I'm making a small kernel module to provide user-space access to some kernel-mode only features of an ARMv7 chip (specifically, cache control). I'm reading through Linux Device Drivers by Corbet, Rubini, and Hartman. In it they describe how to make a full driver+device+bus. I don't want to create a bus driver at all. In fact the 'driver' that I'm making doesn't really need to match against a device definition at all - it is implicitly matched to the platform's CPU. Can anyone explain to me:
Where in sysfs should my attributes go? Should it be in my module entry under /sysfs/modules/mymodule? /sys/devices/platform seems promising too, and so does /sys/devices/system/cpu.
If there is an existing place where I should put my kobject/attributes, how do I plug it into it? How do I get the necessary kset? All the examples I've seen create a kset and then link to it from the kobject - I haven't seen an API for requesting an existing named kset?
Sorry if this is just impossibly obvious, or if there's some really straightforward and easily discovered example somewhere that I haven't discovered for some reason. Can anyone shed any light on this?
I haven't worked with sysfs much, but I found a simple-looking example that's pretty similar to what you are doing (naturally, it's also under ARM). Take a look at arch/arm/mach-omap1/pm.c, specifically the idle_show/idle_store sysfs file. It gets registered (using sysfs_create_file()) as /sys/power/sleep_while_idle and uses the global /sys/power kobj (defined in include/linux/kobject.h). There are a few other global kobj's defined there that you could use, although I'm don't think any are a good fit for your driver.
Is this going to be a platform driver? As a driver that doesn't fit under any bus, it seems like a good fit. Platform drivers get their own directory under /sys/devices/platform, and can have attributes there. Take a look at drivers/hwmon/coretemp.c, which has temp1_crit, temp1_crit_alarm, temp1_input, etc. as attributes. It looks fairly simple: create the attributes (maybe with __ATTR()?), list them all in an array, define an attribute_group, register it with sysfs_create_group() in the probe() function, and unregister it with sysfs_remove_group() in the remove() function.
There are probably other platform drivers that define attributes (search for sysfs_create_group) if you need other examples. Hope this helps!
Related
I have a piece of software that is designed to work with older SATA hard drives and uses a specific ioctl to obtain information from it. Unfortunately I don't have the sources available so I can't just change it. So I wonder is it somehow possible to man in the middle the ioctl and fill out the information myself? This way I can write a simple tool that uses a different mechanism to get the information the tool expects.
Any help is appreciated
My task is to create a program to open and close an electronic valve that is plugged into GPIO ports on my BeagleBone, by using TTL signals.
Questions:
Can I do this?
How do I make an executable file to do this?
Can someone refer me to documentation on this?
Am I going about this in the wrong way?
Thank you.
P.S. If you couldn't already tell I am very new to this.
Yes
There are many ways. It's actually a pretty standard Linux computer and you can use any of a "million" different programming languages to achieve this. This also means you don't have to look for "Beaglebone" specific instructions (beyond the GPIO info below), but your problem is just "How do I write a program that can write text to a file on Linux?". Bonus: This sounds easy and it is easy!
Yes, take a look here for the hardware specific part:
https://github.com/adafruit/adafruit-beaglebone-io-python/issues/157
It describes fairly well both the new and the old sysfs interfaces you can use to manipulate GPIOs.
Depending on the language of your choice, there may already be bindings or a library to abstract this.
No (only based on the information you provided, are there other requirements?)
We all were new at this at some point, don't worry.
Sidenote: It's generally a good idea to make sure that you are running the latest firmware. In case of the BB-Family you can find them here: http://beagleboard.org/latest-images
I have to add a system call in linux kernel that will print the process tree showing only the PIDs to user code. I have to use copy_to_user here. But I am not understanding the use of this function. Could any of u give an example of how it works, including the user-side code and added system code?.....Any easy/simple example would be great for me...:)
Thanks.
I suggest you read through the Linux Device Driver book. It's freely available online at http://lwn.net/Kernel/LDD3/. Although it's geared towards device drivers, it covers most of the key aspects for communicating between kernel and user space and includes multiple examples.
By the way, this sounds like a homework question. If so, your question should have the 'homework' Tag associated with it.
I need some opinions pointers on creating pseudo-filesystems for linux/*nix systems.
Firstly when I say pseudo-filesystem I mean something like /proc where the structure within does not represent actual files on disks or such but the state of the kernel. I would like to try something similar as an interface to an application.
As an example you could say, mount a ftp url to your filesystem and your browser app could then allow you to interact with the remote system doing ls et al on it and translating the standard filesystem requests into ftp ones.
So the first question is: how does one go about doing that? I have read a bit about it and it looks like you need to implement a new kernel module. If possible I would like to avoid that - my thinking being that someone may have already provided a tool for doing this sort of thing and provided the module to assist already.
My second question is: does anyone have a good list of examples of applications/services/whatever using this sort of technique to provide a filesystem based interface.
Lastly if anyone has any opinions on why this might be a good/bad idea to do such a thing on a generic level I would like to hear it.
A userspace filesystem via fuse would probably be your best way to go.
Regarding the next part of your question (which applications use this method), there is the window manager wmii, it uses the 9p filesystem via v9fs, which is a port of 9p to Linux. There are many examples on plan9, most notably acme. I suggested fuse because it seems more actively developed and mainstream in the Linux world, but plan9 is pretty much the reference for this approach as far as I know.
I'd like to add a new system call via an LKM, but I'm not sure how to do this. That is, I know that if I want to add a completely new system call, I can look through the sys_call_table and find a sys_ni_syscall and just replace it, but I was curious if it was possible to actually add to the sys_call_table. I realize it's probably not possible, given that it's a fixed size array, but I was wondering if there were any other clever ways to add system calls without overriding an unused system call number.
Here's an example
linux system calls
edit:
The example above shows howto implement a system call, as far as implementing one from a loadable module; AFAIK, that's not possible, unless you where to overwrite an existing one because the size of the array is a #define.
Keep in mind there are user space changes required as well, at least if you want to be able to actually use the new system call.
Check The Linux Documentation Project website for "The Linux Kernel Module Programming Guide" (http://www.tldp.org/LDP/lkmpg/2.6/html/index.html). Specifically, look here for System Calls: http://www.tldp.org/LDP/lkmpg/2.6/html/x978.html. That should give you a start, at least.
This is an old question, but nevertheless I want to propose my solution. The easiest way to implement a "system-call-like" environment is to rely on a fake device.
In particular, you could create a new device driver which is not actually driving anything. Yet, writing on it, can cause the installed module to perform the required actions.
Additionally, if you want to offer several services, you might map them to ioctl operations.