I have 2 folders: folder_a & folder_b. In each of these folders there are a bunch of files. I am trying to use sed to move all of these files out of these folders and into my current working directory I am currently in.
My folder structure looks like this:
mytest:
a:
1.txt
2.txt
3.txt
b:
4.txt
5.txt
The command I am trying to use is:
find . -type d ! -iname '*.*' # find all folders other than root
| sed -r 's/.*/&\/*/' # add '/*' to each of the arguments
| sed -r 'p;s/.*/./' # output: a/* . b/* .
| xargs -n 2 mv # should be creating two commands: 'mv a/* .' and 'mv b/* .'
Unfortunately I get an error:
mv: cannot stat './aaa/*': No such file or directory
I also get the same error when I try this other strategy (using ls instead of mv):
for dir in */; do
ls $dir;
done;
Even if I use sed to replace the spaces in each directory name with '\ ', or surround the directory names with quotes I get the same error.
I'm not sure if these 2 examples are related in my misunderstanding of bash but they both seem to demonstrate my ignorance of how bash translates the output from one command into the input of another command.
Can anyone shed some light on this?
Update: Completely rewritten.
As #EtanReisner and #melpomene have noted, mv */* . or, more specifically, mv a/* b/* . is the most straightforward solution, but you state that this is in part a learning exercise, so the remainder of the answer shows an efficient find-based solution and explains the problem with the original command.
An efficient find-based solution
Generally, if feasible, it's best and most efficient to let find itself do the work, without involving additional tools; find's -exec action is like a built-in xargs, with {} representing the path at hand (with terminator \;) / all paths (with +):
find . -type f -exec echo mv -t . {} +
To be safe, his will just print the mv commands that would be executed; remove the echo to actually execute them.
This will execute a single[1] mv command to which all matching files are passed, and -t . moves them all to the current dir.
[1] If the resulting command line is too long (which is unlikely), it is split up into multiple commands, just as with xargs.
Operating on files (-type f) bypasses the need for globbing, as find will then enumerate all files for you (it also bypasses the need to exclude . explicitly).
Note that this solution works on entire subtrees, not just (immediate) subdirectories.
It's tempting to consider turning on Bash 4's globstar option and using mv */** ., but that won't work, because it will attempt to move directories as well, not just the files in them.
A caveat re -exec with +: it only works if {} - the placeholder for all paths - is the token immediately before the +.
Since you're on Linux, we can satisfy this condition by specifying the target folder for mv with option -t before the {}; on BSD-based systems such as OSX, you could not do that, because mv doesn't support -t there, so you'd have to use terminator \;, which means that mv is called once for every path, which is obviously much slower.
Why your command didn't work:
As #EtanReisner points out in a comment, xargs invokes the command specified without (implicitly) involving a shell, so globbing won't work; you can verify this with the following command:
echo '*' | xargs echo # -> '*' - NO globbing
If we leave the globbing issue aside, additional work would have been necessary to make your xargs command work correctly with folder names with embedded spaces (or other shell metacharacters):
find . -mindepth 1 -type d |
sed -r "s/.*/'&'\/* ./" | # -> '<input-path>'/* . (including single-quotes)
xargs -n 2 echo mv # NOTE: still won't work due to lack of globbing
Note how the (combined) sed command now produces a single output line '<input-path>'/* ., with the input path enclosed in embedded single-quotes, which is required for xargs to recognize <input-path> as a single argument, even if it contains embedded spaces.
(If your filenames contain single-quotes, you'd have to do more work; also note that since now all arguments for a given dir. are on a single line, you could use xargs -L 1 ....)
Also note how -mindepth 1 (only process paths at the subdirectory level or below) is used to skip processing of . itself.
The only way to make globbing happen is to get the shell involved:
find . -mindepth 1 -type d |
sed -r "s/.*/'&'\/* ./" | # -> '<input-path>'/* . (including single-quotes)
xargs -I {} sh -c 'echo mv {}' # works, but is inefficient
Note the use of xargs' -I option to treat each input line as its own argument ({} is a self-chosen placeholder for the input).
sh -c invokes the (default) shell to execute the resulting command, at which globbing does happen.
However, overall, this is quite inefficient:
A pipeline with 3 segments is used.
A shell instance is invoked for every input path, which in turn calls the mv utility.
Compare this to the efficient find-only solution above, which (typically) creates only 2 processes in total.
In a shell script, I want to remove all files and directories but one file, in the current directory.
I used
ls | grep -v 'nameoffiletokeep' | xargs rm
this removes files, but directories are not deleted.
find . -mindepth 1 -maxdepth 1 ! -iname nameoffiletokeep -print0| xargs -0 rm -rf;
This finds all files and directories that are direct children of the current working directory that are not named nameoffiletokeep and removes them all (recursively for directories), regardless of leading dots (e.g. .hidden, which would be missed if you used a glob like rm -rf *), spaces, or other metachars in the file names.
I've used -iname for case-insensitive matching against nameoffiletokeep, but if you want case-sensitivity, you should use -name. The choice should depend on the underlying file system behavior, and your awareness of the letter-case of the file name you're trying to protect.
If you are using bash, you can use extended globbing:
shopt -s extglob
rm -fr !(nameoffiletokeep)
In zsh the same idea is possible:
setopt extended_glob
rm -fr ^nameoffiletokeep
I want to copy recursively files to its parent folder for a specific file extension. For example:
./folderA/folder1/*.txt to ./folderA/*.txt
./folderB/folder2/*.txt to ./folderB/*.txt
etc.
I checked cp and find commands but couldn't get it working.
I suspect that while you say copy, you actually mean to move the files up to their respective parent directories. It can be done easily using find:
$ find . -name '*.txt' -type f -execdir mv -n '{}' ../ \;
The above command recurses into the current directory . and then applies the following cascade of conditionals to each item found:
-name '*.txt' will filter out only files that have the .txt extension
-type f will filter out only regular files (eg, not directories that – for whatever reason – happen to have a name ending in .txt)
-execdir mv -n '{}' ../ \; executes the command mv -n '{}' ../ in the containing directory where the {} is a placeholder for the matched file's name and the single quotes are needed to stop the shell from interpreting the curly braces. The ; terminates the command and again has to be escaped from the shell interpreting it.
I have passed the -n flag to the mv program to avoid accidentally overwriting an existing file.
The above command will transform the following file system tree
dir1/
dir11/
file3.txt
file4.txt
dir12/
file2.txt
dir2/
dir21/
file6.dat
dir22/
dir221/
dir221/file8.txt
file7.txt
file5.txt
dir3/
file9.dat
file1.txt
into this one:
dir1/
dir11/
dir12/
file3.txt
file4.txt
dir2/
dir21/
file6.dat
dir22/
dir221/
file8.txt
file7.txt
dir3/
file9.dat
file2.txt
file5.txt
To get rid of the empty directories, run
$ find . -type d -empty -delete
Again, this command will traverse the current directory . and then apply the following:
-type d this time filters out only directories
-empty filters out only those that are empty
-delete deletes them.
Fine print: -execdir is not specified by POSIX, though major implementations (at least the GNU and BSD one) support it. If you need strict POSIX compliance, you'll have to make do with the less safe -exec which would need additional thought to be applied correctly in this case.
Finally, please try your commands in a test directory with dummy files, not your actual data. Especially with the -delete option of find, you can loose all your data quicker than you might imaging. Read the man page and, if that is not enough, the reference manual of find. Never blindly copy shell commands from random strangers posted on the internet if you don't understand them.
$cp ./folderA/folder1/*.txt ./folderA
Try this commnad
Run something like this from the root(ish) directory:
#! /bin/bash
BASE_DIR=./
new_dir() {
LOC_DIR=`pwd`
for i in "${LOC_DIR}"/*; do
[[ -f "${i}" ]] && cp "${i}" ../
[[ -d "${i}" ]] && cd "${i}" && new_dir
cd ..
done
return 0
}
new_dir
This will search each directory. When a file is encountered, it copies the file up a directory. When a directory is found, it will move down into the directory and start the process over again. I think it'll work for you.
Good luck.
I have several hundred PDFs under a directory in UNIX. The names of the PDFs are really long (approx. 60 chars).
When I try to delete all PDFs together using the following command:
rm -f *.pdf
I get the following error:
/bin/rm: cannot execute [Argument list too long]
What is the solution to this error?
Does this error occur for mv and cp commands as well? If yes, how to solve for these commands?
The reason this occurs is because bash actually expands the asterisk to every matching file, producing a very long command line.
Try this:
find . -name "*.pdf" -print0 | xargs -0 rm
Warning: this is a recursive search and will find (and delete) files in subdirectories as well. Tack on -f to the rm command only if you are sure you don't want confirmation.
You can do the following to make the command non-recursive:
find . -maxdepth 1 -name "*.pdf" -print0 | xargs -0 rm
Another option is to use find's -delete flag:
find . -name "*.pdf" -delete
tl;dr
It's a kernel limitation on the size of the command line argument. Use a for loop instead.
Origin of problem
This is a system issue, related to execve and ARG_MAX constant. There is plenty of documentation about that (see man execve, debian's wiki, ARG_MAX details).
Basically, the expansion produce a command (with its parameters) that exceeds the ARG_MAX limit.
On kernel 2.6.23, the limit was set at 128 kB. This constant has been increased and you can get its value by executing:
getconf ARG_MAX
# 2097152 # on 3.5.0-40-generic
Solution: Using for Loop
Use a for loop as it's recommended on BashFAQ/095 and there is no limit except for RAM/memory space:
Dry run to ascertain it will delete what you expect:
for f in *.pdf; do echo rm "$f"; done
And execute it:
for f in *.pdf; do rm "$f"; done
Also this is a portable approach as glob have strong and consistant behavior among shells (part of POSIX spec).
Note: As noted by several comments, this is indeed slower but more maintainable as it can adapt more complex scenarios, e.g. where one want to do more than just one action.
Solution: Using find
If you insist, you can use find but really don't use xargs as it "is dangerous (broken, exploitable, etc.) when reading non-NUL-delimited input":
find . -maxdepth 1 -name '*.pdf' -delete
Using -maxdepth 1 ... -delete instead of -exec rm {} + allows find to simply execute the required system calls itself without using an external process, hence faster (thanks to #chepner comment).
References
I'm getting "Argument list too long". How can I process a large list in chunks? # wooledge
execve(2) - Linux man page (search for ARG_MAX) ;
Error: Argument list too long # Debian's wiki ;
Why do I get “/bin/sh: Argument list too long” when passing quoted arguments? # SuperUser
find has a -delete action:
find . -maxdepth 1 -name '*.pdf' -delete
Another answer is to force xargs to process the commands in batches. For instance to delete the files 100 at a time, cd into the directory and run this:
echo *.pdf | xargs -n 100 rm
If you’re trying to delete a very large number of files at one time (I deleted a directory with 485,000+ today), you will probably run into this error:
/bin/rm: Argument list too long.
The problem is that when you type something like rm -rf *, the * is replaced with a list of every matching file, like “rm -rf file1 file2 file3 file4” and so on. There is a relatively small buffer of memory allocated to storing this list of arguments and if it is filled up, the shell will not execute the program.
To get around this problem, a lot of people will use the find command to find every file and pass them one-by-one to the “rm” command like this:
find . -type f -exec rm -v {} \;
My problem is that I needed to delete 500,000 files and it was taking way too long.
I stumbled upon a much faster way of deleting files – the “find” command has a “-delete” flag built right in! Here’s what I ended up using:
find . -type f -delete
Using this method, I was deleting files at a rate of about 2000 files/second – much faster!
You can also show the filenames as you’re deleting them:
find . -type f -print -delete
…or even show how many files will be deleted, then time how long it takes to delete them:
root#devel# ls -1 | wc -l && time find . -type f -delete
100000
real 0m3.660s
user 0m0.036s
sys 0m0.552s
Or you can try:
find . -name '*.pdf' -exec rm -f {} \;
you can try this:
for f in *.pdf
do
rm "$f"
done
EDIT:
ThiefMaster comment suggest me not to disclose such dangerous practice to young shell's jedis, so I'll add a more "safer" version (for the sake of preserving things when someone has a "-rf . ..pdf" file)
echo "# Whooooo" > /tmp/dummy.sh
for f in '*.pdf'
do
echo "rm -i \"$f\""
done >> /tmp/dummy.sh
After running the above, just open the /tmp/dummy.sh file in your favorite editor and check every single line for dangerous filenames, commenting them out if found.
Then copy the dummy.sh script in your working dir and run it.
All this for security reasons.
For somone who doesn't have time.
Run the following command on terminal.
ulimit -S -s unlimited
Then perform cp/mv/rm operation.
I'm surprised there are no ulimit answers here. Every time I have this problem I end up here or here. I understand this solution has limitations but ulimit -s 65536 seems to often do the trick for me.
You could use a bash array:
files=(*.pdf)
for((I=0;I<${#files[#]};I+=1000)); do
rm -f "${files[#]:I:1000}"
done
This way it will erase in batches of 1000 files per step.
you can use this commend
find -name "*.pdf" -delete
The rm command has a limitation of files which you can remove simultaneous.
One possibility you can remove them using multiple times the rm command bases on your file patterns, like:
rm -f A*.pdf
rm -f B*.pdf
rm -f C*.pdf
...
rm -f *.pdf
You can also remove them through the find command:
find . -name "*.pdf" -exec rm {} \;
If they are filenames with spaces or special characters, use:
find -name "*.pdf" -delete
For files in current directory only:
find -maxdepth 1 -name '*.pdf' -delete
This sentence search all files in the current directory (-maxdepth 1) with extension pdf (-name '*.pdf'), and then, delete.
i was facing same problem while copying form source directory to destination
source directory had files ~3 lakcs
i used cp with option -r and it's worked for me
cp -r abc/ def/
it will copy all files from abc to def without giving warning of Argument list too long
Try this also If you wanna delete above 30/90 days (+) or else below 30/90(-) days files/folders then you can use the below ex commands
Ex: For 90days excludes above after 90days files/folders deletes, it means 91,92....100 days
find <path> -type f -mtime +90 -exec rm -rf {} \;
Ex: For only latest 30days files that you wanna delete then use the below command (-)
find <path> -type f -mtime -30 -exec rm -rf {} \;
If you wanna giz the files for more than 2 days files
find <path> -type f -mtime +2 -exec gzip {} \;
If you wanna see the files/folders only from past one month .
Ex:
find <path> -type f -mtime -30 -exec ls -lrt {} \;
Above 30days more only then list the files/folders
Ex:
find <path> -type f -mtime +30 -exec ls -lrt {} \;
find /opt/app/logs -type f -mtime +30 -exec ls -lrt {} \;
And another one:
cd /path/to/pdf
printf "%s\0" *.[Pp][Dd][Ff] | xargs -0 rm
printf is a shell builtin, and as far as I know it's always been as such. Now given that printf is not a shell command (but a builtin), it's not subject to "argument list too long ..." fatal error.
So we can safely use it with shell globbing patterns such as *.[Pp][Dd][Ff], then we pipe its output to remove (rm) command, through xargs, which makes sure it fits enough file names in the command line so as not to fail the rm command, which is a shell command.
The \0 in printf serves as a null separator for the file names wich are then processed by xargs command, using it (-0) as a separator, so rm does not fail when there are white spaces or other special characters in the file names.
Argument list too long
As this question title for cp, mv and rm, but answer stand mostly for rm.
Un*x commands
Read carefully command's man page!
For cp and mv, there is a -t switch, for target:
find . -type f -name '*.pdf' -exec cp -ait "/path to target" {} +
and
find . -type f -name '*.pdf' -exec mv -t "/path to target" {} +
Script way
There is an overall workaroung used in bash script:
#!/bin/bash
folder=( "/path to folder" "/path to anther folder" )
if [ "$1" != "--run" ] ;then
exec find "${folder[#]}" -type f -name '*.pdf' -exec $0 --run {} +
exit 0;
fi
shift
for file ;do
printf "Doing something with '%s'.\n" "$file"
done
What about a shorter and more reliable one?
for i in **/*.pdf; do rm "$i"; done
I had the same problem with a folder full of temporary images that was growing day by day and this command helped me to clear the folder
find . -name "*.png" -mtime +50 -exec rm {} \;
The difference with the other commands is the mtime parameter that will take only the files older than X days (in the example 50 days)
Using that multiple times, decreasing on every execution the day range, I was able to remove all the unnecessary files
You can create a temp folder, move all the files and sub-folders you want to keep into the temp folder then delete the old folder and rename the temp folder to the old folder try this example until you are confident to do it live:
mkdir testit
cd testit
mkdir big_folder tmp_folder
touch big_folder/file1.pdf
touch big_folder/file2.pdf
mv big_folder/file1,pdf tmp_folder/
rm -r big_folder
mv tmp_folder big_folder
the rm -r big_folder will remove all files in the big_folder no matter how many. You just have to be super careful you first have all the files/folders you want to keep, in this case it was file1.pdf
To delete all *.pdf in a directory /path/to/dir_with_pdf_files/
mkdir empty_dir # Create temp empty dir
rsync -avh --delete --include '*.pdf' empty_dir/ /path/to/dir_with_pdf_files/
To delete specific files via rsync using wildcard is probably the fastest solution in case you've millions of files. And it will take care of error you're getting.
(Optional Step): DRY RUN. To check what will be deleted without deleting. `
rsync -avhn --delete --include '*.pdf' empty_dir/ /path/to/dir_with_pdf_files/
.
.
.
Click rsync tips and tricks for more rsync hacks
I found that for extremely large lists of files (>1e6), these answers were too slow. Here is a solution using parallel processing in python. I know, I know, this isn't linux... but nothing else here worked.
(This saved me hours)
# delete files
import os as os
import glob
import multiprocessing as mp
directory = r'your/directory'
os.chdir(directory)
files_names = [i for i in glob.glob('*.{}'.format('pdf'))]
# report errors from pool
def callback_error(result):
print('error', result)
# delete file using system command
def delete_files(file_name):
os.system('rm -rf ' + file_name)
pool = mp.Pool(12)
# or use pool = mp.Pool(mp.cpu_count())
if __name__ == '__main__':
for file_name in files_names:
print(file_name)
pool.apply_async(delete_files,[file_name], error_callback=callback_error)
If you want to remove both files and directories, you can use something like:
echo /path/* | xargs rm -rf
I only know a way around this.
The idea is to export that list of pdf files you have into a file. Then split that file into several parts. Then remove pdf files listed in each part.
ls | grep .pdf > list.txt
wc -l list.txt
wc -l is to count how many line the list.txt contains. When you have the idea of how long it is, you can decide to split it in half, forth or something. Using split -l command
For example, split it in 600 lines each.
split -l 600 list.txt
this will create a few file named xaa,xab,xac and so on depends on how you split it.
Now to "import" each list in those file into command rm, use this:
rm $(<xaa)
rm $(<xab)
rm $(<xac)
Sorry for my bad english.
I ran into this problem a few times. Many of the solutions will run the rm command for each individual file that needs to be deleted. This is very inefficient:
find . -name "*.pdf" -print0 | xargs -0 rm -rf
I ended up writing a python script to delete the files based on the first 4 characters in the file-name:
import os
filedir = '/tmp/' #The directory you wish to run rm on
filelist = (os.listdir(filedir)) #gets listing of all files in the specified dir
newlist = [] #Makes a blank list named newlist
for i in filelist:
if str((i)[:4]) not in newlist: #This makes sure that the elements are unique for newlist
newlist.append((i)[:4]) #This takes only the first 4 charcters of the folder/filename and appends it to newlist
for i in newlist:
if 'tmp' in i: #If statment to look for tmp in the filename/dirname
print ('Running command rm -rf '+str(filedir)+str(i)+'* : File Count: '+str(len(os.listdir(filedir)))) #Prints the command to be run and a total file count
os.system('rm -rf '+str(filedir)+str(i)+'*') #Actual shell command
print ('DONE')
This worked very well for me. I was able to clear out over 2 million temp files in a folder in about 15 minutes. I commented the tar out of the little bit of code so anyone with minimal to no python knowledge can manipulate this code.
I have faced a similar problem when there were millions of useless log files created by an application which filled up all inodes. I resorted to "locate", got all the files "located"d into a text file and then removed them one by one. Took a while but did the job!
I solved with for
I am on macOS with zsh
I moved thousands only jpg files. Within mv in one line command.
Be sure there are no spaces or special characters in the name of the files you are trying to move
for i in $(find ~/old -type f -name "*.jpg"); do mv $i ~/new; done
A bit safer version than using xargs, also not recursive:
ls -p | grep -v '/$' | grep '\.pdf$' | while read file; do rm "$file"; done
Filtering our directories here is a bit unnecessary as 'rm' won't delete it anyway, and it can be removed for simplicity, but why run something that will definitely return error?
Using GNU parallel (sudo apt install parallel) is super easy
It runs the commands multithreaded where '{}' is the argument passed
E.g.
ls /tmp/myfiles* | parallel 'rm {}'
For remove first 100 files:
rm -rf 'ls | head -100'