I have a dataset(a file) with a single column and some entries. I wish to plot a horizontal line for each entry, where each entry is the y-axis value of the line. How can I do this?
What a strange plot you're trying to make. You can do it using vectors without heads:
set style arrow 1 nohead
plot 'datafile' using (0.0):1:(0.0):(2.0) with vectors arrowstyle 1
Or, in gnuplot shorthand (just for fun):
p 'datafile' u (0.0):1:(0.0):(2.0) w vec as 1
adjust yrange and xrange accordingly
Related
I'm trying to plot a 1D heatmap using two columns of data (x value and y value) in gnuplot. The linegraph plotted using my data is like this:
Linegraph:
However after some trying I can only achieve this:
What I've got:
And what I want to get is something like this. (Only example)
What I want:
The gnuplot script that I use is as follows:
set view map
set size ratio 0.2
unset ytics
unset key
splot 'test.dat' u 1:(1):2 palette
Could anyone help please?
So you want to use the y axis as a fake dimension in order to increase the width of your second line plot?
Sure, this is e.g. possible with boxxyerror with explicit ymin and ymax errors that fill the yrange.
set xr [-10:10]
set yr [0:1]
xspacing = 0.1
plot '+' u 1:(0.5):($1-xspacing):($1+xspacing):(0):(1):(sin($1)) w boxxyerror lc palette
In your case replace the sin(x) with the respective column of your data. With the special file '+' the x-width has no effect, but in your case you might need to play around with a proper xspacing in order to avoid white gaps between the points.
I would do it like this:
unset key
set xrange noextend
set offset 0,0,graph .05,graph .05
set palette cubehelix negative
plot 'foo.dat' using 0:3 with lines lc "black", \
'foo.dat' using 0:(70):3 with lines lc palette lw 10
I have a dataset that defines two curves, and I want to fill the area between them. However, contrary to the standard situation, the abscissa is to be plotted on the vertical axis and the ordinates on the horizontal one; the abscissa indicates depth, this is a common plotting format in geophysics. In other words, I want something like
plot 's.dat' u 1:2:3 w filledcurves
but with swapped axes so that the filled area is bounded not at the top and bottom but to the left and right by the curves as seen in
plot 's.dat' u 2:1,'s.dat' u 3:1
My dataset is like this:
0. -1.776 -0.880
160. -1.775 -0.882
160. -1.692 -0.799
320. -1.692 -0.800
320. -1.531 -0.634
480. -1.534 -0.637
480. -1.286 -0.394
Is this possible in Gnuplot?
Thomas
This is a totally different solution using 3D plot style "with zerror".
You will need current gnuplot (version 5.2) for this. The plot style was really not designed for this so there are some difficulties (e.g. x tic marks invisible because drawn perpendicular to the plane of the plot, all tic labels requiring an offset for readability).
#
# [mis]use 3D plot style "with zerror" to create a plot of the xz
# plane with area fill between two sets of data points with
# equal coordinates on the vertical axis (x) but contrasting
# values on the horizontal axis (z).
#
set view 270, 0
set view azimuth -90
set xyplane at 0
unset ytics
set ztics offset 4, -2 out
set xtics offset 4
splot 's.dat' using 1:(0):(0.5*($2+$3)):2:3 with zerror notitle
If there is some value of x which is guaranteed to lie between the two curves then you can plot in two halves. For the data you show, x=-1 would be a suitable value and the plot command would be:
plot 's.dat' u 2:1 with filledcurve x=-1 lt 3, \
's.dat' u 3:1 with filledcurve x=-1 lt 3
If the requirement for a constant intermediate x value can only be
satisfied piece-wise, e.g.
x=-1 for (0<y<500), x=0 for (500<y<1000)
then it may nevertheless be possible to construct a graph by stacking
the piecewise sections.
A simple way would be to define a closed line and fill it. For this, you take column 2 and add the reversed column 3. You probably need gnuplot >=5.2 for this.
Code:
### fill between vertical curves
reset session
$Data <<EOD
0. -1.776 -0.880
160. -1.775 -0.882
160. -1.692 -0.799
320. -1.692 -0.800
320. -1.531 -0.634
480. -1.534 -0.637
480. -1.286 -0.394
EOD
set print $Outline
do for [i=1:|$Data|] {
print sprintf("%s %s", word($Data[i],2), word($Data[i],1))
}
do for [i=|$Data|:1:-1] {
print sprintf("%s %s", word($Data[i],3), word($Data[i],1))
}
set print
plot $Outline w filledcurve lc rgb "green"
### end of code
Result:
I have 4D data X,Y,Z plus a field. I would like to do a 4d plot of the field restricted to a sphere. I already use splot w pm3d to have the color bar on the sphere indexed by my field, but I think it would be more readable if I could add 3d contour lines.
I would like something like last example of "function plot" (protein orientation) at http://www.originlab.com/index.aspx?go=Products/Origin/Graphing
Is it even possible in gnuplot ? If so, how to do it ?
Gnuplot cannot generate 4d contour plots.
But if I understand correctly, you have a special case, you do not really have 4d data. The z coordinate depends on x and y such that the point is on a sphere. Maybe this can be used to get the contours.
I assume the datafile contains datapoints for the complete sphere, arranged circle by circle from bottom to top of the sphere, each circle in a separate block.
I have tried this:
Separate the points on the upper half from points of the lower half of the sphere, we need this separation for the sign of z.
Plot the contours of the two halfs in two datafiles contour_l.dat and contour_u.dat. This will only plot the x and y coordinates.
Merge the original datafile and the two contour datafiles into one plot. Pythagoras could help reconstructing the z coordinates for the contour datafiles.
This is the script:
set pm3d depthorder interpolate 5,5
set hidden3d front
unset surface
set contour surface
set zrange [0:1.1]
set table "contour_u.dat"
splot "sh.dat" using 1:2:4 w l
unset table
set zrange [-1.1:0]
set table "contour_l.dat"
splot "sh.dat" using 1:2:4 w l
unset table
set surface
unset contour
set xrange [-1.1:1.1]
set yrange [-1.1:1.1]
set zrange [-1.1:1.1]
set xyplane relative 0.0
set terminal pngcairo size 640,640
set output "c.png"
unset key
splot "sh.dat" using 1:2:3:4 w pm3d, \
"contour_u.dat" using 1:2:( sqrt(1.0-($1*$1+$2*$2))):3 w l lc rgb "black",\
"contour_l.dat" using 1:2:(-sqrt(1.0-($1*$1+$2*$2))):3 w l lc rgb "black"
You did not post data, so I have taken one of the spherical harmonics. With Gnuplot 4.6, I get the following result:
As you can see, it is still not perfect. The contour at x=0 should be investigated, and if I remove the "sh.dat" w pm3d line, the image gets very strange.
But at least this approach might be a starting point, one could try to manually play with the contour line datafiles.
I've used the arrow to draw a vertical line and I would like to title it so it's shown in the key. Is there a way to do it? As far as I can tell for the manual, there's no title option in the syntaxis for arrow, but I'm sure there's a workaround.
The only thing I think of is drawing the arrow with the same color as something outside the plot range and use its title, but it's rather clumsy.
I'm using the terminal pngcairo, just in case it's relevant.
You can plot something with vectors, which will give a title in the key. It plots arrows based on data points. The using statement is x:y:Δx:Δy where the tail is positioned at (x, y) and the head is at (x+Δx, y+Δy). For a vertical line, you can turn off the arrow head and use Δx of zero:
set terminal pngcairo dashed
set output 'plot.png'
set angles degrees
set xrange [0:360]
set yrange [-2:2]
plot sin(x), '-' using 1:(-2):(0):(4) with vectors nohead lc rgb 'black' title '90 degrees'
90
e
Gnuplot will ignore anything with an invalid value (1/0 for instance). You can take advantage of this to plot what you want.
Suppose that we set a vertical line with
set arrow from 1,graph 0 to 1,graph 1 nohead lt 0
Now, if I want this to be in the key, I can just plot a line with lt 0 but specify the y-value as 1/0. This will insert it in the key, but will not actually draw the line.
plot [-3:3] x**2 t "X Squared", 1/0 t "Vertical Line" lt 0
I have a gnuplot script which plots a histogram. I used the following syntax:
set style data histogram
set style histogram cluster gap 2
set style fill solid
set logscale y
rgb(r,g,b) = int(r)*65536 + int(g)*256 + int(b)
plot 'histogram_data' using (column(0)):2:(0.5):(rgb($3,$4,$5)):xticlabels(1) w boxes notitle lc rgb variable
What the last line does is: using column 1 as x labels, column 2 as the height of the histogram bars, 0.5 as box width, and columns 3, 4 and 5 as the rgb values to colour the bars.
Now, the problem is that modifying the gap parameter in line 2 does not change in any way the spacing between bars, even though as far as I understand that is the correct way to adjust such spacing. I am using gnuplot 4.6 patchlevel 4.
I found a way to do this with boxes, though I do not consider it very clean:
plot 'histogram_data' u (column(0)*2+1):2 w boxes notitle lc rgb 'white',\
'histogram_data' u (column(0)*2):2:(rgb($3,$4,$5)):xticlabels(1) w boxes notitle lc rgb variable;
This command is plotting all the data of the main plot on even slots and a white box on odd slots. So the first line in the plot command is plotting the gaps between every box of the plot (the width of these gaps can be specified using the boxwidth property I think but I haven't tested this), while the second line is drawing the actual plot.
I could not find a way to do this with the histogram plotting style, keeping the variable colours specified in the data file.