I must have some setting configured in Xcode that is stopping me to add a new plist key-value pair. Three weeks ago I upgraded to the latest Xcode version 4.5. Note: I didn't ever try adding a new key-value pair before so I don't know if this problem is due to the upgrade or not.
As you can see in the image below if I click on the round circle with the plus sign in it, nothing happens. No new row is added If I right click on the row and click on 'Add Row'item, nothing happens.
Note that clicking on the circle with the minus in it will delete the selected key-value pair. If I click on the little up/down arrows to the left of the plus in the circle then I can overwrite an existing key-value pair. But for the life of me I can't figure out how to add a new row for a new key-value pair.
I have rebooted Xcode. I have rebooted my iMac. I've tried creating new dummy projects to see if this was a only a limitation of my current project - it wasn't. In every circumstance I COULD NOT add a new key-value pair. Any ideas?
I don't know if this means anything, but when I click on the circle with the plus sign, not only does it NOT add a new key-value row, as you can see in the image, the 'Type' row disappears from the table. Before clicking on the plus in the circle I could see the Key, Type and Value columns. I click on the plus and the 'Type' column disappears. If I collapse and reopen the 'Custom iOS Target Properties' section, then the 'Type' column returns only to disappear again the next time I click on the plus/circle button. Strange!
While the problem described above remains, Mnemonix over at the Big Nerd Ranch forum provided a work around:
http://forums.bignerdranch.com/viewtopic.php?f=218&t=5318&p=13864
Rather than attempting to edit the Plist file as shown above, if you click on the plist file under the 'Supporting Files' folder, I can add new key-value rows/entries there without any problems.
...Dale
Related
I created a custom screen in Acumatica. I have a simple table and a grid to add records to it. The Account Mapping grid works (and it is way more complicated). But on the Branch Mapping grid, when I click the “PLUS” icon, the icon goes grey and no new row is available on the grid.
This is what is looks like after clicking the PLUS icon:
The table is very simple.
When a Company is selected, the view for the grid is
public SelectFrom<ICSBranchMapping>
.Where<ICSBranchMapping.organizationID
.IsEqual<ICSSetup.organizationID.FromCurrent>>.View BranchMapping;
The ICSSetup table is even simpler:
If I create a new record in ICSSetup, it lets me add 1 row to the ICSBranchMapping table
But I cannot add another row.
Here is the DAC for the ICSBranchMapping table
The records in the DB all look fine after adding the 1 row it will allow me to enter.
The action button is a dummy. The code has been commented out to ensure it has nothing to do with the issue.
I forgot to mention, I CAN update the existing row.
I’ve been fighting with this for 2 days. If anyone has any suggestions, please help.
Solved. I added the BranchMapping grid using the customization editor.
It did not include this line in the aspx:
That fixed it. It seems like that should be a default in the Screen Editor.
When I click one element
then hold the shift key
and try to select another element
the first one is DE-selected!
What can I do?
I suppose you should hold the CTRL-key instead of the SHIFT key.
Sorry the thing is I was trying to select the elements in the Blueprint window. It worked when I made the selection in the Compoment Tree window.
where I've been misdirected
I am trying to figure out the best approach for something - I have added an additional table to the Sales Order screen as a new tab and it works fine to save records into it. The next thing needed is to potentially explode a value into many lines if it is a certain type. So if they enter a "kit" into my grid/tab - we would want to replace the kit with its components and not have the kit in the grid anymore.
I know how to insert the records etc. My biggest concern is which event to do the work under (field or row level and -ed vs -ing) . I know I could potentially create an endless loop if I don't do it properly.
**edit - I tried using RowInserting - I can cancel the inserting and add my records in there - however it does not trigger the screen to refresh from the cache. If i Save the order - it will display my new rows properly. however, i dont want to do a save in my code. I am also concerned about it triggering another rowinserting.
With rowinserted - it seems to be the same with the screen not refreshing and also i get an error about the row that i deleted.
We had a similar request and what we did is instead of adding the item in grid level and waiting for a trigger, we added a grid tool bar button that pops up a small smart panel to select the kit item, its version and the quantity required. Then we inserted the component lines to the grid with required calculations.
I have been trying to add Data items for my combobox in the DialogWindow of my mfc project, at design time by setting strings delimited by semi-colons for the Data property of this combobox.
But it just shows empty combobox at runtime. I tried using AddString() method of this combobox manually in the OnInitDialog() event of the DialogBox too. But that was also not working.
Tried creating a demo project again and when I added the combobox and put the value a;b in the Data property of it, it is showing up. But tried the same on my project and it is still showing the empty list in the new combobox! Tried to compare both project's code, like the header files and initialization's etc. Found that both are same. Other than some event declaration for the buttons and my custom c++ code in my project, the rest of the code is same as that of the newly created demo project!
Why in my project this combobox is showing an empty list of items? :(
EDIT:
Just noticed that the items are already in the list. But the dropdown is of small height and thus preventing the actual items from showing up! :(
Tried to look increasing the size of the combobox, but I couldn't find any property in the Property Window and dragging the corners of th combobox doesn't increases the height either! :(
Increase the size of the dropdown list like this, in the design window:
Click on the arrow on the right side of the combobox (highlighted in yellow on first pic). Then click and drag the bottom mid resize marker to increase the height (highlighted in the second pic).
This will increase the size of the dropdown list.
Otherwise when we try to click on the resize markers to increase the height, it would be disabled. So make sure you click on the arrow on the right side of the combobox first.
I'm designing a workflow database in Lotus Notes 6.0.3 (soon upgrading to 8.5), and my OS is Windows XP.
I have recently tried converting a tabbed table into a programmable one. This was so that I could control which tab was displayed to the user when it was opened, so that they were presented with the most appropriate one for that document's progress through the workflow. That part of it works!
One of the tabs features a radio button that controls visibility of the next tab, and a pair of cascading dialogue boxes. One contains the static list "Person":"Team", and the other has a formula based on the first:
view:=#If(PeerReview = "Team"; "GroupNames"; "GroupMembers");
#Unique(#DbColumn(""; ""; view; 1))
The dialogue boxes have the property "Refresh fields on keyword change" selected.
The behaviour that I wasn't expecting is this. If the radio button is set to "Yes" and a value is selected in one of the dialogue boxes, the table opens the next tab. If the radio button is set to "No" and a value is selected in one of the dialogue boxes, the entire table is hidden.
I can duplicate the latter by switching off the "Refresh fields on keyword change" property on the dialogue boxes and instead pressing F9 after selecting a value. I have no idea why the former occurs, though. The table is called "RFCInfo", and I have a field on the form called "$RFCInfo" which is editable, hidden from all users who aren't me and initially set by a Postopen script, which I can post if necessary - it's essentially a Select Case statement that looks at a particular item value and returns the name of the table row relating to that value.
Can anyone offer any pointers?
Hide-when formulas in table cells in Notes R5 and R6 were notorious for breaking in unpredictable ways when you edited the table cells. Even in R7, I think they were still a little bit funky, but by R8 they were finally really solid. You haven't shown the hide-when's but my first guess is that you are simply a victim of the bad behavior.
Please don't shoot the messenger, but the usual way we addressed this sort of problem was to painstakingly re-create the entire table from scratch, and hope we never have to edit it again. I.e., make a copy of the table in a scratch form and clear all the hide-whens -- one by one. Then create a brand new empty table in a second scratch form and get all the cells set up exactly like the original table, including nested tables, merged cells, and other settings -- but skip the hide-whens for now. Then copy each cell's content from the first scratch form to the corresponding cell of the second scratch form. Then, referring to the hide-whens in the original form, re-create each hide-when on the paragraphs in the cells on the second scratch form. Finally, delete the original table from your original form and then copy/paste the table from the second scratch from back into your original form.
Once you have R8.5, move to XPages in Notes, it's almost a no-brainer to implement your tabs. And in return, you get many other interesting issues to solve!