When I run my build it will fail with the following log:
[14:14:45]Checking for changes
[14:15:02]Publishing internal artifacts
[14:15:02]Clearing temporary directory: /var/TeamCity/buildAgent/temp/buildTmp
[14:15:02]Free disk space requirement
[14:15:02][Free disk space requirement] Free disk space requirement of 3.0Gb is not met for directory /var/TeamCity/buildAgent/work/870524f98b27404c (only 2474.7Mb is free).
[14:15:02][Free disk space requirement] Free disk space requirement of 3.0Gb could not be met for directory /var/TeamCity/buildAgent/work/870524f98b27404c (only 2474.7Mb is free)
[14:15:02]Checkout directory: /var/TeamCity/buildAgent/work/870524f98b27404c
[14:15:02]Repository sources transferred
[14:15:02]Updating sources: server side checkout
[14:15:02]Starting: /usr/bin/mono /var/TeamCity/buildAgent/plugins/dotnetPlugin/bin/JetBrains.BuildServer.MsBuildBootstrap.exe /workdir:/var/TeamCity/buildAgent/work/870524f98b27404c /msbuildPath:/usr/lib/mono/4.0/xbuild.exe
[14:15:02]in directory: /var/TeamCity/buildAgent/work/870524f98b27404c
[14:15:03]Process exited with code 1
[14:15:03]MSBuild output
[14:15:03][MSBuild output] Start MSBuild...
[14:15:03][MSBuild output] '/usr/bin/mono' '/usr/lib/mono/4.0/xbuild.exe "#/var/TeamCity/buildAgent/work/870524f98b27404c/MyNancy.sln.teamcity.msbuild.tcargs" MyNancy.sln'
[14:15:03][MSBuild output] working dir = '/var/TeamCity/buildAgent/work/870524f98b27404c'
[14:15:03][MSBuild output] MSBUILD: error MSBUILD0004: Too many project files specified
[14:15:04]Publishing internal artifacts
[14:15:04][Publishing internal artifacts] Sending build.finish.properties.gz file
[14:15:04]Build finished
Is there a way to catch the tcargs file contents? It is not in the temp dir of the buildagent. Maybe someone knows what I am doing wrong. When I call the xbuild on the working dir manually it builds fine.
Thanx
Related
I am getting an error writing a file, that is driving me crazy.
I have an C# netcore 5 application running on RH Linux.
I mounted an shared folder (windows) using: sudo mount -t cifs -o username=MyDomainUsername,password=MyDomainUsernamePassword,domain=MyDomain,dir_mode=0777,file_mode=0777 //ipv4_from_destination/Reports /fileshare/Reports
Then I run the app, using just ./WebApi --urls=http://+:8060
The read/write test executes the following steps:
Create a text file.
Write the text file.
Delete de text file.
Creates a directory
Creates a text file inside that directory
Writes the text file
Deletes the text file
Deletes the directory.
Now the problem:
The text file is created
The write operation fails.
Where goes part of the log:
Creating file: /fileshare/Reports/test.616db7d1-07fb-4599-a0cf-749e6a8b34ec.tmp...Ok
Writing file: /fileshare/Reports/test.616db7d1-07fb-4599-a0cf-749e6a8b34ec.tmp...[16:22:20 ERR] ID:87988856-a765-4474-9ed9-2f04aef35771 PATH:/api/about ERROR:System.UnauthorizedAccessException:Access to the path '/fileshare/Reports/test.616db7d1-07fb-4599-a0cf-749e6a8b34ec.tmp' is denied. TRACE: at System.IO.FileStream.WriteNative(ReadOnlySpan`1 source)
at System.IO.FileStream.FlushWriteBuffer()
at System.IO.FileStream.FlushInternalBuffer()
at System.IO.FileStream.Flush(Boolean flushToDisk)
at System.IO.FileStream.Flush()
at System.IO.StreamWriter.Flush(Boolean flushStream, Boolean flushEncoder)
at System.IO.StreamWriter.Flush()
at WebApi.Controllers.ApplicationController.TestFileSystem(String folder) in xxxxxxx\WebApi\Controllers\ApplicationController.cs:line 116
What I discovered so far:
I can create and delete the files and directories.
I cannot write to files.
Can someone give me an hint on this?
Solved using the cifs option nobrl
I'm having an issue with robocopy in which every call to create a new directory on the destination fails. I get outputs such as:
2019/03/19 16:59:11 ERROR 1 (0x00000001) Creating Destination Directory T:\tmp\MIDCAS_SSP\Documents\Customer Reviews\MASPS 1 review\Received Comments\
The copy operation I am attempting is from a sharepoint list mapped to drive X: onto a subdirectory of a physical hard drive T:
OS Name Microsoft Windows 10 Home,
Version 10.0.17134 Build 17134
I have tried several variants, run command as both user and admin. Below is the commands and printout of one of many attempts.
PS T:\tmp\MIDCAS_SSP> .\Sync_XNet.bat
T:\tmp\MIDCAS_SSP>SET Target=T:\tmp\MIDCAS_SSP\Documents
T:\tmp\MIDCAS_SSP>ECHO T:\tmp\MIDCAS_SSP\Documents
T:\tmp\MIDCAS_SSP\Documents
T:\tmp\MIDCAS_SSP>Set XNetSource=X:
T:\tmp\MIDCAS_SSP>net use X: "\\site.name.domain#SSL\DavWWWRoot\sites\MidcasSSP\Shared Documents"
T:\tmp\MIDCAS_SSP>robocopy /XJ /ZB /MIR /FFT /NDL /TS /R:1 /W:2 "X: " "T:\tmp\MIDCAS_SSP\Documents "
-------------------------------------------------------------------------------
ROBOCOPY :: Robust File Copy for Windows :: Version XP010
-------------------------------------------------------------------------------
Started : Tue Mar 19 16:59:11 2019
Source = X:\
Dest : T:\tmp\MIDCAS_SSP\Documents\
Files : *.*
Options : *.* /FFT /TS /NDL /S /E /COPY:DAT /PURGE /MIR /ZB /XJ /R:1 /W:2
------------------------------------------------------------------------------
2019/03/19 16:59:11 ERROR 1 (0x00000001) Creating Destination Directory T:\tmp\MIDCAS_SSP\Documents\Customer Reviews\MASPS 1 review\Received Comments\
Incorrect function.
Waiting 2 seconds... Retrying...
2019/03/19 16:59:13 ERROR 1 (0x00000001) Creating Destination Directory T:\tmp\MIDCAS_SSP\Documents\Customer Reviews\MASPS 1 review\Received Comments\
Incorrect function.
ERROR: RETRY LIMIT EXCEEDED.
I've checked user and admin rights to the disk.
If I manually create the missing directories, any files therein are copied as intended until a new subdirectory is found but that's a lot of work to get through...
The above listing is using Windows 10 robocopy, but also using the Windows Server 2003 Resource Kit version I have the same problem.
I've also attempted to connect using https:// syntax for the net use command. After I post this I'll reboot as a last ditch attempt.
Ideas where I went wrong? Alternative approaches to back up a remote SharePoint sites' files to off-site disk?
I ran into the same problem, and googling brought me here. Ultimately I didn't find why it doesn't work, but a workaround that did the job for me was to copy the directory structure first using xcopy.
Example:
xcopy /t /e "\\intranet.companyname.com\departments\deptname\Procedures\" "z:\backup\"
robocopy.exe "\\intranet.companyname.com\departments\deptname\Procedures\" "z:\backup" /mir /R:0
We have an application that makes a backup of a configuration file by copying it to a sub-folder (see log file entry below) using the following command:-
BOOL b = MoveFileEx(ExistingFileSpec, NewFileSpec, MOVEFILE_REPLACE_EXISTING | MOVEFILE_WRITE_THROUGH | MOVEFILE_COPY_ALLOWED);
This appears to work as expected on most systems but on two we get the following warning in our log file:-
11 Jun 2018 10:58:05.437 W. COMMON WARNING MoveFile failed on C:\Program Files\Configuration\Stores.xml to C:\Program Files\Configuration\Backup\Stores.xml LastError=183
Lasterror =183 means "ERROR_ALREADY_EXISTS"
This is odd since MOVEFILE_REPLACE_EXISTING is specifically meant to enable this command to work when the target file exists.
This is happening on Win7 x86 machines.
In a previous version of the code MoveFile was used but with a DeleteFile call immediately prior to ensure the target file did not exist. When the code was rolled back to this version it works.
Any suggestions?
I have a trouble of putting my initramfs.cpio in my kernel image by yocto.
I have two bb files, one is used to build an initramfs, and the other one is used to build a fitimage.
I successful to build the fitimage bundled with my initramfs image.
But it always failed to build a fitImage that has an initramfs.cpio.gz in the /usr directory in the fitImage.
( I mean, I want to see a file named initramfs.cpio in the /usr when I use my fitImage booting to console )
====================================================================
Here are my error message..
ERROR: linux-mine-1_4.9.27+gitAUTOINC+d87116e608-r0 do_package: QA Issue: linux-mine: Files/directories were installed but not shipped in any package:
/usr
/usr/initramfs-mine-qemu.cpio
Please set FILES such that these items are packaged. Alternatively if they are unneeded, avoid installing them or delete them within do_install.
linux-mine: 2 installed and not shipped files. [installed-vs-shipped]
ERROR: linux-mine-1_4.9.27+gitAUTOINC+d87116e608-r0 do_package: Fatal QA errors found, failing task.
ERROR: linux-mine-1_4.9.27+gitAUTOINC+d87116e608-r0 do_package: Function failed: do_package
ERROR: Logfile of failure stored in: /home/paul/projects/Test/yocto/build/tmp/work/mine-poky-linux-gnueabi/linux-mine/1_4.9.27+gitAUTOINC+d87116e608-r0/temp/log.do_package.26149
ERROR: Task (/home/paul/projects/Test/yocto/yocto-2.2/poky/../meta-mine/recipes-kernel/linux/linux-mine_4.9.bb:do_package) failed with exit code '1'
====================================================================
Here is my kernel image bb file
FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}-${PV}:"
LINUX_VERSION ?= "4.9.27"
SRCREV = "d87116e608e94ad684b5e94d46c892e33b9e2d78"
SRC_URI = "git://local/kernel;protocol=ssh;branch=master"
#FILES_${PN} += "/usr /usr/initramfs-mine-${MACHINE_ARCH}.cpio"
#FILES_${PN}-${PV} += "/usr /usr/initramfs-mine-${MACHINE_ARCH}.cpio"
#IMAGE_INSTALL = "initramfs-mine"
do_install_append () {
echo "WangPaul : S=[${S}]"
echo "WangPaul : B=[${B}]"
echo "WangPaul : D=[${D}]"
install -d ${D}/usr/
install -m 0444 ${B}/usr/initramfs-mine-${MACHINE_ARCH}.cpio ${D}/usr/
}
====================================================================
Here is my initramfs bb file
LICENSE = "GPLv2"
PACKAGE_INSTALL = "initramfs-live-boot ${VIRTUAL-RUNTIME_base-utils} udev ${ROOTFS_BOOTSTRAP_INSTALL}"
IMAGE_FSTYPES = "${INITRAMFS_FSTYPES}"
inherit core-image
====================================================================
I have found similar questions:
Ship extra files in kernel module recipe and
An example of using FILES_${PN}
The way in aboves discussion are not work...
Any information would be appreciate !!
Thanks !!
The error seems to QA issues it means the source is compiled but not adding to rootfs. Add below line to yourkernel-image.bb. it will solve the issue.
FILES_${PN} += "${exec_prefix}/*"
Note: may be In your kernel.bb file you have given wrong format
I have a Veracode plugin in my VS 2013 Professional.
I have ucommerce.dll, Sitecore.Kernel and Sitecore.Analytics.dll
I set copy local true for all above dll files.
When i tried to pre-compile all the web project I'm getting a below error message
1>------ Pre-compile started: Project: XXXXX.Web.PQRPorta\ ------
1>Pre-compiling with command similar to the following:
C:\Windows\Microsoft.NET\Framework\v4.0.30319\aspnet_compiler.exe -p
"C:/XXXXX.Web.PQRPortal" -v "XXXXX.Web.PQRPortal/" -fixednames -f -c
-d "C:/SVN/trunk/Releases/SourceCode/Source/PrecompiledWeb/XXXXX.Web.PQRPortal"
1>error ASPCONFIG: Could not autodiscover 'components.config'. Make
sure it's present in the application folder
'C:\SVN\trunk\Releases\SourceCode\Source\XXXXX.Web.PQRPortal\' or in a
sub folder. Paths ignored
''C:\SVN\trunk\Releases\SourceCode\Source\XXXXX.Web.PQRPortal\bin',
'C:\SVN\trunk\Releases\SourceCode\Source\XXXXX.Web.PQRPortal\App_Data',
'C:\SVN\trunk\Releases\SourceCode\Source\XXXXX.Web.PQRPortal\obj''
1>XXXXX.Web.PQRPortal\ - 1 error, 0 warnings
Is there any configuration missing?
Update
I found the components.config file inside
C:\inetpub\wwwroot\XXXX\Website\sitecore modules\Shell\uCommerce\Configuration
and I added the file inside the web project root directory and tried to precompile web project, now I’m getting different error error
ASPRUNTIME: Type is not resolved for member 'Castle.Windsor.Configuration.Interpreters.ConfigurationProcessingException,Castle.Windsor, Version=3.2.0.0, Culture=neutral, PublicKeyToken=407dd0808d44fbdc'.
any solution for it?
The components.config is a file uCommerce need.
The configuration file should be placed somewhere below the uCommerce folder. (not sure where depend on the version) It will automatically be picked up when the application starts up.