I try to uninstall Java ME SDK from Windows 7 x64, but it doesn't work for me.
If I choose Uninstall I get a progress bar, then it goes away, but the Software is still there.
On the first few times I did this, I got the same error message as in I need help UNINSTALLING Java ME SDK:
... show message dialog
title: Critical Error
message: Cannot load native library from path: native/jmesdk/windows/windows-x86.dll
Exception:
java.lang.UnsatisfiedLinkError:
C:\Users\Jonas\AppData\Local\Temp\nbi-8367277139934329064.tmp: Can't load IA 32-bit .dll on a AMD 64-bit platform
In ref to getting the uninstaller to use the 32-bit JRE, the config I attempted that failed to work:
a) Set the PATH environmental variable to point to the 32-bit JRE
b) Windows registry edits in HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Runtime Environment\1.6 to point to the 32-bit JRE.
In a last ditch effort I renamed \Program Files\Java to Java2, and the uninstaller must have searched to find \Program Files (x86)\Java, the 32-bit JRE, and the uninstall worked.
Seriously, Sun/Oracle. Test your products.
I had the exact same problem and I figured it out. :)
It's because you have the 64-bit JRE installed. Either uninstall it or somehow redirect the J2ME uninstaller to use the 32-bit JRE on your system, so that the 32-bit uninstaller can run instead of the 64-bit uninstaller.
I had the same problem and figured the solution out. As mentioned above you need to make sure J2ME unnistaller only recognizes Java x86. The simplest way I found, instead of unnistalling Java x64, you only have to temporarily rename your Java x64 installation folder to anything you want. That is, rename the folder C:\Program Files\Java to, e.g, C:\Program Files\JavaTEMP.
Now run unnistaller. When finished rename the folder back it's previous name.
That's all.
Hope I helped.
Just perform the following steps and you will be done:
1) Click on the link below and click on any of the ...i586.exe link according to your system
http://www.oracle.com/technetwork/java/javase/downloads/jre8-downloads-2133155.html
2)Install the software without changing default settings.
3)Run cmd command and type the following:
C:\Java_ME_platform_SDK_3.0\uninstall.exe --javahome "C:\Program Files (x86)\Java\jre8"
4)[optional] uninstall java 8 from control panel which you downloaded to uninstall the above software.
Congratulations.. You just did it!!
Thank you for reading.. Any suggestions or aprreciation is welcomed..
Turns out I had exactly the same problem, uninstall java (TM) 7 64bit and locate the 32-bit java installer bone this download uninstall it and try to install the Sun Java Wireless Toolkit and uninstalled correctly.
Just run this command:
C:\Java_ME_platform_SDK_3.0\uninstall.exe --javahome "32-bit jre location"
Rather than temporarily moving the x64 JRE out of the way, just tell the J2ME SDK uninstaller to use the 32bit JRE:
C:\Java_ME_platform_SDK_3.0\uninstall.exe --javahome "C:\Program Files (x86)\Java\jre7"
Note that this provides the path to a JRE within the "Program Files (x86)" directory, which is the 32bit variant. I only had a Java 7 JRE, but this ought to work with a Java 6 JRE, also.
Related
I want to know whether it is possible to create setup.exe (64-bit) from install shield.
I have read following things to do this, but nothing worked :
https://community.flexera.com/t5/InstallShield-Forum/64-bit-Setup-Isntallation/m-p/55761#M33183
http://www.installationdeveloper.com/2169/how-to-create-a-pure-64-bit-installation-in-installshield/
Actually I'm not able to load the 64-bit dll into 32-bit installer(using UseDLL() ), following is the reason for that, so I want to build 64-bit setup.exe, which might load my 64-bit dll.
https://community.flexera.com/t5/InstallShield-Knowledge/Can-I-Load-64-bit-DLL-Files-in-InstallScript/ta-p/3819
Thanks in advance.
UseDLL is part of InstallScript. InstallShield Installscript engine supports only 32 bit dlls as of now. So, UseDLL does not load x64 DLLs.
Install Script Project is still 32-bit(in Install Shield 2020), They are supporting MSI project as 64-bit (from Install Shield 2020). So we can not build installer as 64-bit from Installer script Project.
I want to run a c++ application written in vs2017 in Ubuntu 16.04. I've installed Wine version 3.0.3 as well as Winetricks version 20140817. When trying to run the application using 'wine app_name.exe' command, i get an error saying
002e:err:module:import_dll Library mfc140u.dll (which is needed by L"path_to_my_application_library") not found
I tried to install mfc140u via Winetrichs GUI using 'Install a Windows DLL or component' option but it seems not to be listed anywhere on the list of the available packages. Does anyone know how to make it available?
Make sure you are using the most up-to-date version of Wine (currently Wine 4). You can check by running:
wine --version
If you need to upgrade Wine, check out the instructions here.
That dll is a part of Visual C++ redistributable. You'll need to install it so the application will work. Instructions are here.
I don't use Wine, so there could be additional steps, but in the interest of helping:
I believe you need the appropriate version of the VC++ redistributable (Visual Studio C++ runtime). You need to install the version that the application you try to run was compiled with. Just start with the latest one and install and then install older versions if need be. MSDN Forums.
Download
vc_redist.x64.exe
from
https://www.microsoft.com/en-us/download/details.aspx?id=48145
from console run
wine uninstaller
uninstall any existing runtime version, then select "install" and browse for the vc_redist.x64.exe file, accept. Execute your Windows appplication
When i start android device monitor in android studio "Java has started but returned exit code = 13" error with java path files is displayed.
I am using "android studio (beta)0.89"
I fixed this problem on my Windows 7 computer by installing the 64 bit version of Java 8. I did not have to uninstall or downgrade Java.
Be careful when downloading the Java installation. According to this FAQ, you will probably end up with 32 bit if you use the default installation.
Manually select the 'Windows Offline (64-bit)' version here, rather than letting the Java website choose for you.
This has happened to me just now after installing the latest Java version (v8) which for some reason only comes with 32-bit support while my PC is 64-bit.
I fixed the issue by uninstalling the version 8 of Java which automatically downgraded to Java 7 and it works fine.
I have been able to fix this issue by uninstalling the 32-bit Java 8 version I had, and then installing the latest 64-bit Java 8 version instead. (I didn't have to downgrade)
I think you are trying to open the wrong version of the monitor.exe it might have been changed during an upgrade. Under sdk/tools/lib there should be both the 32 and 64 bit versions under the "monitor-x86 or _64" folder. try either one if it works good. If you want to download the 64bit java version you must use a 64 bit browser. example in IExplorer 11 + you can change it back to 32 bit and back to 64 bit when needed. I did try the java upgrade before and was still getting the java error.
Install both 32 and 64 bit of Java 8. That fixed it for me.
Follow the path provided in the error pop-up. Add the java path in the eclipse.ini file located in the monitor folder in android studio.
Add : -vm
C:\Program Files\Java\jre7\bin\java.exe(Path to your current java file)
Before: -vmargs
If you are running win8.X just go to control panel and uninstall the java 8 version and after everything works fine.
I ran into this issue, even though I had the latest x64 build of the Java 8 JDK installed and set to the JAVA_HOME environment variable.
For me at least, the first line of the error popup shows that it is using Oracle's symlink at C:\ProgramData\Oracle\Java\javapath to find the correct location of javaw.exe. In my case, this was actually pointing to the x86 build of the same version of the JRE, which I also had installed for some reason.
I ended up cleaning house and uninstalling all versions of JRE/JDK, and then reinstalling the latest x64 JDK. This realigned the symlinks, and now it's running smoothly.
Most of the other answers should help resolve this same problem, but for diagnostic purposes if you do have the x64 version installed already, it will probably help to check C:\ProgramData\Oracle\Java\javapath.
[SOLUTION]
Go to following file in your android SDK
Sdk\tools\lib\monitor-x86_64\monitor.ini
and add following line, you might have to change the path to your java
-vm C:\Program Files\Java\jre7\bin\java.exe
just before "-vmargs "
Found solution:
Uninstall Java 8 Update (64-bit)
Install Java 7 Update 71 (64 bit)
I also downgraded JDK from 8 to 7, but it might be not required
I have JDK 7(64bit) Netbeans 7.2 and OpenCV 2.4. I already set the
path variable by adding the relavant OpenCV paths. But the program
stile give the that error when executing.
I already run my program on 32bit environment with JDK7(32bit) Netbeans 7.2 and OpenCV 2.4; In that case the programe execute perfectly.
Can any one help me to figure out the problem when i use 64bit environment
Install JDK7 (64 bit).
Copy the OpenCV directory to your windows (C) drive.
Install microsoft c++ 2010 redistributable x64.
Make "C:\opencv\build\common\tbb" as yor path in environment variables.
Download javacv-0.1.jar and make this as your library file in your project.
If the problem exist download cv100.dll, cvcam100.dll,cxcore100.dll,opencv_highgui220.dll from internet and copy this to system32.
Can somebody tell me how to do this? Or, point me to a good link?
I want to install Jmeter but "./jmeter" tells me that:
Error: no server' JVM atC:\Program
Files\Java\jre1.6.0\bin\server\jvm.dll'.
So, I need to get the server JVM up and running.
I have been attempting to download and install the JDK from
http://www.oracle.com/technetwork/java/javase/downloads/jdk-6u25-download-346242.html
And got a corrupted file error when I tried to install:
jdk-6u25-linux-ia64-rpm.bin
Should I be doing this via wget or apt-cyg? Or, how do i determine which installation
package I should be downloading from the oracle/sun downloads page?
Thanks in advance.
You are on Windows so you should try the Windows x86 version unless there is a particular reason why you want to do that with Cygwin. Or try this:
Copy 'server' folder from the JDK's JRE's bin folder (example: C:\Program Files\Java\jdk1.6.0\jre\bin\server)
Paste the 'server' folder to JRE's bin folder (example: C:\Program Files\Java\jre1.6.0\bin)
Cygwin aims for Linux source compatibility, but it does not provide Linux binary compatibility. This means that programs have to be built specifically for Cygwin and that Linux binaries such as the linux-ia64 JVM mentioned here will not run on Cygwin.
Perhaps it is possible to build the OpenJDK JVM for Cygwin, but it doesn't ship with Cygwin. The Cygwin Ports repository contains a package for the lightweight JamVM.
But in any case, JMeter was looking for the native Windows version of the JVM, so you probably just want to install that, as Jano already suggested.