There are alot of settings in all the versions of IE & windows, that may cause problems for users attempting to run xbap applications, particulary in fulltrust mode.
I seem to have gathered a long list of such cases during the last year.
However I'm pussled by this one exception, which occurs on a user on one of my systems, and was hoping that maybe someone here could point me in the right direction.
This application runs on all the used version of windows, and IE6 -> IE9, without problems so there is nothing wrong with the deployment/xbap it self.
The user gets the errorlog / stacktrace below. Have anyone of you encountered this vague trace, and know what the issue might be? This user is running IE8 & W7.
The user have the proper certificates installed in trusted root authorities & trusted publishers. The site in question has been added to list of trusted sites. Xbap has been enabled in IE.
URLs, publickeys, appname etc have been scrambeled.
Brgds,
Stian
PLATFORM VERSION INFO
Windows : 6.1.7600.0 (Win32NT)
Common Language Runtime : 2.0.50727.4963
System.Deployment.dll : 2.0.50727.4927 (NetFXspW7.050727-4900)
mscorwks.dll : 2.0.50727.4963 (win7RTMGDR.050727-4900)
dfshim.dll : 4.0.31106.0 (Main.031106-0000)
SOURCES
Deployment url : http://someurl/someapplication.xbap
Application url : http://someurl/Application%20Files/someapplication_1_0_0_29/someapplication.exe.manifest
IDENTITIES
Deployment Identity : someapplication.app, Version=1.0.0.29, Culture=neutral, PublicKeyToken=sometoken, processorArchitecture=msil
Application Identity : someapplication, Version=1.0.0.29, Culture=neutral, PublicKeyToken=sometoken, processorArchitecture=msil, type=win32
APPLICATION SUMMARY
* Online only application.
* Browser-hosted application.
ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later in the log.
* An exception occurred while determining trust. Following failure messages were detected:
+ User has refused to grant required permissions to the application.
* An exception occurred while downloading the application. Following failure messages were detected:
+ The AssertApplicationRequirements method failed. The application cannot be committed.
COMPONENT STORE TRANSACTION FAILURE SUMMARY
No transaction error was detected.
WARNINGS
There were no warnings during this operation.
OPERATION PROGRESS STATUS
No phase information is available.
ERROR DETAILS
Following errors were detected during this operation.
* [01/11/2011 09:16:02] System.Deployment.Application.TrustNotGrantedException (Unknown subtype)
- User has refused to grant required permissions to the application.
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.ApplicationTrust.RequestTrust(SubscriptionState subState, Boolean isShellVisible, Boolean isUpdate, ActivationContext actCtx, TrustManagerContext tmc)
at System.Deployment.Application.DeploymentManager.DetermineTrustCore(Boolean blocking, TrustParams tp)
at System.Deployment.Application.DeploymentManager.DetermineTrust(TrustParams trustParams)
at System.Deployment.Application.InPlaceHostingManager.AssertApplicationRequirements(Boolean grantApplicationTrust)
at System.Deployment.Application.InPlaceHostingManager.AssertApplicationRequirements()
at MS.Internal.AppModel.XappLauncherApp.AssertApplicationRequirementsAsync(Object unused)
* [01/11/2011 09:16:37] System.Deployment.Application.DeploymentException (Unknown subtype)
- The AssertApplicationRequirements method failed. The application cannot be committed.
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.DeploymentManager.WaitForAssertApplicationRequirements()
at System.Deployment.Application.DeploymentManager.SynchronizeCore(Boolean blocking)
at System.Deployment.Application.DeploymentManager.SynchronizeAsyncWorker()
COMPONENT STORE TRANSACTION DETAILS
No transaction information is available.
I should have answered this one when I "solved" the issue.
In the case above there was an issue with the client computer, a change of disk, re-install of OS etc solved the trick.
What the issue was, remains a mystery ;)
Related
I had a problem and dell premium support ran some kind of upgrade or re-install of windows 10 while keeping my files in tack.
The next day, I was working on my MVC project in VS and it loaded ok and debugging got my application to the login page, which means it had to successfully read the Entity Framework Context with LINQ type stuff, and all of a sudden my project started having these errors about reading Entity Framework Context, but only in one method.
Then things got worse, I first tried to close VS and reopen VS. But this time, it said my project had been unloaded. I tried the option to reload the project, but now I was getting errors about "the operation could not be completed. the system cannot find the path specified" and errors having to do with not being able to find the current file highlighted at the top of the VS editor.
After looking up the unload issues in forums, I saw a suggestion to call up my Mbsa.csproj and change to false and to True. Then my project loaded ok - but why did this change? it was always false in my previous backups.
Then , when trying to run my project with VS Debugging, I started getting connection messages like these:
1 - C:\MBSSys\Mbsa\Mbsa 2020\Mbsa.csproj : error : The Web Application Project Mbsa is configured to use IIS. The Web server 'http://localhost:51700/' could not be found.
2 -The connection to 'localhost' failed.
Error: ConnectionRefused (0x274d).
System.Net.Sockets.SocketException No connection could be made because the target machine actively refused it 127.0.0.1:51712
3 - HTTP Error 500.19 - Internal Server Error
The requested page cannot be accessed because the related configuration data for the page is invalid.
Detailed Error Information:
Module IIS Web Core
Notification BeginRequest
Handler Not yet determined
Error Code 0x80070021
Config Error This configuration section cannot be used at this path. This happens when the section is locked at a parent level. Locking is either by default (overrideModeDefault="Deny"), or set explicitly by a location tag with overrideMode="Deny" or the legacy allowOverride="false".
Config File \?\D:\MBSSys\Mbsa\Mbsa 2020\web.config
Requested URL http://localhost:51700/
Physical Path D:\MBSSys\Mbsa\Mbsa 2020
Logon Method Not yet determined
Logon User Not yet determined
Config Source:
163: <validation validateIntegratedModeConfiguration="false" />
164: <handlers>
165: <remove name="ExtensionlessUrlHandler-ISAPI-4.0_32bit" />
4 - Error message:
Server Error in Application "application name"
HTTP Error 500.19 – Internal Server Error
HRESULT: 0x80070021
Description of HRESULT
The requested page cannot be accessed because the related configuration data for the page is invalid.
Cause for HResult code 0x80070021
This problem can occur when the specified portion of the IIS configuration file is locked at a higher configuration level.
Resolution for HResult code 0x80070021
To resolve this problem, unlock the specified section, or do not use it at that level. For more information on configuration locking, see How to Use Locking in IIS 7.0 Configuration.
So I am wondering if anyone else has faced this particular issue,
or, if anyone can give me any appreciated advice here.
Thanks for your time and advice. If you need more clues, just ask.
The seems to happen after installing KB4568831.
https://superuser.com/questions/1575295/windows-updates-kb4568831-kb4562899-break-all-net-applications-hosted-in-iis
I could get rid of the 500.19 errors by manually re-installing some optional windows features that the update apparently removes (see below), but after I got auth-related errors instead. In the end I rolled back KB4568831 to resolve the issue for the time being. Hopefully this gets fixed soon.
According to documentation when trial is expired and user opens the app, a message would be shown. But my app closes after showing splash screen without any message in this case.
There is the same question on the Microsoft's forum, but I can't write anything there (it returns me unexpected error when I try to submit my question) and there is no answer.
I get the following line in my event log:
App failed with error: No applicable app licenses found. See the Microsoft-Windows-Twin/Operational log for additional information.
Additional information:
< Data Name="ErrorCode" >-1058406399< /Data >
This is Microsoft's bug and they promise to fix it. You can get more details on the msdn-forum.
I'm trying to install github for windows when I received this error:
Application cannot be started. Contact the application vendor.
The error log produced this:
PLATFORM VERSION INFO
Windows : 6.2.9200.0 (Win32NT)
Common Language Runtime : 4.0.30319.34014
System.Deployment.dll : 4.0.30319.33440 built by: FX45W81RTMREL
clr.dll : 4.0.30319.34014 built by: FX45W81RTMGDR
dfdll.dll : 4.0.30319.33440 built by: FX45W81RTMREL
dfshim.dll : 6.3.9600.16384 (winblue_rtm.130821-1623)
SOURCES
Deployment url : http://github-windows.s3.amazonaws.com/GitHub.application
ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of http://github-windows.s3.amazonaws.com/GitHub.application resulted in exception. Following failure messages were detected:
+ The referenced assembly is not installed on your system. (Exception from HRESULT: 0x800736B3)
COMPONENT STORE TRANSACTION FAILURE SUMMARY
No transaction error was detected.
WARNINGS
There were no warnings during this operation.
OPERATION PROGRESS STATUS
* [8/22/2014 12:51:27 AM] : Activation of http://github-windows.s3.amazonaws.com/GitHub.application has started.
ERROR DETAILS
Following errors were detected during this operation.
* [8/22/2014 12:51:28 AM] System.Runtime.InteropServices.COMException
- The referenced assembly is not installed on your system. (Exception from HRESULT: 0x800736B3)
- Source: System.Deployment
- Stack trace:
at System.Deployment.Internal.Isolation.IStore.GetAssemblyInformation(UInt32 Flags, IDefinitionIdentity DefinitionIdentity, Guid& riid)
at System.Deployment.Application.ComponentStore.GetSubscriptionStateInternal(DefinitionIdentity subId)
at System.Deployment.Application.SubscriptionStore.GetSubscriptionStateInternal(SubscriptionState subState)
at System.Deployment.Application.SubscriptionState.Validate()
at System.Deployment.Application.SubscriptionStore.CheckAndReferenceApplication(SubscriptionState subState, DefinitionAppId appId, Int64 transactionId)
at System.Deployment.Application.DownloadManager.DownloadDeploymentManifestDirectBypass(SubscriptionStore subStore, Uri& sourceUri, TempFile& tempFile, SubscriptionState& subState, IDownloadNotification notification, DownloadOptions options, ServerInformation& serverInformation)
at System.Deployment.Application.DownloadManager.DownloadDeploymentManifestBypass(SubscriptionStore subStore, Uri& sourceUri, TempFile& tempFile, SubscriptionState& subState, IDownloadNotification notification, DownloadOptions options)
at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
COMPONENT STORE TRANSACTION DETAILS
No transaction information is available.
According to https://status.github.com/messages , there are no issues currently with the servers.
I am on a personal computer so there shouldn't be any issues with the connection. I tried downloading the application directly from http://github-windows.s3.amazonaws.com/GitHub.application , but the result was the same.
I am running Windows 8.1 Pro x64.
Edit 1: Currently I'm working around being unable to install GitHub for Windows by first installing it on another system, then taking the newly installed files from %appdata%\Local\Apps\2.0, and moving them to the system that is having trouble installing. (The full directory is %appdata%\Local\Apps\2.0\EWG9HYRR.BKG\2XKOJCRD.XRD\gith..tion_317444273a93ac29_0002.0002_f44dcb2e9d4cde94).
One of the major caveats of this workaround is that on the problem system, GitHub for Windows will report "This isn't a networked deployed app." and therefor not automatically update.
After contacting support, they emailed me and helped me work through the problem preventing GitHub for windows from installing.
This is a problem with the ClickOnce Application Cache.
Before proceeding make sure that you have connectivity.
Sometimes Firewall may be blocking this *.application
So turn off you firewall for private and public profile and then retry.
If the issue persists, you can use the process specified below.
Hold down the Windows key and type R.
Type in rundll32 %SystemRoot%\system32\dfshim.dll CleanOnlineAppCache in the run dialog and hit Enter.
Then try installing the application.
If that doesn't work, there's a more manual approach to ensuring the cache is cleared - you can delete the ClickOnce Application folder directly. On Windows Vista or higher, this will be the %LocalAppData%\Apps\2.0 directory. Simply delete the %LocalAppData%\Apps\2.0 directory and restart github for windows.
If nothing seems to happen after running the installer, you may need to restart Windows, or explorer.exe (if using the .msi installer, the app may be in: %LocalAppData%\GitHubDesktop)
I had this issue as well installing github on Windows 8 x64, I tried all suggestions above related to removing the 2.0 directory but with no luck. Later I found a blog saying that one guy solved this issue by downloading the installer using Internet Explorer (weird right?) Surprisingly for me, it worked! Hre is the link https://github-windows.s3.amazonaws.com/GitHub.application So I recommend you to do the same, at least IE is worth for something :)
Best
For Windows 8.1 64-Bit,
Go to file Explorer (Shortcut: windows key + E).
Paste this " %LocalAppData%\Apps" (without inverted commas) in you file explorer panel (which displays your current location in file explorer.
Press Enter key.
Delete the folder named 2.0 .
In my case, this worked without a glitch. I Hope this helps you
It worked fine for me. Really deleting the directory worked fine.
If you have problems locating the directory copy directly %LocalAppData%\Apps\2.0 on the explorer window. Delete every folder you find there and it will work.
Great response as it was really annoying for me.
I had this issue today on Windows 10 so the issue is still there. The solution provided by #JoeC above solved my issue. The error I received was:
PLATFORM VERSION INFO
Windows : 10.0.10586.0 (Win32NT)
Common Language Runtime : 4.0.30319.42000
System.Deployment.dll : 4.6.1038.0 built by: NETFXREL2
clr.dll : 4.6.1063.1 built by: NETFXREL3STAGE
dfdll.dll : 4.6.1038.0 built by: NETFXREL2
dfshim.dll : 10.0.10586.0 (th2_release.151029-1700)
SOURCES
Deployment url : http://github-windows.s3.amazonaws.com/GitHub.application
ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of http://github-windows.s3.amazonaws.com/GitHub.application resulted in exception. Following failure messages were detected:
+ The referenced assembly is not installed on your system. (Exception from HRESULT: 0x800736B3)
COMPONENT STORE TRANSACTION FAILURE SUMMARY
No transaction error was detected.
WARNINGS
There were no warnings during this operation.
OPERATION PROGRESS STATUS
* [2016-02-01 06:29:55] : Activation of http://github-windows.s3.amazonaws.com/GitHub.application has started.
ERROR DETAILS
Following errors were detected during this operation.
* [2016-02-01 06:29:56] System.Runtime.InteropServices.COMException
- The referenced assembly is not installed on your system. (Exception from HRESULT: 0x800736B3)
- Source: System.Deployment
- Stack trace:
at System.Deployment.Internal.Isolation.IStore.GetAssemblyInformation(UInt32 Flags, IDefinitionIdentity DefinitionIdentity, Guid& riid)
at System.Deployment.Internal.Isolation.Store.GetAssemblyManifest(UInt32 Flags, IDefinitionIdentity DefinitionIdentity)
at System.Deployment.Application.ComponentStore.GetAssemblyManifest(DefinitionIdentity asmId)
at System.Deployment.Application.ComponentStore.GetSubscriptionStateInternal(DefinitionIdentity subId)
at System.Deployment.Application.SubscriptionStore.GetSubscriptionStateInternal(SubscriptionState subState)
at System.Deployment.Application.SubscriptionStore.CheckAndReferenceApplication(SubscriptionState subState, DefinitionAppId appId, Int64 transactionId)
at System.Deployment.Application.DownloadManager.DownloadDeploymentManifestDirectBypass(SubscriptionStore subStore, Uri& sourceUri, TempFile& tempFile, SubscriptionState& subState, IDownloadNotification notification, DownloadOptions options, ServerInformation& serverInformation)
at System.Deployment.Application.DownloadManager.DownloadDeploymentManifestBypass(SubscriptionStore subStore, Uri& sourceUri, TempFile& tempFile, SubscriptionState& subState, IDownloadNotification notification, DownloadOptions options)
at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
COMPONENT STORE TRANSACTION DETAILS
No transaction information is available.
I see answers here and understand that i did dumb thing.
I just made small script that copied all tmp files during installation.
Made small Windows copygithub.cmd file:
:loop
xcopy C:\Users\Stall\AppData\Local\Temp\Deployment C:\github /y /h /i /s
goto loop
Its just a copy in a loop. Start it before install github. And close after you receive an error.
Once it get a fail, all files are erased. So i didn't want to miss any file. This copy is in infinity loop. So you should stop it after you got error.
It does not solve issue, but i received working github.
That's what i wanted.
The problem we had was that a third-party security application that controlled our corporate firewall on each device was blocking ClickOnce from accessing dfshim.dll over WiFi, so one potential solution for us was to have our inspectors start the .NET application while connected via ethernet and then after the app was booted up they could go out and perform their inspections.
I'm running into a problem with getting SSL to work in the Development Fabric. I'm running a clean install of Windows 8 Pro with Visual Studio 2012 Ultimate and the October 2012 Azure SDK for .NET. IIS8 is not installed, only IIS Express, which claims to support HTTPS so I'm hoping that's not the issue.
Running VS 12 as administrator, I've created a blank VS solution, added a new (.NET 4.5) cloud service with a new ASP.NET MVC 4 Internet web application project, and hit F5. Everything works fine. Then, when I add an SSL certificate to the web role and replace the HTTP endpoint (port 80) with an HTTPS endpoint (port 443, with the certificate), hitting F5 produces the following error message:
Windows Azure Tools for Microsoft Visual Studio
There was an error attaching the debugger to the role instance 'deployment18(32).WindowsAzureCloudService.Mvc4WebRole_IN_0' with Process Id: 4892'. Unable to attach. Access is denied.
Note, the last part ("Access is denied") comes in a few variations, a particularly pleasant one being "Catastrophic failure". :)
The only message in the VS Output window ('General' output) is:
Windows Azure Tools: Warning: Remapping private port 443 to 444 in role 'Mvc4WebRole' to avoid conflict during emulation.
The Compute Emulator UI is not much help; just before the instance disappears, this is the only console output that I get consistently (sometimes other messages appear, but sporadically every few runs; I'm not sure how to capture these):
[fabric] Role Instance: deployment18(33).WindowsAzureCloudService.Mvc4WebRole.0
[fabric] Role state Unknown
[fabric] Role state Suspended
[fabric] Role state Busy
[fabric] Role state Unhealthy
[fabric] Role state Stopped
The certificate was obtained from a CA and properly imported into the Local Machine/Personal/Certificates store as a .pfx with private key, extended properties, and marked as exportable, for what it's worth.
When I attempt to publish the service to Azure, I get one build (validation) warning about the database connection string (which I assume is irrelevant):
The connection string 'DefaultConnection' is using a local database '(LocalDb)\v11.0' in project 'Mvc4WebRole'. This connection string will not work when you run this application in Windows Azure. To access a different database, you should update the connection string in the web.config file.
Probably more important, the deployment actually fails with the following history in the Windows Azure Activity Log window:
9:00:25 AM - Warning: There are package validation warnings.
9:00:25 AM - Preparing deployment for WindowsAzureCloudService - 1/3/2013 8:59:55 AM with Subscription ID '<...>' using Service Management URL 'https://management.core.windows.net/'...
9:00:25 AM - Connecting...
9:00:26 AM - Object reference not set to an instance of an object.
9:00:26 AM - Deployment failed with a fatal error
Can someone help me troubleshoot this issue? I've rebooted a few times. ;)
Thanks in advance!
EDIT (Jan. 3, 4:44 PM): I have a few ideas that might help me make progress, but some are pretty drastic so any advice would be appreciated:
Is there a way to capture all the output from the Compute Emulator (Dev Fabric) to a log file so I can review it? (System.Diagnostic.Trace calls from my service won't help, since I don't even get as far as the RoleEntryPoint when using HTTPS!) I figured this out; see next edit.
That null pointer exception during the Azure deployment has me worried. Is it worthwhile to try reinstalling the Azure SDK, and if so, how should I go about doing a clean install of it?
Has anyone seen a problem of this sort disappear when switching to using full IIS for the emulator? (That seems unlikely since IIS vs. IIS Express should have no relevance to the Azure deployment.)
EDIT (Jan. 4, 10:15 AM): Bad news: I tried the suggestion to grant Read access to the certificates, but it didn't help in my case. Good news: I managed to capture one of those sporadic messages in the Compute Emulator UI before it shut down; it was a bit of info from some diagnostics. Not helpful in and of itself, but it revealed where the Development Fabric was storing its temporary files:
[Diagnostics] Information: C:\Users\Lars\AppData\Local\dftmp\Resources\0005155d-4592-40f4-812e-18793b26576c\directory\DiagnosticStore\Monitor
The GUID portion gets recreated for every deployment, and it is deleted when the deployment goes away (as it always does in my case). But in the parent directory ('dftmp'), there are a few helpful directories that I then monitored during a new deployment: DevFCLogs, DFAgentLogs, and IISConfiguratorLogs. I guess that answers the first question I had yesterday! :)
DFAgentLogs\DFAgent.log: (41KB) No useful information. A bunch of "Failure to read pipe" messages and failures to get the role/deployment instance ID, which I assume are just noise.
DevFCLogs\DevFabric--2013.01.04--<...>.log: (510 KB) No useful information. I skimmed the file and also searched for 'error', 'failure', 'not found', 'certificate', and 'Mvc4WebRole_IN_0'; none of those showed any hints of what was going on.
IISConfiguratorLogs\IISConfigurator.log: (6 KB) Now we're making progress!! :) Can someone tell me what this means? (In the meantime, I'm off ILSpy-hunting... fun fun...)
IISConfigurator Information: 0 : [00006356:00000005, 2013/01/04 16:07:08.915] Using IIS Express appdomain
(...)
IISConfigurator Information: 0 : [00006356:00000005, 2013/01/04 16:07:08.936] Adding binding 127.255.0.0:444: to site deployment18(40).WindowsAzureCloudService.Mvc4WebRole_IN_0_Web
IISConfigurator Information: 0 : [00006356:00000005, 2013/01/04 16:07:10.484] Caught exception
IISConfigurator Information: 0 : [00006356:00000005, 2013/01/04 16:07:10.487] Exception:System.Runtime.InteropServices.COMException (0x800401F3): Invalid class string (Exception from HRESULT: 0x800401F3 (CO_E_CLASSSTRING))
Server stack trace:
at Microsoft.Web.Administration.Interop.IAppHostProperty.get_Value()
at Microsoft.Web.Administration.ConfigurationElement.GetPropertyValue(IAppHostProperty property)
at Microsoft.Web.Administration.Binding.get_CertificateHash()
at Microsoft.Web.Administration.BindingCollection.Add(Binding binding)
at Microsoft.WindowsAzure.ServiceRuntime.IISConfigurator.WasManager.DeploySite(String roleId, WASite roleSite, String appPoolName, String sitePath, String iisLogsRootFolder, String failedRequestLogsRootFolder, List1 bindings, List1 protocols, FileManager fileManager, WAAppPool defaultAppPoolSettings, String roleGuid, String& appPoolSid, List`1 appPoolsAdded, String configPath)
EDIT (Jan. 4, 11 AM): ILSpy wasn't much help; the exception is being thrown at an interop point (we knew that already) while trying to get the hash of a certificate in order to set up the binding (we knew that too). Does anyone know what COM object would need to be registered in order to get a certificate hash for a binding in Microsoft.Web.Administration? Or how I could intercept the interop call to find out? Bonus points if you can tell me why this is happening in the first place. :)
I've had similar problem on two computers. On both cases installing IIS solved the problem.
It seems to be enough to just install the IIS (via add/remove Windows components). You don't need to start using it. The installation changes something and after that my IIS Express started working again with HTTPS from Visual Studio.
There is a discussion on similar issue on MSDN Social:
http://social.msdn.microsoft.com/Forums/nl-NL/windowsazuredevelopment/thread/ad362016-16f6-459a-8022-9307aa5f910e
And the issue has been also raised on Microsoft connect:
https://connect.microsoft.com/VisualStudio/feedback/details/758533
In my case the error in the log files was:
IISConfigurator Information: 0 : [00007644:00000007, 2013.01.17
00:39:18.523] Exception:System.Runtime.InteropServices.COMException
(0x800401F3): Invalid class string (Exception from HRESULT: 0x800401F3
(CO_E_CLASSSTRING))
I found the log files from C:\Users\\AppData\Local\dftmp\IISConfiguratorLogs directory.
When running locally with a private key cert for SSL, you'll need to give the user the emulator app is running under access to the private key. Open mmc.exe and add the Certificates >> Local Computer Snap-In to view your certificate. Right Click on the certificate, then All Tasks >> Manage Private Keys - then add IUSR and Network Service with at least read access.
For deployment to azure, you'll need to upload the certificate to the Cloud Service and make sure the certificate is valid for the domain.
Follow step 11 from http://www.microsoft.com/en-us/download/details.aspx?id=35448. From this SO post
I'm managing Autonomy/Interwoven OpenDeploy Base Server.
OS:RHEL5.3
TSVer.:TeamSite6.7.2
ODVer:OpenDeploy7.1
OpenDeploy Base Server process sometimes hangs up when starting deployment.
following message are out in [od.log]
* glibc detected /var/od-home/OpenDeployNG/jre/bin/java: double free or corruption (!prev): 0xb01721d8 **
does anyone know about this problem?
Teamsite 6.7.1+ doesn't support Vintela (VAS) for users or groups on Linux.
I've seen same error in the iwtrace.log, the fix is to make sure that VAS (Vintela) is not used for authentication of users and groups.