people with no issues and that exact code. It's possible I haven't imported a package into my IDE and I am using anaconda and PyCharm if that helps.
Anyway, this is the error message I keep getting.
Error Message
You need to use transforms.ToTensor() instead of transforms.ToTensor when passing to transforms.Compose.
I'm new to Intel RealSense. I want to learn how to save the color and depth streams to bitmap. I'm using C++ as my language. I have learned that there is a function ToBitmap(), but it can be used for C#.
So I wanted to know is there any method or any function that will help me in saving the streams.
Thanks in advance.
I'm also working my way through this, It seems that the only option is to do it manually. We need to get ImageData from PXCImage. The actual data is stored in ImageData.planes but I still don't understand how it's organized.
https://software.intel.com/en-us/articles/dipping-into-the-intel-realsense-raw-data-stream?language=en Here you can find example of getting depth data.
But I still have no idea what is pitches and how data inside planes is organized.
Here: https://software.intel.com/en-us/forums/intel-perceptual-computing-sdk/topic/332718 kind of backwards process is described.
I would be glad if you will be able to get some insight from this information.
And I obviously would be glad if you've discovered some insight you can share :).
UPD: Here is something that looks like what we need, I haven't worked with it yet, but it sheds some light on internal organization of planes[0] https://software.intel.com/en-us/forums/intel-perceptual-computing-sdk/topic/514663
UPD2: To add some completeness to the answer:
You then can create GDI+ image from data in ImageData:
auto colorData = PXCImage::ImageData();
if (image->AcquireAccess(PXCImage::ACCESS_READ, PXCImage::PIXEL_FORMAT_RGB24, &colorData) >= PXC_STATUS_NO_ERROR) {
auto colorInfo = image->QueryInfo();
auto colorPitch = colorData.pitches[0] / sizeof(pxcBYTE);
Gdiplus::Bitmap tBitMap(colorInfo.width, colorInfo.height, colorPitch, PixelFormat24bppRGB, baseColorAddress);
}
And Bitmap is subclass of Image (https://msdn.microsoft.com/en-us/library/windows/desktop/ms534462(v=vs.85).aspx). You can save Image to file in different formats.
I came back to a Unity game that I was working on a couple of weeks ago, using version 4.6.1. After upgrading to version 5.0 and converting the project, there was an error in the following line:
Sprite.Create(plusTexture, Rect(toRightBoundry, 0, plusTexture.width, plusTexture.height), rightPos);
The image is imported as a single Sprite , 150 pixels per unit, pivoted at the center, using a bilinear filter. The import mode is compression , with a max size of 1024. Given those conditions and the fact that this piece of code was not altered since the working version and also after confirming that all values passed are valid, the following error is found at runtime:
"!hasError"
I have researched in the forums and cannot find a solution for this, mostly topics that end in the developers asking for a bug report. Is anyone familiar with how to solve this issue ?
Thanks in advance and have a nice day
it looks like an error do to unresolved merge conflicts from sprite atlas meta file of the resource file. We were getting a few funny named errors lie"aabb is not define" "!hasError" and something WIPPE. On of them was due to artist not resolving conflicts on a mesh meta file
I am trying to use the Sphinx4 library for speech recognition, but I cannot seem to figure out the correct combination of acoustic model-dictionary-language model. I have tried out various combinations and I get a different error every time.
I am trying to follow the tutorial on http://cmusphinx.sourceforge.net/wiki/tutorialsphinx4. I do not have a config.xml as I would if I was using ConfigurationManager instead of Configuration, because there is no perceivable way of passing the location of the config file to the Configuration itself (ConfigMgr takes it as an argument to the constructor); and that might be my problem right there. I just do not know how to point to one, and since the tutorial says "It is possible to configure low-level components of the application through XML file although you should do that ONLY IF you understand what is going on.", I assume having a config.xml file is not compulsory.
Combining the latest dictionary (7b - obtained from Sourceforge) with the latest acoustic model (cmusphinx-en-us-5.2.tar.gz - from SF again) and the language model (cmusphinx-5.0-en-us.lm.gz - from SF again) results in NullPointerException in startRecognition. The issue is similar to the problem here: sphinx-4 NullPointerException at startRecognition, but the link given in the answer no longer works. I obtained 0.7a from SF (since that is the dict the link seems to point at), but I am getting even earlier in the execution Error loading word: ;;; when I use that one. I tried downloading latest models and dict from the Github repo, that results in java.lang.IndexOutOfBoundsException: Index: 16128, Size: 16128.
Any help is much appreciated!
You need to use latest code from github
http://github.com/cmusphinx/sphinx4
as described by tutorial
http://cmusphinx.sourceforge.net/wiki/tutorialsphinx4
Correct models (en-us) are already included, you should not replace anything. You should not configure any XML files, use samples as provided in the sources.
i am trying to read dicom images without using imageviewer and i came across VtkGdmReader.. when i am trying to execute it, its giving me an error:
code => vtkGdmReader example
error C2039: 'SetInput' : is not a member of 'vtkTexture'
error C2039: 'SetInput' : is not a member of 'vtkPolyDataMapper'
please can any one tell me why am i facing this problem, is this error related to vtk version ? if so then how can i go about it ?
please help me resolving the problem..
As said in the comments, this error is related to the VTK version. SetInput() was removed in VTK 6.
You can either work in VTK 5 or update the code. If you decide to update it, this error gets fixed by replacing SetInput() with either SetInputData() or SetInputConnection() with a few modifications. You should use SetInputConnection() if you want the filters to go through the pipeline.
As an example of fixing the errors you mentioned, you should replace the following lines in the code you provided:
VTKtexture->SetInput(ima); and
VTKplaneMapper->SetInput(VTKplane->GetOutput());
to:
VTKtexture->SetInputConnection(reader->GetOutputPort()); and
VTKplaneMapper->SetInputConnection(VTKplane->GetOutputPort());
In the second modification (VTKplaneMapper), note that we just changed GetOutput() to GetOutputPort(), while in the first one (VTKtexture) we completely changed the argument passed to SetInputConnection(). That happens because data objects (such as ima) no longer have dependency on pipeline objects (such as algorithms and executives). In this case, we give the algorithm that generated that data object as the argument - if you look for it, you can see the line vtkImageData* ima = reader->GetOutput();, you just have to replace GetOutput() by GetOutputPort() as we did in the second modification.
I recommend looking into the VTK Wiki's VTK 6 Migration pages (and guide) for more information on this error and other errors that you might run into.