I was working on a computer which had Avast software running on it. I tried to open an executable (CoolEdit) which Avast opened in sandbox mode. I recorded a lot of stuff with CoolEdit and closed it down. The sandbox operates in a mode that says : Attention: Any data remaining when the session is closed will not be saved, or something to that effect. I saved all my data and was even able to see it before I closed CoolEdit down. Now I find it is not there. My questions:
1. What is going on?
2. Is the data lost or is it hiding in some folder?
3. Is there a way to recover that data?
Once you have closed the session down (by closing the application that is being run in the sandbox), it is unlikely that the data can be recovered. However, when the application is running in the sandbox, you will see all files as being saved in the locations that you have saved them (only through the dialog boxes of the application though. In reality, the files are not being stored there at all). Avast creates a directory called ## awsnx or something on those lines. All the data that has been saved in the session will be saved in a sub-folder within that directory. Please note that this data in the sub-folder will exist only as long as the session lasts. Once the session is over, all that data will be lost.
Word of advice to anyone using Avast. Disable this feature. You will lose anything that it deems suspicious, without giving you any way to recover it.
Say for instance, your Email. It for some reason thinks today "Ahha suspicious!" and sandboxes it while it scans it.. Oh hey nothing there.. I'll close it out of sandbox and run it normally.... Minues the 20-30 Emails you received as it was screwing around with your Email application.
Gone. No recovery.
As it is, for this I am uninstalling avast. I'd rather put up with mcaffee.
Related
I recently started making music using GarageBand's MIDI software. I've made it up to a certain point, where losing all my progress would be disastrous.
Here's the issue I have:
When I go to File > Save/Save As or just cmd+S or cmd+shift+S, or Share > Export Song to Disk, instead of functioning and saving the file (I checked in Finder; last time I exited the app without saving due to this issue, the untitled garageband file disappeared) properly onto the app, it would either do nothing or give me the rainbow wheel of death for 10-20 seconds and then proceed to not function.
I've searched online for answers to this, and there were several (2) users I found that had the same problem. Their post either had no answer or the answer was unintuitive (such as always using a different, more complicated method to save, like messing around with the garageband files themselves everytime to save).
I'm looking for an answer to this issue that would result in slightly more convenient, one-time edits to the app / any software beneath that would fix this issue, if there are any. However, if the community has any alternate way to save the file right now, I would greatly appreciate it.
======
Also:
Since I'd assume most of the solutions would involve closing the app and then making edits, then reinstalling it, please tell me if I could just copy the notes (not the tracks) onto a text document and paste it into the new file after. I would prefer to save my music.
Try this . . .
First QUIT Garageband (yes you will lose unsaved work).
Find the Garageband folder where all the .BAND files are saved. Usually it is in Users -> Username -> Music -> Garageband.
Move older .band files into another folder (EG: "Garageband OLD")
Then start a new project (or open a project still in the Garageband folder).
Save and Save-As should now work.
It seems there is some sort of file limit for the Garageband folder. In my case the file limit is either 170 .band files or about 125GB.
I am currently using Garageband 10.3.5 on High Sierra.
I encountered this weird ass and funny error.
I built a file for data ETL. This one takes in various .csv files, combines them and export new .csv files using VBA. The file is originally named as "xxx Modelling ETL.xlsm". It could be opened normally till one day it hangs or crashes while trying to recalculating something (may be the underground query).
After hours of struggling, I opened the file as a copy (under a new name of Copy of ...). Strangely it ran smoothly, no crash or hang. Then I try rename it by remove the "Copy of" part, then the error occurs again.
I want to share this as there could be someone has the same problem, or someone who could shed some light on this black magic thing.
Some solutions:
Rename the file or move it to local drive instead of Onedrive makes thing works normally again.
Open Trust Center, disable Macro with notification, Trusted Locations, and Trusted Documents. Enable them for specific files when open, not for all.
I have a 20 excel files with Automation written in VBA where the workflow is similar but there is some customizations in each of the files. I would like to have 20 files, each file per task, but I would like to put all macros into one file, with all the customizations. This will simplify fixing/changing the automation.
I want to have basically one file GlobalMacros.xls somewhere in a shared drive which contains all the modules that do not contain customizations, and only have references to it in the proper files.
Personal.xls is not an answer as I do not want users/team members to feel the changes at all.
Please tell me if there is a solution and what are downsides.
Solution 1:
My solution is to make the module in GlobalMacro.xls and then add just a reference to the module in each file. The downside is it could slow down the execution of the macros because the GlobalMacros.xls will be opened and closed in the background each time any module is called out. Also is it possible for several users using these macros at the same time?
Has anyone got any better solutions? Maybe someone had a similar problem in the past.
I'll go into a bit more detail about how to use XLAM files properly.
In a network environment, you will want to keep a local copy of the XLAM where you make changes and updates, and once all glitches are worked out, you then copy it to the server where everyone else accesses it. You will want to also make the server copy read-only, which must be reset each time you copy the file to the server. If you dont make it read-only, you will not be able to copy the updated file to the server while anyone has Excel currently open.
In addition, when the users add the Add-On to their Excel, they will be prompted to copy the XLAM file to their local computer, to which they should reply No, as they want to be able to run off the server copy so they can get your updates. I have found that most people instinctively think they should answer Yes to that question.
If they end up answering Yes, then the only way to fix it is to edit thier registry and remove the reference, and then re-add the Add-On.
I had a text file to save all my important credentials, links and notes. Today when i was working on it, all of a sudden notepad++ crashed. when i reopened np++ the file was empty with zero bytes. I am so stuck now as it has all my credentials.
Is there a way to recover this?
Many thanks
Well you need to recover the file from your latest backup, but I'm guessing that because your asking this question, you don't have one?
If that's the case, then your pretty limited in what you can do. If you have saving of previous versions turned on in Windows you may be able to load an older version by right clicking on the file, go to properties and look at previous versions.
However, more than likely you are going to have to accept that it is gone, learn your lesson and start doing regular backups.
I just restarted my laptop today because it was saying there was problem with one of the disks and it needed to restart to fix it, so I restarted it. But when it was booting it came across to a problem and was not able to boot and showed me some options. So under "refresh" it was saying it won't delete any files but it may delete apps, which was fine for me so I chose this and waited about 15-20mins to do the job.
Once it was done windows started normally and I got my old desktop with old names of my files. Everything was fine except I was not able to find the folder I have been working on for the last two months (which I did not backup stupidly, though I intended a few times but was lazy and I had no worry about losing the data). The folder was just at the middle of my desktop with the name "equation derivation". I can not freaking find it. All of my other folders are here but not THE ONE that is supposed to be. I am just freaking out here.... I had many matlab codes and PDF files inside this folder.
I tried to restore but there is no restore point because of freaking "refresh".
I tried to use a recovery program to show me some files, but it found almost nothing.
There is a "windows.old" file which has user accounts but in that one there are fiveusers: Administrator, guest, ibaha_000, Public, UpdatusUser. Last three folder's creation date is today and first two folders creation date is when I bought the laptop (2014-HP-Envy) . When I go inside ibaha_000 folder (or any others) there are some folders inside it and I try to go inside "Desktop" because the folder I am trying to find was on desktop, but there is nothing there at all. So "windows.old" did not restore any of my files....
When I search for any of the matlab file names or folder names or PDF file names on the search of PC, I get no result.
Please someone help me with this I really need someone's help to recover my files that I spent two months... (And I know I should have backed it up but there was no sign of anything like this I would have, stupid me...)
Thank you very much!
I was able to recover my files from the hard-disk with professional "active at" recovery program that ran about 8 hours to pull out data.
Refresh might delete your files because it might recognize some of your programs or text files as windows program files, as it happened in my case. It didn't delete all of my matlab files, it deleted the folder I have lots of .m files.
So before refreshing windows, BACKUP your data, that's the solution.