I have 2 xpages that interact together. The first acts as a homepage and allows the user to create a new document and fill out some basic header information. The button to create the new document, sets a sessionScope var with the NoteID. It then saves document1 and opens the same document using another xpage.
The second xpages is bound to document1, and uses the sessionScope to edit the document. This xpages contains and editPanel bound to document2. I want to create a child document to document2. This works but what happens is document1 is also saved as conflict. It is also saved as a second main document.
I DO NOT want to save document1 at all, but can't seem to prevent it. The button that creates document2 uses the simple action save document, and specfies document2.
HELP, I have tried everything, and have been stuck on this for 2 days.
Thanks!
Steve
To bind to multiple datasources, on your XPage, under Properties expand Data and set "Ignore Request Params" to TRUE
If you change the type of your buttons, to a simple button instead of a submit button, and handle the doc.save() yourself should solve your problem.
The Save Document simple action accepts the name of the data source to save as a String argument. If supplied, it will only save that specific data source.
Related
Ok, this is weird. I created an xpage input form. After the form is filled out, a document is created. I then create an email to notify people that the document has been created. I drop a doclink to the newly created document in the body of the email. During testing, I noticed that when I click the link in the email, the wrong Notes Form is opened. Instead of the 'TrainingRequest' form displaying the fields, the form 'Feedback' opens up instead. Here's what I checked:
- On the xpage data section, the 'form' is set to 'TrainingRequest'.
- When I open the document via the doc link, the field 'form' has the value 'TrainingRequest', which is correct. Yet it's displaying the 'Feedback' form.
- When I check the other field properties of the document, all the correct fields from the 'TrainingRequest' form are there and populated correctly.
- When I open the document via the view, the correct Notes form 'TrainingRequest' opens.
- There is no default form in the database design.
Has anyone seen this before?
thanks
clem
Doc links are always created using the default view of your application. If there is a form formula in this view then this overrides the form in the document. Remove the form formula of the default view and it works.
I almost NEVER use form formulas in my application because of the side effects.
Source code would be useful. But initial best guess based on what you're saying is you have two datasources on the XPage, neither have ignoreRequestParams set, so you're editing the same document with both data sources. ignoreRequestParams missing will ignore any properties you define.
I am working with xpages and need a unique number to be generated for each document. After saving the document, I want the user to be on the same page viewing the generated number. For this I have used the a action group on the submit button - 1) first action is a simple action which is saving the document. 2) Next action is script editor where I am calling my number generation agent 3) The last one is a simple action which is changing the current document mode from Edit to Read so that the user is still on the same xpage document after saving. But I see that the document is saved properly and also changed to read mode but I cant see the number generated. But if I close the document & open it again I see that the number is generated. I want this number to be shown without closing & reopening the document. Any help is appreciated.
If you're updating the backend Document datasource, you'll need to either fully reload the page or close and re-open. Try setting the unique reference on the dominoDocument datasource and re-saving that. Alternatively, build the relevant URL to the XPage with the relevant documentId parameter and redirect accordingly.
You can put a Full Upload at your onClick event or a partial Upload.
With the partial Update will update just one element of your page, if your computed fields are inside this element they will be updated.
http://i.stack.imgur.com/g0DA7.png
I know it is a very simple question , but I'm trying to see the difference between a view panel ( that I drag from the Container Controls ) and an embedded view.
How can I add an embedded view on my xpages?
Or the 2 items are one and the same.
The reason why I'm asking this question: I have a view panel on my xpage ( I thought it is like an embedded view in clasic lotus notes programming ) where I have listing some docs. The first column is categorized based on the UNID document.
I noticed if I compose again another document, this view contains all the previous docs., and all the UNID categorized. The view panel isn't empty.
In lotus notes programming:
If I have a main form and a computed text field with #Text(#DocumentUniqueId) and some button for composing another form ( of course, when clicking the button I saved the main form to obtain the UNID ), and this form has the same text field name as the previous - I'm passing the UNID to this second form. If the main form contains an embedded view listing all documents saved from the second form I will use the first column categorized and hidden with the name of the field from the second form ( which will contain the UNID ). If I save and close the 1st main, and then I'll compose another main form, the embedded view is not listing the previous documents already saved.
Well, this view is already created.
I did drag and drop this view in myxpage. I have a button inside myxpage that shows a dialog. Here a datasource is declared, the dialog containing some fields. In the main xpage ( where is defined another datasource ) there is a computed field which takes the UNID of the document. Before I click the dialog I save the first datasource, to pass the value UNID to other field inside the dialog.
I save the datasource from the dialog & close the dialog, and then the view panel ( which is the view from the lotus notes classic presented above ) lists the doc. If I close the main xpage ( save it if is a new one ) and then open another main document, the view isn't empty, it contains the previous document lists. ( I tried also to hide it, if the xspDoc is new. But when I try adding other docs. from the dialog, the view panel lists also the previous documents from the previous doc., even if the UNIDs are distinct )
Thanks in advance.
To explain this best, it's good to consider what a view and an embedded view in Notes Client is. A view determines the look and feel, like a View Panel and by default will show all documents found by the selection criteria. So in this case the documents available correspond to a dominoView datasource bound to the underlying view with no additional criteria defined.
An embedded view still uses the view to determine the look and feel, but will not display the first column (that's effectively a property of the embedded view "control" in Notes Client). In the View Panel you choose which columns display, so you would need to code that yourself on the View Panel, where you choose which columns to display. The embedded view also has a property to define the single category. But the View Panel and other repeating containers (like Data Table and repeat control) don't restrict the data available, that's done by the datasource - a dominoView or e.g. a ViewEntryCollection for anything other than the View Panel. So in that you set the filter.
However, a new document does not have a UNID, so it cannot restrict what is displayed. Instead, I think a good approach is to set the visibility so the View Panel is only displayed if it's not a new document. You can use loaded, if you fully reload the page after save, or else rendered.
First off, this is not a stupid question.
I am assuming you are using a self implemented parent response system and have a view sorted by the parent UNID. Under the data source of the view panel, find the the "filter by category name" option. there compute the UNID value, or category value you are searching for.
Steps:
insure that the background view is categorized (ascending order is best to insure that this works, though I doubt it is needed)
drag (my favourite is the dynamicViewPanel) a view control onto the xpage.
Under Properties/Data there is a place to calculate the value of the category to show. If you want an exact match, check the exact match check box.
If you mistype the category value or the value is not there, then no documents will be shown.
if you put in an empty value all documents are shown (at least in the tests that I can remember)
if documents are returned, the categorized column is automatically hidden.
EDIT
If you are reading the value from a field, you can use the code:
xspDoc.getItemValueString("fld");
If you are searching based on the UNID, again, hide the viewPanel if the document is new. If the value is not yet set, also hide the panel.
If you have two custom controls, even if a custom control is embedded in the second, you cannot easily have one custom control access the values of the datasource in another. I am sure there are ways to trick this into working, but in this case, use a viewScope variable to access the values and possibly an onLoad, onChange or onSave event to update the viewScope variable. Make sure to verify that the result is not null or empty by either printing it out to the server log or another field.
Final Edit after question edit/expansion
These are the steps that I would take to do what you described.
You have your parent document XPage. Insert all fields for this Xpage.
Drag a dynamicViewPanel onto the XPage. If parentDoc is New, then hide.(this could be a custom control in theory, but if you are having trouble, try it without for the sake of trouble shooting.
Set dynamicViewPanel datasource to ignoreReqeustParams.
Calculate the datasource and setting the "Filter by category name" filter. When computing this, for the sake of ease and troubleshooting, print this value out to the server, or other logging mechanism. You can delete it later.
Verify that the correct UNID/Value is being inserted into the document you create in the dialog.
If you are using a scoped variable to hold the filter value, be sure you are using viewScope and not appliationScope or sessionScope.
if you are using a custom control and standard parameters (not scopedVars), verify that the compositeData variable is being updated with a log or server print.
Consider setting Dialog Properties/AllProperties/basics/refreshOnShow to true
Play with the partial refresh option for the dialogOpen action, test a full vs partial refresh.
Remember to set the ignoreRequestParams for the document you are creating in the dialog to true
Consider making the new document data source created in the Dialog to request scope.
And of course consider and test all datasources being defined on the XPage on not some here, some there.
Verify that you are taking the value of the UNID from the main document and not the new dialog document by mistake!
Those are all of the tips I can think of right now, pretty much in the order I'd try them in. If that does not help, then I suspect there is a piece of this puzzle that you are not including in the question. Remember, try to keep things as simple as you can. You can over think things, make things harder than they need be.
I have an Xpages application that pulls data from another .nsf file. I have a view panel linked to a view in that db. The view has documents with several different forms in it. I want to be able to open each document in it's own form(xpage).
How do I write a computed At Runtime, open selected document using: statement that will select the correct Xpage to present the document.
If you use the Data View component instead of a View Panel, you can compute the pageName attribute, referencing the var attribute to return a different value for each row based on the document that row represents. The flexibility of the Data View component also makes it easier to make your app look more like a modern web application and less like an Excel spreadsheet. As an additional bonus, the mobile theme invokes a renderer that makes each Data View instance look like a native mobile list, so using Data Views instead of View Panels simplifies mobile development.
You have 2 options:
use "use xpage associated with form" and edit the form's property
use a SSJS formula to compute the Form. You provide a variable name in the view control var to access a view row as XSPViewEntry. If the Form is in a view column even one you don't display you use .getColumnValue otherwise getDocument.getItemValueString
Does that work for you?
Maybe this mothed can help you: Unable to get document page name for
Hope this helps
Mark
I had a similar problem today. I use only one form but 3 different xpages for associated with this form. I have 3 different document types in the view. I used rowData the get the type of the document.
try{
var v=rowData.getColumnValue("form");
if(v.indexOf("x")> -1){var page ="x.xsp"}
else if(v.indexOf("y") > -1){var page = "y.xsp"}
else{var page = "z.xsp"}
}catch(e){
var page = "x.xsp"
}
So to your view you can create a column with the value of the form and you can use it.
I have used the extension library Dynamic View control which has an event you can code to get a handle to the NotesViewEntry which was selected. See the demo database page Domino_DynamicView.xsp and the Custom Event Handler tab for an example.
Note, in 8.5.3 (I have not upgraded yet) if you add or edit the eventHandler for onColumnClick it will be added to the XPages source as an xe:eventHandler. It needs to be an xp:eventHandler to work. The way to do it is to copy the code in the source from the exiting event and delete it. Recreate the event and update the code. Then go back into the source and change the tags within the eventHandler to xp:.
Background: One xpage bound to document1. On this xpages is a tabbed table contain several tabs. Each tab contains an panel bound to other data sources incl document2. Document2 is created and made a child of document1. In each panel is a table to allow the user to create the new document, as well as two view controls. Everything works beautifully...until...
Problem: I was asked to add a way to upload an attachment to the child document. I first created an rich text field on the bound document called "ScannedInvoice". I then create a File Upload Control from the core controls and bound it to document2/ScannedInvoice. By rule, I only want a single attachment, otherwise I would consider the openNTF upload control.
I cannot figure out why nothing appears on the back end when I upload a file and create a new document. Everything else works, but there is no attachment in the ScannedInvoice field and also no $FILE fields attached to the document either.
Thanks in advance for any tips. I have searched quite a bit and have not found any answers. - Steve
<xp:fileUpload id="fileUpload1"
value="#{document2.ScannedInvoice}" useUploadname="false"
style="font-size:8pt" filename="scannedinvoice.jpg"
mimetype="image/jpeg">
</xp:fileUpload>
Note: The field ScannedInvoice on the Invoice form is rich text.
Code to save button: document2.save()
Document2 has scope=request and ignoreRequestParam=true. Both of these have to be set like this in order to work. parentID=# document1.getNoteID()
a file upload needs a full refresh of the page to be able to upload the file. Make sure that you are doing that.
======================================
Update Domino 9.0.1 supports partial refresh uploads