Assume you have a webserver with a web-application running and a bluetooth module installed on the webserver.
Would it be possible to open a bluetooth connection from the webserver bluetooth module to another bluetooth device when a user triggers an action in the web-application?
yes, this is possible - since you don't state whether your runtime environment is Java or .NET:
For .NET/C# see
http://www.programmersheaven.com/2/Transferring-Files-and-Monitoring-Bluetooth-Ports
http://32feet.codeplex.com/
For Java see
http://developers.sun.com/mobility/midp/articles/bluetooth2/
http://sourceforge.net/projects/bluecove/
Related
I have a WPF desktop application that would make a good candidate as a Universal Windows App. The application has a must-have dependence on USB or Bluetooth devices that act as a Serial Port.
In all my reading I've yet to discover whether there is any access to a SerialPort API in a UWA.
I suspect the answer is 'No support'. If so, does anyone know of a USB or Bluetooth GPS that supports whatever APIs the UWA has for that sort of thing. I have to be able to read things like ground speed, elevation, rate of climb, etc.
If the answer is 'Supported', could you point me to some documentation.
For the "Bluetooth devices that act as a Serial Port", I assume you mean the RFCOMM. They are both supported on Windows Runtime since Windows 8.1 and you can also use them in the Universal Windows Application.
namespace: Windows.Devices.Usb and Windows.Devices.Bluetooth.Rfcomm.
About the Bluetooth GPS, I'm not sure if it uses RFCOMM or not (it depends on the devices), and it is also possible to use the GATT.
Code Sample: Custom USB device access sample
I am using a Single-Mode Bluetooth Low Energy PAN1720BR BLE dongle which is loaded with the firmware "BlueRadios nBlue 1.2.1.3.1.0-PAN1720" (latest). When plugged to a computer, I can control and configure this PAN1720BR module with AT Commands through a terminal application on the computer.
With a second computer equipped with a standard BLE dongle, I can pair and connect to the PAN1720BR. See configuration below:
PC1 + PAN1720BR <---- BT 4.0 ----> PC2 + Standard BLE dongle + App running on PC2
The problem is that BLE does not have an SPP profile, so to establish a communication between the two PCs, I need to write an application on PC2. The PAN1720BR has a proprietary profile called BlueRadios Serial Port (BRPS) which is not a standard.
BlueRadios provides libraries for iOS and Android so that we can connect a cellphone to a PAN1720BR and communicate wih it. But they are silent about how to connect a PC (Windows) to a PAN1720BR. When establishing the connection, the Battery service (standard) installs properly on PC2, but the service corresponding to BRSP does not install, driver is missing. What is going on here is not very clear to me.
My goal is to write an application to be run on PC2 to enable communication between the two PCs. My question is, how can I access the Bluetooth with my application? Please correct me if I'm wrong, but I believe my app needs to access the ATT/GATT layer in order to read/write data.
Do you have any sample code that would help, in Java (prefered), C/C++, C# or anything else that would help on Windows?
Thank you
For an App with BLE Module from BlueRadios you must use the ATT/GATT Profile or you use the library from BlueRadios with there BRSP Profile.
I'm trying to use a Bluetooth OBDII (on-board diagnosis) to connect with a Bluetooth dongle connected to my computer (My OS is windows 7). The dongle connects to the device and assigns it 2 virtual com ports (COM4 for incoming and COM5 for outgoing), But unfortunately I couldn't communicate with this device over the virtual com port. I also attempted to work with winsock library but I didn't find any example for working with Bluetooth OBD and send and receive the instruments. I just found one Bluetooth API for android but it's not useful for me because I want to implement it inside the visual C++ and for PC. and right now I have 2 questions about that :
1. which method is better, Virtual com port or winsock and how ?
2. Do you have any sample code for working with Bluetooth OBD ?
1: Has your device a ELM327 chip? If so, you can setup a serial port over bluetooth, and communicate with that port. I don't know winsock very much, but I think a serial port is better suited for this job.
To set it up, have a look here: http://windows.microsoft.com/en-us/windows7/choose-a-com-port-for-a-bluetooth-enabled-device
Maybe if you can pair with the device, windows 7 will automagically set it up?
2:
You might want to have a look at: http://icculus.org/obdgpslogger/
It's open-source, so you can have a peek how it works. There's also a simulator in the package, which could help you developing/testing. Mostly is Linux based, but it should give you hints where to go. There are also windows installers available for the simulator.
I am going to have a project that can get data from devices that support Health Device Profile(HDP) in Windows.
I find Bluez but it is only available in Linux. Is there any alternative in Windows? Thank You
There are multiple suppliers of Bluetooth stack for desktop Windows. The only one that I know supports HDP directly is Toshiba (though I've no experience with it). So, instead once can add the HDP support outside of the stack software. However, HDP[1] uses the L2CAP protocol which is lower level that RFCOMM protocol that most apps use, and unfortunately Microsoft's Bluetooth stack does not provide a user-level L2CAP API. I started work on a driver to allow user-mode access to the kernel-level API (provided by MSFT in Vista and later) but never finished it. For the other main stacks BlueSoleil doesn't provide a L2CAP API, but Widcomm does.
[1] http://www.alanjmcf.me.uk/comms/bluetooth/Bluetooth%20Profiles%20and%2032feet.NET.html#_Toc266869895
I'm trying to access serial port through web browser.
The reason is for downloading firmware to a device that is connected to the same machine that is running the browser (via USB to rs-232).
I'v searched around and have seen that this is doable via Silverlight, but this is Windows only centric since it requires COM support, while my main operating system is Linux, then Windows and then Mac.
I know it's easy to develop JavaFX / QT / Mono / AIR cross platform applications, but those require installing a huge runtime binaries and only then run the application.
I'm trying to keep it really simple, plug your device, visit a web site and it will auto install your application.
Do you guys think it's possible?
Thanks.
https://code.google.com/p/java-simple-serial-connector/
Since Java is cross platform, this would be the only thing required to get the serial support you need in browser.
(not exactly a security nightmare as #"awm" proposed) You could implement a websocket on the localhost, expose a port that is rarely used and call that websocket to open the serial port and feed data to the device to upgrade the firmware.