Kindly help. I am stuck. Graph are getting spikes ..but the value is not showing correctly although SNMP get the value correctly.Please throw some light.
Please provide more information, such as the snmpwalk / snmpget command used as well as the returned output when executed from the command line.
Related
I feel silly asking this.. but its doing my head..
if I use 'https://maps.googleapis.com/maps/api/place/autocomplete/json' and set the input parameter to say - 'Palazzo Cast' I will get about 5 suggestions - none of which will be the one I'm looking for. if I set input to 'Palazzo Castellania' I will get zero results - even though there is a place called this (see below). I've set the region parameter to 'mt'...
If I use 'https://maps.googleapis.com/maps/api/place/findplacefromtext' and set the input parameter to 'Palazzo Castellania' - I will get 'the Ministry of Health' - which is correct - however, if I put a partial string in I'll get only a single candidate which will be something different - there doesn't seem to be a way to get multiple place candidates?
I'm guessing from an API side - I have to do a multi-step process - but it would be good to get some input.
My thoughts:
I start with 'https://maps.googleapis.com/maps/api/place/autocomplete/json' - if I get an empty result, I try 'https://maps.googleapis.com/maps/api/place/findplacefromtext'
if I get a single result from either then I can pass the placeID to the places API to get more detailed data.
Make sense? It feels argly..
Edit
So watching how https://www.google.com.mt/ does it... while typing it uses suggest (and never gives the right answer, just like the API) and then when I hit enter it uses search and gives the correct answer... leading me to the conclusion that there is actually two databases happening!
Basically "its by design".. there is no fix as of Feb 2023.. My thoughts are to cache results and do a first search against that otherwise I'll probably use bing or here
I'm trying to print some RFID tags and retrieve their TIDs to store them in my system and know which tags have been printed. Right now I'm reading the TID and sending it back to my computer (connected via USB with the my ZT421 printer) with the following code:
^RFR,H,0,12,2^FN0^FS^FH_^HV0,24,,_0D_0A,L^FS
^RFW,H,2,12,1^FD17171999ABABABAAAAAAAAAB^FS
This is repeated for each tag that I'm printing. However, when printing 10 tags, I only get 9 TIDs. If after that I try to print 7 tags, I still get 9 TIDs. To be honest I'm a bit lost now, because even trying to use the code examples from the ZPL manual (I've tried the ^RI instruction also) it doesn't seem to work.
The communication with the printer is beeing done through Zebra Setup Utilities' direct communication tool.
I tried to retrieve each printed tag TID with:
^RFR,H,0,12,2^FN0^FS^FH_^HV0,24,,_0D_0A,L^FS
^RFW,H,2,12,1^FD17171999ABABABAAAAAAAAAB^FS
but I always get 9 TIDs.
I also tried getting the TID with the ZPL manual example for the ^RI command:
^XA
^FO20,120^A0N,60^FN0^FS
^RI0,,5^FS
^HV0,,Tag ID:^FS
^XZ
And I got absolutely nothing returned to the computer, just a mssage saying "Tag ID:" and no value shown.
I would really appreciate some help with this...
Thanks in advance!
I've fixed the issue, but I'm going to leave the solution here just in case someone else is facing the same problem.
I thought that maybe it wasn't a code issue, but something related to the computer-printer communication. It turned out to be the case. The Zebra Setup Utilities program has a button that says "options". If you click it, a new screen will open and there you can configure the seconds that the program will wait for the printer response (in this case through USB). By default it's set to 5, i changed this value to 100, which is the maximum. This meant that instead of just printing and retrieving the TIDs of 6-9 tags, now I can do it for about 100.
This is not amazing because in my case it implied creating 25 files for the 2500 tags I had to print and store the TIDs, however it's far better than before.
Good morning,
Commands from the master console are apparently not processed by IMS11. "/DIS A" for example returns nothing to the operator master console. The name of the IMS system is IVP1. I also tried IVP1DIS A and no results.
In IMS1110.PROCLIB(DFSPBIV1) the parms are:
CMDMCS=Y,
CRC=/,
IMSID=IVP1,
There are 4 IMS jobs running
JOBNAMEs : IMS11RL1, IMS11CR1, IMS11DL1 and IMS11RC1
I appreciate any help.
Thank you.
The results from the SDSF command execution:
I found the solution.
After the IMS starts up. There will be a message like "*30 DFS810A IMS READY 22311/2128438 IMS11CR1.IMS11CR1 IVP1".
If you want to send commands to IMS, just Reply to it. For example: R 30,/DIS A
Thank you very much for you support.
I am using container engine, and my pods are hosted there.
I am trying to fetch logs, using log api :
http://localhost:8000/api/v1/namespaces/app-test/pods/designer-0/log?tailLines=100&sinceTime=2017-09-17T10:47:58Z
if i used both the query params separately, it works and show the proper result, but if i am using it simultaneously only the top 100 logs are returning, the sinceTime param is get ignored.
my scenario is, i need a log from a specific time, in a chunk like, 100 lines, 100 lines.. like this.
I am not sure, whether it is a bug, or it is not implemented.
I found this from the api reference manual
https://kubernetes.io/docs/api-reference/v1.6/
tailLines - If set, the number of lines from the end of the logs to
show. If not specified, logs are shown from the creation of the
container or sinceSeconds or sinceTime
So, that means if you specify tailLines, it start from the end. I dont see any option explicitly mentioned other than limitBytes. But you will have to play around with it as it does not guarantee number of lines.
tailLines=X tells the server to start that many lines from the end
sinceTime tells the server to start from the specified time
the options are mutually exclusive
Thanks All,
I have later on recognized that, it is not ignoring the sinceTime, as the TailLines intended functionality is return the lines from the last.
So, if i mentioned the sinceTime= 10 PM yesterday, it will return the records from that time..And if also tailLines, is mentioned, so it will return the recent logs from that chunk.
So, it was working as expected. I need to play with LimitBytes for getting the logs in chunk, from that time, Instead of full logs.
I am trying to run the snmpget code sample in VB.NET available at:
https://github.com/lextm/sharpsnmplib/blob/master/Samples/VB.NET/snmpget/
When I try to run the code, I get the following exception:
http://i.stack.imgur.com/S5s9Z.png
The text on the exception indicates that the length of the string used to instantiate ObjectIdentifier is less than 2. However, this is not the case as seen in the watch window.
Could you let me know:
Any suggestions to fix this error. Am I not passing the command line args correctly?
Could you provide a sample command line argument string for SNMP v3?
Thank you for all the support!
The error message is clear enough that you cannot pass "0", or any other string that contains a single number. A valid OID requires at least two portion, such as "0.0".
https://sharpsnmplib.codeplex.com/wikipage?title=600001&referringTitle=KB
Command line tool usage can be found in KB6000001 and you can find other documentation on CodePlex too,
https://sharpsnmplib.codeplex.com/documentation