I'm SSH-ing from one remote server to another to run a couple of commands. My here-doc runs fine on the destination server but I'm getting this setterm: $TERM is not defined warning even though it is defined as linux on both servers. I tried export TERM=linux before the ssh command and in the Here-Doc.
Here-doc:
ssh -T $DestinationServer <<EOF
export TERM=linux
echo "Successfully SSH into \$HOSTNAME..."
echo \$TERM
*do some stuff*
EOF
Output:
setterm: $TERM is not defined.
Successfully SSH into HOSTNAME..."
linux
How do I fix this? And does this effect other commands in the Here-Doc?
UPDATE
I scrapped the Here-Doc and the setterm error went away. While it fixed my problem, why did the error resolve when I do it this way?
DoesThisExist=$(ssh -T $DestServer "cat $SomeFile" | grep -cim1 $This")
What is a good way to be able to directly send to STDIN and receive from STDOUT of a process? I'm specifically interested in SSH, as I want to do the following:
[ssh into a remote server]
[run remote commands]
[run local commands]
[run remote commands]
etc...
For example, let's say I have a local script "localScript" that will output the next command I want to run remotely, depending on the output of "remoteScript". I could do something like:
output=$(ssh myServer "./remoteScript")
nextCommand=$(./localScript $output)
ssh myServer "$nextCommand"
But it would be nice to do this without closing/reopening the SSH connection at every step.
You can redirect SSH input and output to FIFO-s and then use these for two-way communication.
For example local.sh:
#!/bin/sh
SSH_SERVER="myServer"
# Redirect SSH input and output to temporary named pipes (FIFOs)
SSH_IN=$(mktemp -u)
SSH_OUT=$(mktemp -u)
mkfifo "$SSH_IN" "$SSH_OUT"
ssh "$SSH_SERVER" "./remote.sh" < "$SSH_IN" > "$SSH_OUT" &
# Open the FIFO-s and clean up the files
exec 3>"$SSH_IN"
exec 4<"$SSH_OUT"
rm -f "$SSH_IN" "$SSH_OUT"
# Read and write
counter=0
echo "PING${counter}" >&3
cat <&4 | while read line; do
echo "Remote responded: $line"
sleep 1
counter=$((counter+1))
echo "PING${counter}" >&3
done
And simple remote.sh:
#!/bin/sh
while read line; do
echo "$line PONG"
done
The method you are using works, but I don't think you can reuse the same connection everytime. You can, however, do this using screen, tmux or nohup, but that would greatly increase the complexity of your script because you will now have to emulate keypresses/shortcuts. I'm not even sure if you can if you do directly in bash. If you want to emulate keypresses, you will have to run the script in a new x-terminal and use xdotool to emulate the keypresses.
Another method is to delegate the whole script to the SSH server by just running the script on the remote server itself:
ssh root#MachineB 'bash -s' < local_script.sh
I place this ssh call in the following a shell script on our Linux box named "tstz" and then call it with the linux "at" command in order to schedule it for later execution.
tstz script:
#! /bin/ksh
/usr/bin/ssh -tt <remote windows server> pmcmds ${fl} ${wf} < /dev/null >/tmp/test1.log 2>&1
at command syntax:
at -f tstz now + 1 minute
The ssh call executes remote command as expected, but the ssh connection closes immediately before the remote command has completed. I need the connection to stay open until the remote command has completed and then return control to the tstz script with an exit status.
This is the error I get in the /tmp/test1.log:
tcgetattr: Inappropriate ioctl for device
^[[2JConnection to dc01nj2dwifdv02.nj.core.him closed.^M
NOTE: When using the "at" command to schedule tstz, if I don't use -tt, the ssh command will not execute the remoted command "pmcmds ${fl} ${wf}". I believe this is because a terminal is required. I can however run tstz from the Linux command prompt in the foreground without the -tt on the ssh command line and it runs as expected.
Any help would be greately appreciated. Thanks!
As I understand you need to specify a command to execute on the REMOTE machine after successfully connecting to the server, not on LOCAL machine.
I use following command
ssh -i "key.pem" ec2-user#ec2-XX-XX-XX-XX.us-west-2.compute.amazonaws.com -t 'command; bash -l -c "sudo su"'
where you should replace "sudo su" with your own command, I guess with "pmcmds DFD_ETIME wf_TESTa"
So, try to issue, maybe
/usr/bin/ssh -tt <remote windows server> 'command; bash -l -c "pmcmds DFD_ETIME wf_TESTa"'
P.S. I have discovered interesting service on google called "explainshell"
which helped me to understand that "command;" keyword is crucial inside quotes.
I'm stuck with an exercise. I'm writing a bash script where I need to start execution of bash script on a remote machine and then instantly continue scripts execution. I have tried using this:
ssh user#host 'nohup bash -s > /dev/null 2>&1&' < local_script.sh
This however seems to be doing nothing. I have searched the web and can't find answer. All help will be highly appreciated.
I think you need to leave the ssh session open for this to work properly. If the ssh session closes then the remote process looses it's stdin. So bash won't be able to read load_script.sh before ssh closes.
ssh user#host 'bash -s > /dev/null 2>&1' < local_script.sh &
Anything else requires you to send the script first, then kick it off.
This is a follow-on question to the How do you use ssh in a shell script? question. If I want to execute a command on the remote machine that runs in the background on that machine, how do I get the ssh command to return? When I try to just include the ampersand (&) at the end of the command it just hangs. The exact form of the command looks like this:
ssh user#target "cd /some/directory; program-to-execute &"
Any ideas? One thing to note is that logins to the target machine always produce a text banner and I have SSH keys set up so no password is required.
I had this problem in a program I wrote a year ago -- turns out the answer is rather complicated. You'll need to use nohup as well as output redirection, as explained in the wikipedia artcle on nohup, copied here for your convenience.
Nohuping backgrounded jobs is for
example useful when logged in via SSH,
since backgrounded jobs can cause the
shell to hang on logout due to a race
condition [2]. This problem can also
be overcome by redirecting all three
I/O streams:
nohup myprogram > foo.out 2> foo.err < /dev/null &
This has been the cleanest way to do it for me:-
ssh -n -f user#host "sh -c 'cd /whereever; nohup ./whatever > /dev/null 2>&1 &'"
The only thing running after this is the actual command on the remote machine
Redirect fd's
Output needs to be redirected with &>/dev/null which redirects both stderr and stdout to /dev/null and is a synonym of >/dev/null 2>/dev/null or >/dev/null 2>&1.
Parantheses
The best way is to use sh -c '( ( command ) & )' where command is anything.
ssh askapache 'sh -c "( ( nohup chown -R ask:ask /www/askapache.com &>/dev/null ) & )"'
Nohup Shell
You can also use nohup directly to launch the shell:
ssh askapache 'nohup sh -c "( ( chown -R ask:ask /www/askapache.com &>/dev/null ) & )"'
Nice Launch
Another trick is to use nice to launch the command/shell:
ssh askapache 'nice -n 19 sh -c "( ( nohup chown -R ask:ask /www/askapache.com &>/dev/null ) & )"'
If you don't/can't keep the connection open you could use screen, if you have the rights to install it.
user#localhost $ screen -t remote-command
user#localhost $ ssh user#target # now inside of a screen session
user#remotehost $ cd /some/directory; program-to-execute &
To detach the screen session: ctrl-a d
To list screen sessions:
screen -ls
To reattach a session:
screen -d -r remote-command
Note that screen can also create multiple shells within each session. A similar effect can be achieved with tmux.
user#localhost $ tmux
user#localhost $ ssh user#target # now inside of a tmux session
user#remotehost $ cd /some/directory; program-to-execute &
To detach the tmux session: ctrl-b d
To list screen sessions:
tmux list-sessions
To reattach a session:
tmux attach <session number>
The default tmux control key, 'ctrl-b', is somewhat difficult to use but there are several example tmux configs that ship with tmux that you can try.
I just wanted to show a working example that you can cut and paste:
ssh REMOTE "sh -c \"(nohup sleep 30; touch nohup-exit) > /dev/null &\""
You can do this without nohup:
ssh user#host 'myprogram >out.log 2>err.log &'
Quickest and easiest way is to use the 'at' command:
ssh user#target "at now -f /home/foo.sh"
I think you'll have to combine a couple of these answers to get what you want. If you use nohup in conjunction with the semicolon, and wrap the whole thing in quotes, then you get:
ssh user#target "cd /some/directory; nohup myprogram > foo.out 2> foo.err < /dev/null"
which seems to work for me. With nohup, you don't need to append the & to the command to be run. Also, if you don't need to read any of the output of the command, you can use
ssh user#target "cd /some/directory; nohup myprogram > /dev/null 2>&1"
to redirect all output to /dev/null.
This worked for me may times:
ssh -x remoteServer "cd yourRemoteDir; ./yourRemoteScript.sh </dev/null >/dev/null 2>&1 & "
You can do it like this...
sudo /home/script.sh -opt1 > /tmp/script.out &
It appeared quite convenient for me to have a remote tmux session using the tmux new -d <shell cmd> syntax like this:
ssh someone#elsewhere 'tmux new -d sleep 600'
This will launch new session on elsewhere host and ssh command on local machine will return to shell almost instantly. You can then ssh to the remote host and tmux attach to that session. Note that there's nothing about local tmux running, only remote!
Also, if you want your session to persist after the job is done, simply add a shell launcher after your command, but don't forget to enclose in quotes:
ssh someone#elsewhere 'tmux new -d "~/myscript.sh; bash"'
Actually, whenever I need to run a command on a remote machine that's complicated, I like to put the command in a script on the destination machine, and just run that script using ssh.
For example:
# simple_script.sh (located on remote server)
#!/bin/bash
cat /var/log/messages | grep <some value> | awk -F " " '{print $8}'
And then I just run this command on the source machine:
ssh user#ip "/path/to/simple_script.sh"
If you run remote command without allocating tty, redirect stdout/stderr works, nohup is not necessary.
ssh user#host 'background command &>/dev/null &'
If you use -t to allocate tty to run interactive command along with background command, and background command is the last command, like this:
ssh -t user#host 'bash -c "interactive command; nohup backgroud command &>/dev/null &"'
It's possible that background command doesn't actually start. There's race here:
bash exits after nohup starts. As a session leader, bash exit results in HUP signal sent to nohup process.
nohup ignores HUP signal.
If 1 completes before 2, the nohup process will exit and won't start the background command at all. We need to wait nohup start the background command. A simple workaroung is to just add a sleep:
ssh -t user#host 'bash -c "interactive command; nohup backgroud command &>/dev/null & sleep 1"'
The question was asked and answered years ago, I don't know if openssh behavior changed since then. I was testing on:
OpenSSH_8.6p1, OpenSSL 1.1.1g FIPS 21 Apr 2020
I was trying to do the same thing, but with the added complexity that I was trying to do it from Java. So on one machine running java, I was trying to run a script on another machine, in the background (with nohup).
From the command line, here is what worked: (you may not need the "-i keyFile" if you don't need it to ssh to the host)
ssh -i keyFile user#host bash -c "\"nohup ./script arg1 arg2 > output.txt 2>&1 &\""
Note that to my command line, there is one argument after the "-c", which is all in quotes. But for it to work on the other end, it still needs the quotes, so I had to put escaped quotes within it.
From java, here is what worked:
ProcessBuilder b = new ProcessBuilder("ssh", "-i", "keyFile", "bash", "-c",
"\"nohup ./script arg1 arg2 > output.txt 2>&1 &\"");
Process process = b.start();
// then read from process.getInputStream() and close it.
It took a bit of trial & error to get this working, but it seems to work well now.
YOUR-COMMAND &> YOUR-LOG.log &
This should run the command and assign a process id you can simply tail -f YOUR-LOG.log to see results written to it as they happen. you can log out anytime and the process will carry on
If you are using zsh then use program-to-execute &! is a zsh-specific shortcut to both background and disown the process, such that exiting the shell will leave it running.
A follow-on to #cmcginty's concise working example which also shows how to alternatively wrap the outer command in double quotes. This is how the template would look if invoked from within a PowerShell script (which can only interpolate variables from within double-quotes and ignores any variable expansion when wrapped in single quotes):
ssh user#server "sh -c `"($cmd) &>/dev/null </dev/null &`""
Inner double-quotes are escaped with back-tick instead of backslash. This allows $cmd to be composed by the PowerShell script, e.g. for deployment scripts and automation and the like. $cmd can even contain a multi-line heredoc if composed with unix LF.
First follow this procedure:
Log in on A as user a and generate a pair of authentication keys. Do not enter a passphrase:
a#A:~> ssh-keygen -t rsa
Generating public/private rsa key pair.
Enter file in which to save the key (/home/a/.ssh/id_rsa):
Created directory '/home/a/.ssh'.
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /home/a/.ssh/id_rsa.
Your public key has been saved in /home/a/.ssh/id_rsa.pub.
The key fingerprint is:
3e:4f:05:79:3a:9f:96:7c:3b:ad:e9:58:37:bc:37:e4 a#A
Now use ssh to create a directory ~/.ssh as user b on B. (The directory may already exist, which is fine):
a#A:~> ssh b#B mkdir -p .ssh
b#B's password:
Finally append a's new public key to b#B:.ssh/authorized_keys and enter b's password one last time:
a#A:~> cat .ssh/id_rsa.pub | ssh b#B 'cat >> .ssh/authorized_keys'
b#B's password:
From now on you can log into B as b from A as a without password:
a#A:~> ssh b#B
then this will work without entering a password
ssh b#B "cd /some/directory; program-to-execute &"
I think this is what you need:
At first you need to install sshpass on your machine.
then you can write your own script:
while read pass port user ip; do
sshpass -p$pass ssh -p $port $user#$ip <<ENDSSH1
COMMAND 1
.
.
.
COMMAND n
ENDSSH1
done <<____HERE
PASS PORT USER IP
. . . .
. . . .
. . . .
PASS PORT USER IP
____HERE