I would like to spawn a process suspended, possibly in the context of another user (e.g. via sudo -u ...), set up some iptables rules for the spawned process, continue running the process, and remove the iptable rules when the process exists.
Is there any standart means (bash, corutils, etc.) that allows me to achieve the above? In particular, how can I spawn a process in a suspended state and get its pid?
Write a wrapper script start-stopped.sh like this:
#!/bin/sh
kill -STOP $$ # suspend myself
# ... until I receive SIGCONT
exec $# # exec argument list
And then call it like:
sudo -u $SOME_USER start-stopped.sh mycommand & # start mycommand in stopped state
MYCOMMAND_PID=$!
setup_iptables $MYCOMMAND_PID # use its PID to setup iptables
sudo -u $SOME_USER kill -CONT $MYCOMMAND_PID # make mycommand continue
wait $MYCOMMAND_PID # wait for its termination
MYCOMMAND_EXIT_STATUS=$?
teardown_iptables # remove iptables rules
report $MYCOMMAND_EXIT_STATUS # report errors, if necessary
All this is overkill, however. You don't need to spawn your process in a suspended state to get the job done. Just make a wrapper script setup_iptables_and_start:
#!/bin/sh
setup_iptables $$ # use my own PID to setup iptables
exec sudo -u $SOME_USER $# # exec'ed command will have same PID
And then call it like
setup_iptables_and_start mycommand || report errors
teardown_iptables
You can write a C wrapper for your program that will do something like this :
fork and print child pid.
In the child, wait for user to press Enter. This puts the child in sleep and you can add the rules with the pid.
Once rules are added, user presses enter. The child runs your original program, either using exec or system.
Will this work?
Edit:
Actually you can do above procedure with a shell script. Try following bash script:
#!/bin/bash
echo "Pid is $$"
echo -n "Press Enter.."
read
exec $#
You can run this as /bin/bash ./run.sh <your command>
One way to do it is to enlist gdb to pause the program at the start of its main function (using the command "break main"). This will guarantee that the process is suspended fast enough (although some initialisation routines can run before main, they probably won't do anything relevant). However, for this you will need debugging information for the program you want to start suspended.
I suggest you try this manually first, see how it works, and then work out how to script what you've done.
Alternatively, it may be possible to constrain the process (if indeed that is what you're trying to do!) without using iptables, using SELinux or a ptrace-based tool like sydbox instead.
I suppose you could write a util yourself that forks, and wherein the child of the fork suspends itself just before doing an exec. Otherwise, consider using an LD_PRELOAD lib to do your 'custom' business.
If you care about making that secure, you should probably look at bigger guns (with chroot, perhaps paravirtualization, user mode linux etc. etc);
Last tip: if you don't mind doing some more coding, the ptrace interface should allow you to do what you describe (since it is used to implement debuggers with)
You probably need the PID of a program you're starting, before that program actually starts running. You could do it like this.
Start a plain script
Force the script to wait
You can probably use suspend which is a bash builitin but in the worst case you can make it stop itself with a signal
Use the PID of the bash process in every way you want
Restart the stopped bash process (SIGCONT) and do an exec - another builtin - starting your real process (it will inherit the PID)
Related
Let's say I have a silly script:
while true;do
touch ~/test_file
sleep 3
done
And I start the script into the background and leave the terminal:
chmod u+x silly_script.sh
./silly_script.sh &
exit
Is there a way for me to identify and stop that script now? The way I see it is, that every command is started in it's own process and I might be able to catch and kill one command like the 'sleep 3' but not the execution of the entire script, am I mistaken? I expected a process to appear with the scripts name, but it does not. If I start the script with 'source silly_script.sh' I can't find a process by the name of 'source'. Do I need to identify the instance of bash, that is executing the script? How would I do that?
EDIT: There have been a few creative solutions, but so far they require the PID of the script execution to be stored right away, or the bash session to not be left with ^D or exit. I understand, that this way of running scripts should maybe be avoided, but I find it hard to believe, that any low privilege user could, even by accident, start an annoying script into the background, that is for instance filling the drive with garbage files or repeatedly starting new instances of some software and even the admin has no other option, than to restart the server, because a simple script can hide it's identifier without even trying.
With the help of the fine people here I was able to derive the answer I needed:
It is true, that the script runs every command in it's own process, so for instance killing the sleep 3 command won't do anything to the script being run, but through a command like the sleep 3 you can find the bash instance running the script, by looking for the parent process:
So after doing the above, you can run ps axf to show all processes in a tree form. You will then find this section:
18660 ? S 0:00 /bin/bash
18696 ? S 0:00 \_ sleep 3
Now you have found the bash instance, that is running the script and can stop it: kill 18660
(Of course your PID will be different from mine)
The jobs command will show you all running background jobs.
You can kill background jobs by id using kill, e.g.:
$ sleep 9999 &
[1] 58730
$ jobs
[1]+ Running sleep 9999 &
$ kill %1
[1]+ Terminated sleep 9999
$ jobs
$
58730 is the PID of the backgrounded task, and 1 is the task id of it. In this case kill 58730 and kill %1` would have the same effect.
See the JOB CONTROL section of man bash for more info.
When you exit, the backgrounded job will get a kill signal and die (assuming that's how it handles the signal - in your simple example it is), unless you disown it first.
That kill will propogate to the sleep process, which may well ignore it and continue sleeping. If this is the case you'll still see it in ps -e output, but with a parent pid of 1 indicating its original parent no longer exists.
You can use ps -o ppid= <pid> to find the parent of a process, or pstree -ap to visualise the job hierarchy and find the parent visually.
I have a python script that'll be checking a queue and performing an action on each item:
# checkqueue.py
while True:
check_queue()
do_something()
How do I write a bash script that will check if it's running, and if not, start it. Roughly the following pseudo code (or maybe it should do something like ps | grep?):
# keepalivescript.sh
if processidfile exists:
if processid is running:
exit, all ok
run checkqueue.py
write processid to processidfile
I'll call that from a crontab:
# crontab
*/5 * * * * /path/to/keepalivescript.sh
Avoid PID-files, crons, or anything else that tries to evaluate processes that aren't their children.
There is a very good reason why in UNIX, you can ONLY wait on your children. Any method (ps parsing, pgrep, storing a PID, ...) that tries to work around that is flawed and has gaping holes in it. Just say no.
Instead you need the process that monitors your process to be the process' parent. What does this mean? It means only the process that starts your process can reliably wait for it to end. In bash, this is absolutely trivial.
until myserver; do
echo "Server 'myserver' crashed with exit code $?. Respawning.." >&2
sleep 1
done
The above piece of bash code runs myserver in an until loop. The first line starts myserver and waits for it to end. When it ends, until checks its exit status. If the exit status is 0, it means it ended gracefully (which means you asked it to shut down somehow, and it did so successfully). In that case we don't want to restart it (we just asked it to shut down!). If the exit status is not 0, until will run the loop body, which emits an error message on STDERR and restarts the loop (back to line 1) after 1 second.
Why do we wait a second? Because if something's wrong with the startup sequence of myserver and it crashes immediately, you'll have a very intensive loop of constant restarting and crashing on your hands. The sleep 1 takes away the strain from that.
Now all you need to do is start this bash script (asynchronously, probably), and it will monitor myserver and restart it as necessary. If you want to start the monitor on boot (making the server "survive" reboots), you can schedule it in your user's cron(1) with an #reboot rule. Open your cron rules with crontab:
crontab -e
Then add a rule to start your monitor script:
#reboot /usr/local/bin/myservermonitor
Alternatively; look at inittab(5) and /etc/inittab. You can add a line in there to have myserver start at a certain init level and be respawned automatically.
Edit.
Let me add some information on why not to use PID files. While they are very popular; they are also very flawed and there's no reason why you wouldn't just do it the correct way.
Consider this:
PID recycling (killing the wrong process):
/etc/init.d/foo start: start foo, write foo's PID to /var/run/foo.pid
A while later: foo dies somehow.
A while later: any random process that starts (call it bar) takes a random PID, imagine it taking foo's old PID.
You notice foo's gone: /etc/init.d/foo/restart reads /var/run/foo.pid, checks to see if it's still alive, finds bar, thinks it's foo, kills it, starts a new foo.
PID files go stale. You need over-complicated (or should I say, non-trivial) logic to check whether the PID file is stale, and any such logic is again vulnerable to 1..
What if you don't even have write access or are in a read-only environment?
It's pointless overcomplication; see how simple my example above is. No need to complicate that, at all.
See also: Are PID-files still flawed when doing it 'right'?
By the way; even worse than PID files is parsing ps! Don't ever do this.
ps is very unportable. While you find it on almost every UNIX system; its arguments vary greatly if you want non-standard output. And standard output is ONLY for human consumption, not for scripted parsing!
Parsing ps leads to a LOT of false positives. Take the ps aux | grep PID example, and now imagine someone starting a process with a number somewhere as argument that happens to be the same as the PID you stared your daemon with! Imagine two people starting an X session and you grepping for X to kill yours. It's just all kinds of bad.
If you don't want to manage the process yourself; there are some perfectly good systems out there that will act as monitor for your processes. Look into runit, for example.
Have a look at monit (http://mmonit.com/monit/). It handles start, stop and restart of your script and can do health checks plus restarts if necessary.
Or do a simple script:
while true
do
/your/script
sleep 1
done
In-line:
while true; do <your-bash-snippet> && break; done
This will restart continuously <your-bash-snippet> if it fails: && break will stop the loop if <your-bash-snippet> stop gracefully (return code 0).
To restart <your-bash-snippet> in all cases:
while true; do <your-bash-snippet>; done
e.g. #1
while true; do openconnect x.x.x.x:xxxx && break; done
e.g. #2
while true; do docker logs -f container-name; sleep 2; done
The easiest way to do it is using flock on file. In Python script you'd do
lf = open('/tmp/script.lock','w')
if(fcntl.flock(lf, fcntl.LOCK_EX|fcntl.LOCK_NB) != 0):
sys.exit('other instance already running')
lf.write('%d\n'%os.getpid())
lf.flush()
In shell you can actually test if it's running:
if [ `flock -xn /tmp/script.lock -c 'echo 1'` ]; then
echo 'it's not running'
restart.
else
echo -n 'it's already running with PID '
cat /tmp/script.lock
fi
But of course you don't have to test, because if it's already running and you restart it, it'll exit with 'other instance already running'
When process dies, all it's file descriptors are closed and all locks are automatically removed.
You should use monit, a standard unix tool that can monitor different things on the system and react accordingly.
From the docs: http://mmonit.com/monit/documentation/monit.html#pid_testing
check process checkqueue.py with pidfile /var/run/checkqueue.pid
if changed pid then exec "checkqueue_restart.sh"
You can also configure monit to email you when it does do a restart.
if ! test -f $PIDFILE || ! psgrep `cat $PIDFILE`; then
restart_process
# Write PIDFILE
echo $! >$PIDFILE
fi
watch "yourcommand"
It will restart the process if/when it stops (after a 2s delay).
watch -n 0.1 "yourcommand"
To restart it after 0.1s instead of the default 2 seconds
watch -e "yourcommand"
To stop restarts if the program exits with an error.
Advantages:
built-in command
one line
easy to use and remember.
Drawbacks:
Only display the result of the command on the screen once it's finished
I'm not sure how portable it is across operating systems, but you might check if your system contains the 'run-one' command, i.e. "man run-one".
Specifically, this set of commands includes 'run-one-constantly', which seems to be exactly what is needed.
From man page:
run-one-constantly COMMAND [ARGS]
Note: obviously this could be called from within your script, but also it removes the need for having a script at all.
I've used the following script with great success on numerous servers:
pid=`jps -v | grep $INSTALLATION | awk '{print $1}'`
echo $INSTALLATION found at PID $pid
while [ -e /proc/$pid ]; do sleep 0.1; done
notes:
It's looking for a java process, so I
can use jps, this is much more
consistent across distributions than
ps
$INSTALLATION contains enough of the process path that's it's totally unambiguous
Use sleep while waiting for the process to die, avoid hogging resources :)
This script is actually used to shut down a running instance of tomcat, which I want to shut down (and wait for) at the command line, so launching it as a child process simply isn't an option for me.
I use this for my npm Process
#!/bin/bash
for (( ; ; ))
do
date +"%T"
echo Start Process
cd /toFolder
sudo process
date +"%T"
echo Crash
sleep 1
done
I have a python script that'll be checking a queue and performing an action on each item:
# checkqueue.py
while True:
check_queue()
do_something()
How do I write a bash script that will check if it's running, and if not, start it. Roughly the following pseudo code (or maybe it should do something like ps | grep?):
# keepalivescript.sh
if processidfile exists:
if processid is running:
exit, all ok
run checkqueue.py
write processid to processidfile
I'll call that from a crontab:
# crontab
*/5 * * * * /path/to/keepalivescript.sh
Avoid PID-files, crons, or anything else that tries to evaluate processes that aren't their children.
There is a very good reason why in UNIX, you can ONLY wait on your children. Any method (ps parsing, pgrep, storing a PID, ...) that tries to work around that is flawed and has gaping holes in it. Just say no.
Instead you need the process that monitors your process to be the process' parent. What does this mean? It means only the process that starts your process can reliably wait for it to end. In bash, this is absolutely trivial.
until myserver; do
echo "Server 'myserver' crashed with exit code $?. Respawning.." >&2
sleep 1
done
The above piece of bash code runs myserver in an until loop. The first line starts myserver and waits for it to end. When it ends, until checks its exit status. If the exit status is 0, it means it ended gracefully (which means you asked it to shut down somehow, and it did so successfully). In that case we don't want to restart it (we just asked it to shut down!). If the exit status is not 0, until will run the loop body, which emits an error message on STDERR and restarts the loop (back to line 1) after 1 second.
Why do we wait a second? Because if something's wrong with the startup sequence of myserver and it crashes immediately, you'll have a very intensive loop of constant restarting and crashing on your hands. The sleep 1 takes away the strain from that.
Now all you need to do is start this bash script (asynchronously, probably), and it will monitor myserver and restart it as necessary. If you want to start the monitor on boot (making the server "survive" reboots), you can schedule it in your user's cron(1) with an #reboot rule. Open your cron rules with crontab:
crontab -e
Then add a rule to start your monitor script:
#reboot /usr/local/bin/myservermonitor
Alternatively; look at inittab(5) and /etc/inittab. You can add a line in there to have myserver start at a certain init level and be respawned automatically.
Edit.
Let me add some information on why not to use PID files. While they are very popular; they are also very flawed and there's no reason why you wouldn't just do it the correct way.
Consider this:
PID recycling (killing the wrong process):
/etc/init.d/foo start: start foo, write foo's PID to /var/run/foo.pid
A while later: foo dies somehow.
A while later: any random process that starts (call it bar) takes a random PID, imagine it taking foo's old PID.
You notice foo's gone: /etc/init.d/foo/restart reads /var/run/foo.pid, checks to see if it's still alive, finds bar, thinks it's foo, kills it, starts a new foo.
PID files go stale. You need over-complicated (or should I say, non-trivial) logic to check whether the PID file is stale, and any such logic is again vulnerable to 1..
What if you don't even have write access or are in a read-only environment?
It's pointless overcomplication; see how simple my example above is. No need to complicate that, at all.
See also: Are PID-files still flawed when doing it 'right'?
By the way; even worse than PID files is parsing ps! Don't ever do this.
ps is very unportable. While you find it on almost every UNIX system; its arguments vary greatly if you want non-standard output. And standard output is ONLY for human consumption, not for scripted parsing!
Parsing ps leads to a LOT of false positives. Take the ps aux | grep PID example, and now imagine someone starting a process with a number somewhere as argument that happens to be the same as the PID you stared your daemon with! Imagine two people starting an X session and you grepping for X to kill yours. It's just all kinds of bad.
If you don't want to manage the process yourself; there are some perfectly good systems out there that will act as monitor for your processes. Look into runit, for example.
Have a look at monit (http://mmonit.com/monit/). It handles start, stop and restart of your script and can do health checks plus restarts if necessary.
Or do a simple script:
while true
do
/your/script
sleep 1
done
In-line:
while true; do <your-bash-snippet> && break; done
This will restart continuously <your-bash-snippet> if it fails: && break will stop the loop if <your-bash-snippet> stop gracefully (return code 0).
To restart <your-bash-snippet> in all cases:
while true; do <your-bash-snippet>; done
e.g. #1
while true; do openconnect x.x.x.x:xxxx && break; done
e.g. #2
while true; do docker logs -f container-name; sleep 2; done
The easiest way to do it is using flock on file. In Python script you'd do
lf = open('/tmp/script.lock','w')
if(fcntl.flock(lf, fcntl.LOCK_EX|fcntl.LOCK_NB) != 0):
sys.exit('other instance already running')
lf.write('%d\n'%os.getpid())
lf.flush()
In shell you can actually test if it's running:
if [ `flock -xn /tmp/script.lock -c 'echo 1'` ]; then
echo 'it's not running'
restart.
else
echo -n 'it's already running with PID '
cat /tmp/script.lock
fi
But of course you don't have to test, because if it's already running and you restart it, it'll exit with 'other instance already running'
When process dies, all it's file descriptors are closed and all locks are automatically removed.
You should use monit, a standard unix tool that can monitor different things on the system and react accordingly.
From the docs: http://mmonit.com/monit/documentation/monit.html#pid_testing
check process checkqueue.py with pidfile /var/run/checkqueue.pid
if changed pid then exec "checkqueue_restart.sh"
You can also configure monit to email you when it does do a restart.
if ! test -f $PIDFILE || ! psgrep `cat $PIDFILE`; then
restart_process
# Write PIDFILE
echo $! >$PIDFILE
fi
watch "yourcommand"
It will restart the process if/when it stops (after a 2s delay).
watch -n 0.1 "yourcommand"
To restart it after 0.1s instead of the default 2 seconds
watch -e "yourcommand"
To stop restarts if the program exits with an error.
Advantages:
built-in command
one line
easy to use and remember.
Drawbacks:
Only display the result of the command on the screen once it's finished
I'm not sure how portable it is across operating systems, but you might check if your system contains the 'run-one' command, i.e. "man run-one".
Specifically, this set of commands includes 'run-one-constantly', which seems to be exactly what is needed.
From man page:
run-one-constantly COMMAND [ARGS]
Note: obviously this could be called from within your script, but also it removes the need for having a script at all.
I've used the following script with great success on numerous servers:
pid=`jps -v | grep $INSTALLATION | awk '{print $1}'`
echo $INSTALLATION found at PID $pid
while [ -e /proc/$pid ]; do sleep 0.1; done
notes:
It's looking for a java process, so I
can use jps, this is much more
consistent across distributions than
ps
$INSTALLATION contains enough of the process path that's it's totally unambiguous
Use sleep while waiting for the process to die, avoid hogging resources :)
This script is actually used to shut down a running instance of tomcat, which I want to shut down (and wait for) at the command line, so launching it as a child process simply isn't an option for me.
I use this for my npm Process
#!/bin/bash
for (( ; ; ))
do
date +"%T"
echo Start Process
cd /toFolder
sudo process
date +"%T"
echo Crash
sleep 1
done
I have a bash script running on Ubuntu.
Is it possible to see the line/command executed now without script restart.
The issue is that script sometimes never exits. This is really hard to reproduce (now I caught it), so I can't just stop the script and start the debugging.
Any help would be really appreciated
P.S. Script logic is hard to understand, so I can't to figure out why it's frozen by power of thoughts.
Try to find the process id (pid) of the shell, you may use ps -ef | grep <script_name>
Let's set this pid in the shell variable $PID.
Find all the child processes of this $PID by:
ps --ppid $PID
You might find one or more (if for example it's stuck in a pipelined series of commands). Repeat this command couple of times. If it doesn't change this means the script is stuck in certain command. In this case, you may attach trace command to the running child process:
sudo strace -p $PID
This will show you what is being executed, either indefinite loop (like reading from a pipe) or waiting on some event that never happens.
In case you find ps --ppid $PID changes, this indicates that your script is advancing but it's stuck somewhere, e.g. local loop in the script. From the changing commands, it can give you a hint where in the script it's looping.
I have a python script that'll be checking a queue and performing an action on each item:
# checkqueue.py
while True:
check_queue()
do_something()
How do I write a bash script that will check if it's running, and if not, start it. Roughly the following pseudo code (or maybe it should do something like ps | grep?):
# keepalivescript.sh
if processidfile exists:
if processid is running:
exit, all ok
run checkqueue.py
write processid to processidfile
I'll call that from a crontab:
# crontab
*/5 * * * * /path/to/keepalivescript.sh
Avoid PID-files, crons, or anything else that tries to evaluate processes that aren't their children.
There is a very good reason why in UNIX, you can ONLY wait on your children. Any method (ps parsing, pgrep, storing a PID, ...) that tries to work around that is flawed and has gaping holes in it. Just say no.
Instead you need the process that monitors your process to be the process' parent. What does this mean? It means only the process that starts your process can reliably wait for it to end. In bash, this is absolutely trivial.
until myserver; do
echo "Server 'myserver' crashed with exit code $?. Respawning.." >&2
sleep 1
done
The above piece of bash code runs myserver in an until loop. The first line starts myserver and waits for it to end. When it ends, until checks its exit status. If the exit status is 0, it means it ended gracefully (which means you asked it to shut down somehow, and it did so successfully). In that case we don't want to restart it (we just asked it to shut down!). If the exit status is not 0, until will run the loop body, which emits an error message on STDERR and restarts the loop (back to line 1) after 1 second.
Why do we wait a second? Because if something's wrong with the startup sequence of myserver and it crashes immediately, you'll have a very intensive loop of constant restarting and crashing on your hands. The sleep 1 takes away the strain from that.
Now all you need to do is start this bash script (asynchronously, probably), and it will monitor myserver and restart it as necessary. If you want to start the monitor on boot (making the server "survive" reboots), you can schedule it in your user's cron(1) with an #reboot rule. Open your cron rules with crontab:
crontab -e
Then add a rule to start your monitor script:
#reboot /usr/local/bin/myservermonitor
Alternatively; look at inittab(5) and /etc/inittab. You can add a line in there to have myserver start at a certain init level and be respawned automatically.
Edit.
Let me add some information on why not to use PID files. While they are very popular; they are also very flawed and there's no reason why you wouldn't just do it the correct way.
Consider this:
PID recycling (killing the wrong process):
/etc/init.d/foo start: start foo, write foo's PID to /var/run/foo.pid
A while later: foo dies somehow.
A while later: any random process that starts (call it bar) takes a random PID, imagine it taking foo's old PID.
You notice foo's gone: /etc/init.d/foo/restart reads /var/run/foo.pid, checks to see if it's still alive, finds bar, thinks it's foo, kills it, starts a new foo.
PID files go stale. You need over-complicated (or should I say, non-trivial) logic to check whether the PID file is stale, and any such logic is again vulnerable to 1..
What if you don't even have write access or are in a read-only environment?
It's pointless overcomplication; see how simple my example above is. No need to complicate that, at all.
See also: Are PID-files still flawed when doing it 'right'?
By the way; even worse than PID files is parsing ps! Don't ever do this.
ps is very unportable. While you find it on almost every UNIX system; its arguments vary greatly if you want non-standard output. And standard output is ONLY for human consumption, not for scripted parsing!
Parsing ps leads to a LOT of false positives. Take the ps aux | grep PID example, and now imagine someone starting a process with a number somewhere as argument that happens to be the same as the PID you stared your daemon with! Imagine two people starting an X session and you grepping for X to kill yours. It's just all kinds of bad.
If you don't want to manage the process yourself; there are some perfectly good systems out there that will act as monitor for your processes. Look into runit, for example.
Have a look at monit (http://mmonit.com/monit/). It handles start, stop and restart of your script and can do health checks plus restarts if necessary.
Or do a simple script:
while true
do
/your/script
sleep 1
done
In-line:
while true; do <your-bash-snippet> && break; done
This will restart continuously <your-bash-snippet> if it fails: && break will stop the loop if <your-bash-snippet> stop gracefully (return code 0).
To restart <your-bash-snippet> in all cases:
while true; do <your-bash-snippet>; done
e.g. #1
while true; do openconnect x.x.x.x:xxxx && break; done
e.g. #2
while true; do docker logs -f container-name; sleep 2; done
The easiest way to do it is using flock on file. In Python script you'd do
lf = open('/tmp/script.lock','w')
if(fcntl.flock(lf, fcntl.LOCK_EX|fcntl.LOCK_NB) != 0):
sys.exit('other instance already running')
lf.write('%d\n'%os.getpid())
lf.flush()
In shell you can actually test if it's running:
if [ `flock -xn /tmp/script.lock -c 'echo 1'` ]; then
echo 'it's not running'
restart.
else
echo -n 'it's already running with PID '
cat /tmp/script.lock
fi
But of course you don't have to test, because if it's already running and you restart it, it'll exit with 'other instance already running'
When process dies, all it's file descriptors are closed and all locks are automatically removed.
You should use monit, a standard unix tool that can monitor different things on the system and react accordingly.
From the docs: http://mmonit.com/monit/documentation/monit.html#pid_testing
check process checkqueue.py with pidfile /var/run/checkqueue.pid
if changed pid then exec "checkqueue_restart.sh"
You can also configure monit to email you when it does do a restart.
if ! test -f $PIDFILE || ! psgrep `cat $PIDFILE`; then
restart_process
# Write PIDFILE
echo $! >$PIDFILE
fi
watch "yourcommand"
It will restart the process if/when it stops (after a 2s delay).
watch -n 0.1 "yourcommand"
To restart it after 0.1s instead of the default 2 seconds
watch -e "yourcommand"
To stop restarts if the program exits with an error.
Advantages:
built-in command
one line
easy to use and remember.
Drawbacks:
Only display the result of the command on the screen once it's finished
I'm not sure how portable it is across operating systems, but you might check if your system contains the 'run-one' command, i.e. "man run-one".
Specifically, this set of commands includes 'run-one-constantly', which seems to be exactly what is needed.
From man page:
run-one-constantly COMMAND [ARGS]
Note: obviously this could be called from within your script, but also it removes the need for having a script at all.
I've used the following script with great success on numerous servers:
pid=`jps -v | grep $INSTALLATION | awk '{print $1}'`
echo $INSTALLATION found at PID $pid
while [ -e /proc/$pid ]; do sleep 0.1; done
notes:
It's looking for a java process, so I
can use jps, this is much more
consistent across distributions than
ps
$INSTALLATION contains enough of the process path that's it's totally unambiguous
Use sleep while waiting for the process to die, avoid hogging resources :)
This script is actually used to shut down a running instance of tomcat, which I want to shut down (and wait for) at the command line, so launching it as a child process simply isn't an option for me.
I use this for my npm Process
#!/bin/bash
for (( ; ; ))
do
date +"%T"
echo Start Process
cd /toFolder
sudo process
date +"%T"
echo Crash
sleep 1
done