I need to remove an element from an array in bash shell.
Generally I'd simply do:
array=("${(#)array:#<element to remove>}")
Unfortunately the element I want to remove is a variable so I can't use the previous command.
Down here an example:
array+=(pluto)
array+=(pippo)
delete=(pluto)
array( ${array[#]/$delete} ) -> but clearly doesn't work because of {}
Any idea?
The following works as you would like in bash and zsh:
$ array=(pluto pippo)
$ delete=pluto
$ echo ${array[#]/$delete}
pippo
$ array=( "${array[#]/$delete}" ) #Quotes when working with strings
If need to delete more than one element:
...
$ delete=(pluto pippo)
for del in ${delete[#]}
do
array=("${array[#]/$del}") #Quotes when working with strings
done
Caveat
This technique actually removes prefixes matching $delete from the elements, not necessarily whole elements.
Update
To really remove an exact item, you need to walk through the array, comparing the target to each element, and using unset to delete an exact match.
array=(pluto pippo bob)
delete=(pippo)
for target in "${delete[#]}"; do
for i in "${!array[#]}"; do
if [[ ${array[i]} = $target ]]; then
unset 'array[i]'
fi
done
done
Note that if you do this, and one or more elements is removed, the indices will no longer be a continuous sequence of integers.
$ declare -p array
declare -a array=([0]="pluto" [2]="bob")
The simple fact is, arrays were not designed for use as mutable data structures. They are primarily used for storing lists of items in a single variable without needing to waste a character as a delimiter (e.g., to store a list of strings which can contain whitespace).
If gaps are a problem, then you need to rebuild the array to fill the gaps:
for i in "${!array[#]}"; do
new_array+=( "${array[i]}" )
done
array=("${new_array[#]}")
unset new_array
You could build up a new array without the undesired element, then assign it back to the old array. This works in bash:
array=(pluto pippo)
new_array=()
for value in "${array[#]}"
do
[[ $value != pluto ]] && new_array+=($value)
done
array=("${new_array[#]}")
unset new_array
This yields:
echo "${array[#]}"
pippo
This is the most direct way to unset a value if you know it's position.
$ array=(one two three)
$ echo ${#array[#]}
3
$ unset 'array[1]'
$ echo ${array[#]}
one three
$ echo ${#array[#]}
2
This answer is specific to the case of deleting multiple values from large arrays, where performance is important.
The most voted solutions are (1) pattern substitution on an array, or (2) iterating over the array elements. The first is fast, but can only deal with elements that have distinct prefix, the second has O(n*k), n=array size, k=elements to remove. Associative array are relative new feature, and might not have been common when the question was originally posted.
For the exact match case, with large n and k, possible to improve performance from O(nk) to O(n+klog(k)). In practice, O(n) assuming k much lower than n. Most of the speed up is based on using associative array to identify items to be removed.
Performance (n-array size, k-values to delete). Performance measure seconds of user time
N K New(seconds) Current(seconds) Speedup
1000 10 0.005 0.033 6X
10000 10 0.070 0.348 5X
10000 20 0.070 0.656 9X
10000 1 0.043 0.050 -7%
As expected, the current solution is linear to N*K, and the fast solution is practically linear to K, with much lower constant. The fast solution is slightly slower vs the current solution when k=1, due to additional setup.
The 'Fast' solution: array=list of input, delete=list of values to remove.
declare -A delk
for del in "${delete[#]}" ; do delk[$del]=1 ; done
# Tag items to remove, based on
for k in "${!array[#]}" ; do
[ "${delk[${array[$k]}]-}" ] && unset 'array[k]'
done
# Compaction
array=("${array[#]}")
Benchmarked against current solution, from the most-voted answer.
for target in "${delete[#]}"; do
for i in "${!array[#]}"; do
if [[ ${array[i]} = $target ]]; then
unset 'array[i]'
fi
done
done
array=("${array[#]}")
Here's a one-line solution with mapfile:
$ mapfile -d $'\0' -t arr < <(printf '%s\0' "${arr[#]}" | grep -Pzv "<regexp>")
Example:
$ arr=("Adam" "Bob" "Claire"$'\n'"Smith" "David" "Eve" "Fred")
$ echo "Size: ${#arr[*]} Contents: ${arr[*]}"
Size: 6 Contents: Adam Bob Claire
Smith David Eve Fred
$ mapfile -d $'\0' -t arr < <(printf '%s\0' "${arr[#]}" | grep -Pzv "^Claire\nSmith$")
$ echo "Size: ${#arr[*]} Contents: ${arr[*]}"
Size: 5 Contents: Adam Bob David Eve Fred
This method allows for great flexibility by modifying/exchanging the grep command and doesn't leave any empty strings in the array.
Partial answer only
To delete the first item in the array
unset 'array[0]'
To delete the last item in the array
unset 'array[-1]'
To expand on the above answers, the following can be used to remove multiple elements from an array, without partial matching:
ARRAY=(one two onetwo three four threefour "one six")
TO_REMOVE=(one four)
TEMP_ARRAY=()
for pkg in "${ARRAY[#]}"; do
for remove in "${TO_REMOVE[#]}"; do
KEEP=true
if [[ ${pkg} == ${remove} ]]; then
KEEP=false
break
fi
done
if ${KEEP}; then
TEMP_ARRAY+=(${pkg})
fi
done
ARRAY=("${TEMP_ARRAY[#]}")
unset TEMP_ARRAY
This will result in an array containing:
(two onetwo three threefour "one six")
Here's a (probably very bash-specific) little function involving bash variable indirection and unset; it's a general solution that does not involve text substitution or discarding empty elements and has no problems with quoting/whitespace etc.
delete_ary_elmt() {
local word=$1 # the element to search for & delete
local aryref="$2[#]" # a necessary step since '${!$2[#]}' is a syntax error
local arycopy=("${!aryref}") # create a copy of the input array
local status=1
for (( i = ${#arycopy[#]} - 1; i >= 0; i-- )); do # iterate over indices backwards
elmt=${arycopy[$i]}
[[ $elmt == $word ]] && unset "$2[$i]" && status=0 # unset matching elmts in orig. ary
done
return $status # return 0 if something was deleted; 1 if not
}
array=(a 0 0 b 0 0 0 c 0 d e 0 0 0)
delete_ary_elmt 0 array
for e in "${array[#]}"; do
echo "$e"
done
# prints "a" "b" "c" "d" in lines
Use it like delete_ary_elmt ELEMENT ARRAYNAME without any $ sigil. Switch the == $word for == $word* for prefix matches; use ${elmt,,} == ${word,,} for case-insensitive matches; etc., whatever bash [[ supports.
It works by determining the indices of the input array and iterating over them backwards (so deleting elements doesn't screw up iteration order). To get the indices you need to access the input array by name, which can be done via bash variable indirection x=1; varname=x; echo ${!varname} # prints "1".
You can't access arrays by name like aryname=a; echo "${$aryname[#]}, this gives you an error. You can't do aryname=a; echo "${!aryname[#]}", this gives you the indices of the variable aryname (although it is not an array). What DOES work is aryref="a[#]"; echo "${!aryref}", which will print the elements of the array a, preserving shell-word quoting and whitespace exactly like echo "${a[#]}". But this only works for printing the elements of an array, not for printing its length or indices (aryref="!a[#]" or aryref="#a[#]" or "${!!aryref}" or "${#!aryref}", they all fail).
So I copy the original array by its name via bash indirection and get the indices from the copy. To iterate over the indices in reverse I use a C-style for loop. I could also do it by accessing the indices via ${!arycopy[#]} and reversing them with tac, which is a cat that turns around the input line order.
A function solution without variable indirection would probably have to involve eval, which may or may not be safe to use in that situation (I can't tell).
Using unset
To remove an element at particular index, we can use unset and then do copy to another array. Only just unset is not required in this case. Because unset does not remove the element it just sets null string to the particular index in array.
declare -a arr=('aa' 'bb' 'cc' 'dd' 'ee')
unset 'arr[1]'
declare -a arr2=()
i=0
for element in "${arr[#]}"
do
arr2[$i]=$element
((++i))
done
echo "${arr[#]}"
echo "1st val is ${arr[1]}, 2nd val is ${arr[2]}"
echo "${arr2[#]}"
echo "1st val is ${arr2[1]}, 2nd val is ${arr2[2]}"
Output is
aa cc dd ee
1st val is , 2nd val is cc
aa cc dd ee
1st val is cc, 2nd val is dd
Using :<idx>
We can remove some set of elements using :<idx> also. For example if we want to remove 1st element we can use :1 as mentioned below.
declare -a arr=('aa' 'bb' 'cc' 'dd' 'ee')
arr2=("${arr[#]:1}")
echo "${arr2[#]}"
echo "1st val is ${arr2[1]}, 2nd val is ${arr2[2]}"
Output is
bb cc dd ee
1st val is cc, 2nd val is dd
http://wiki.bash-hackers.org/syntax/pe#substring_removal
${PARAMETER#PATTERN} # remove from beginning
${PARAMETER##PATTERN} # remove from the beginning, greedy match
${PARAMETER%PATTERN} # remove from the end
${PARAMETER%%PATTERN} # remove from the end, greedy match
In order to do a full remove element, you have to do an unset command with an if statement. If you don't care about removing prefixes from other variables or about supporting whitespace in the array, then you can just drop the quotes and forget about for loops.
See example below for a few different ways to clean up an array.
options=("foo" "bar" "foo" "foobar" "foo bar" "bars" "bar")
# remove bar from the start of each element
options=("${options[#]/#"bar"}")
# options=("foo" "" "foo" "foobar" "foo bar" "s" "")
# remove the complete string "foo" in a for loop
count=${#options[#]}
for ((i = 0; i < count; i++)); do
if [ "${options[i]}" = "foo" ] ; then
unset 'options[i]'
fi
done
# options=( "" "foobar" "foo bar" "s" "")
# remove empty options
# note the count variable can't be recalculated easily on a sparse array
for ((i = 0; i < count; i++)); do
# echo "Element $i: '${options[i]}'"
if [ -z "${options[i]}" ] ; then
unset 'options[i]'
fi
done
# options=("foobar" "foo bar" "s")
# list them with select
echo "Choose an option:"
PS3='Option? '
select i in "${options[#]}" Quit
do
case $i in
Quit) break ;;
*) echo "You selected \"$i\"" ;;
esac
done
Output
Choose an option:
1) foobar
2) foo bar
3) s
4) Quit
Option?
Hope that helps.
There is also this syntax, e.g. if you want to delete the 2nd element :
array=("${array[#]:0:1}" "${array[#]:2}")
which is in fact the concatenation of 2 tabs. The first from the index 0 to the index 1 (exclusive) and the 2nd from the index 2 to the end.
POSIX shell script does not have arrays.
So most probably you are using a specific dialect such as bash, korn shells or zsh.
Therefore, your question as of now cannot be answered.
Maybe this works for you:
unset array[$delete]
What I do is:
array="$(echo $array | tr ' ' '\n' | sed "/itemtodelete/d")"
BAM, that item is removed.
This is a quick-and-dirty solution that will work in simple cases but will break if (a) there are regex special characters in $delete, or (b) there are any spaces at all in any items. Starting with:
array+=(pluto)
array+=(pippo)
delete=(pluto)
Delete all entries exactly matching $delete:
array=(`echo $array | fmt -1 | grep -v "^${delete}$" | fmt -999999`)
resulting in
echo $array -> pippo, and making sure it's an array:
echo $array[1] -> pippo
fmt is a little obscure: fmt -1 wraps at the first column (to put each item on its own line. That's where the problem arises with items in spaces.) fmt -999999 unwraps it back to one line, putting back the spaces between items. There are other ways to do that, such as xargs.
Addendum: If you want to delete just the first match, use sed, as described here:
array=(`echo $array | fmt -1 | sed "0,/^${delete}$/{//d;}" | fmt -999999`)
Actually, I just noticed that the shell syntax somewhat has a behavior built-in that allows for easy reconstruction of the array when, as posed in the question, an item should be removed.
# let's set up an array of items to consume:
x=()
for (( i=0; i<10; i++ )); do
x+=("$i")
done
# here, we consume that array:
while (( ${#x[#]} )); do
i=$(( $RANDOM % ${#x[#]} ))
echo "${x[i]} / ${x[#]}"
x=("${x[#]:0:i}" "${x[#]:i+1}")
done
Notice how we constructed the array using bash's x+=() syntax?
You could actually add more than one item with that, the content of a whole other array at once.
In ZSH this is dead easy (note this uses more bash compatible syntax than necessary where possible for ease of understanding):
# I always include an edge case to make sure each element
# is not being word split.
start=(one two three 'four 4' five)
work=(${(#)start})
idx=2
val=${work[idx]}
# How to remove a single element easily.
# Also works for associative arrays (at least in zsh)
work[$idx]=()
echo "Array size went down by one: "
[[ $#work -eq $(($#start - 1)) ]] && echo "OK"
echo "Array item "$val" is now gone: "
[[ -z ${work[(r)$val]} ]] && echo OK
echo "Array contents are as expected: "
wanted=("${start[#]:0:1}" "${start[#]:2}")
[[ "${(j.:.)wanted[#]}" == "${(j.:.)work[#]}" ]] && echo "OK"
echo "-- array contents: start --"
print -l -r -- "-- $#start elements" ${(#)start}
echo "-- array contents: work --"
print -l -r -- "-- $#work elements" "${work[#]}"
Results:
Array size went down by one:
OK
Array item two is now gone:
OK
Array contents are as expected:
OK
-- array contents: start --
-- 5 elements
one
two
three
four 4
five
-- array contents: work --
-- 4 elements
one
three
four 4
five
To avoid conflicts with array index using unset - see https://stackoverflow.com/a/49626928/3223785 and https://stackoverflow.com/a/47798640/3223785 for more information - reassign the array to itself: ARRAY_VAR=(${ARRAY_VAR[#]}).
#!/bin/bash
ARRAY_VAR=(0 1 2 3 4 5 6 7 8 9)
unset ARRAY_VAR[5]
unset ARRAY_VAR[4]
ARRAY_VAR=(${ARRAY_VAR[#]})
echo ${ARRAY_VAR[#]}
A_LENGTH=${#ARRAY_VAR[*]}
for (( i=0; i<=$(( $A_LENGTH -1 )); i++ )) ; do
echo ""
echo "INDEX - $i"
echo "VALUE - ${ARRAY_VAR[$i]}"
done
exit 0
[Ref.: https://tecadmin.net/working-with-array-bash-script/ ]
How about something like:
array=(one two three)
array_t=" ${array[#]} "
delete=one
array=(${array_t// $delete / })
unset array_t
#/bin/bash
echo "# define array with six elements"
arr=(zero one two three 'four 4' five)
echo "# unset by index: 0"
unset -v 'arr[0]'
for i in ${!arr[*]}; do echo "arr[$i]=${arr[$i]}"; done
arr_delete_by_content() { # value to delete
for i in ${!arr[*]}; do
[ "${arr[$i]}" = "$1" ] && unset -v 'arr[$i]'
done
}
echo "# unset in global variable where value: three"
arr_delete_by_content three
for i in ${!arr[*]}; do echo "arr[$i]=${arr[$i]}"; done
echo "# rearrange indices"
arr=( "${arr[#]}" )
for i in ${!arr[*]}; do echo "arr[$i]=${arr[$i]}"; done
delete_value() { # value arrayelements..., returns array decl.
local e val=$1; new=(); shift
for e in "${#}"; do [ "$val" != "$e" ] && new+=("$e"); done
declare -p new|sed 's,^[^=]*=,,'
}
echo "# new array without value: two"
declare -a arr="$(delete_value two "${arr[#]}")"
for i in ${!arr[*]}; do echo "arr[$i]=${arr[$i]}"; done
delete_values() { # arraydecl values..., returns array decl. (keeps indices)
declare -a arr="$1"; local i v; shift
for v in "${#}"; do
for i in ${!arr[*]}; do
[ "$v" = "${arr[$i]}" ] && unset -v 'arr[$i]'
done
done
declare -p arr|sed 's,^[^=]*=,,'
}
echo "# new array without values: one five (keep indices)"
declare -a arr="$(delete_values "$(declare -p arr|sed 's,^[^=]*=,,')" one five)"
for i in ${!arr[*]}; do echo "arr[$i]=${arr[$i]}"; done
# new array without multiple values and rearranged indices is left to the reader
Below is my requirement. I have a text file that has following content
File name - abc.txt
Content -
apple=0
mango=1
strawberry=10
I need to kick off the subsequent process only if any of the above stated variable has non zero values.
In this case, As two variables have values 1 and 10 respectively, I need to update an indicator - SKIP INDICATOR=N
If all variables have 0 as value, I need to update SKIP INDICATOR=Y
How to achieve this functionality in Linux. Kindly advise.
with very simple greps :
if [ $(grep '=' your_file | grep -v '=0') ]
then
echo "non zero values detected"
SKIP_INDICATOR=N
else
echo "all are zeroes"
SKIP_INDICATOR=Y
fi
Just note that this is a quick and dirty solution and it would NOT work properly if you have for example a=01 or a= 0 (eg with space)
Try:
grep -q '=0*[1-9]' textfile && skip_indicator=N || skip_indicator=Y
=0*[1-9] matches an '=' character followed by zero or more '0' characters followed by a digit in the range 1 to 9.
See Correct Bash and shell script variable capitalization for an explanation of why I changed SKIP_INDICATOR to skip_indicator.
#!/bin/bash
flag=`awk -F'=' '$NF!="0"{print;exit}' input`
if [ ! -z $flag ] ; then
SKIP_INDICATOR=N
echo "some variable value is different from 0. do something"
else
SKIP_INDICATOR=Y
echo "all variables have 0 as value. do another thing."
fi
exit 0
I have this:
for (( count= "$WP_RANGE_START"; count< "$WP_RANGE_STOP"+1; count=count+1 ));
Where WP_RANGE_STARTis a number like 1 and WP_RANGE_STOPis a number like 10.
Right now this will step though going 1,2,...10
How can I do so that it counts backwards?(10,9,...1)
I guess the mirror image of what you have would be
for (( count="$WP_RANGE_STOP"; count >= "$WP_RANGE_START"; count=count-1 ));
But a less cumbersome way to write it would be
for (( count=WP_RANGE_STOP; count >= WP_RANGE_START; count-- ));
The $ is unnecessary in arithmetic context.
When dealing with literals, bash has a range expansion feature using brace expansion:
for i in {0..10}; # or {10..0} or what have you
But it's cumbersome to use with variables, as the brace expansion happens before parameter expansion. It's usually easier to use arithmetic for loops in those cases.
Your incrementing code can be "simplified" as:
for count in $(eval echo {$WP_RANGE_START..$WP_RANGE_STOP});
So, to decrement you can just reverse the parameters"
for count in $(eval echo {$WP_RANGE_STOP..$WP_RANGE_START});
Assuming you've got a bash version of 3 or higher, you can specify an increment or decrement by appending it to the range, like so:
CHANGE=1
for count in $(eval echo {$WP_RANGE_STOP..$WP_RANGE_START..$CHANGE});
The for loop is your problem.
i=11 ; until [ $((i=i-1)) -lt 1 ] ; do echo $i ; done
OUTPUT
10
9
8
7
6
5
4
3
2
1
You don't need any bashisms at all.
The following code gives
[: -ge: unary operator expected
when
i=0
if [ $i -ge 2 ]
then
#some code
fi
why?
Your problem arises from the fact that $i has a blank value when your statement fails. Always quote your variables when performing comparisons if there is the slightest chance that one of them may be empty, e.g.:
if [ "$i" -ge 2 ] ; then
...
fi
This is because of how the shell treats variables. Assume the original example,
if [ $i -ge 2 ] ; then ...
The first thing that the shell does when executing that particular line of code is substitute the value of $i, just like your favorite editor's search & replace function would. So assume that $i is empty or, even more illustrative, assume that $i is a bunch of spaces! The shell will replace $i as follows:
if [ -ge 2 ] ; then ...
Now that variable substitutions are done, the shell proceeds with the comparison and.... fails because it cannot see anything intelligible to the left of -gt. However, quoting $i:
if [ "$i" -ge 2 ] ; then ...
becomes:
if [ " " -ge 2 ] ; then ...
The shell now sees the double-quotes, and knows that you are actually comparing four blanks to 2 and will skip the if.
You also have the option of specifying a default value for $i if $i is blank, as follows:
if [ "${i:-0}" -ge 2 ] ; then ...
This will substitute the value 0 instead of $i is $i is undefined. I still maintain the quotes because, again, if $i is a bunch of blanks then it does not count as undefined, it will not be replaced with 0, and you will run into the problem once again.
Please read this when you have the time. The shell is treated like a black box by many, but it operates with very few and very simple rules - once you are aware of what those rules are (one of them being how variables work in the shell, as explained above) the shell will have no more secrets for you.
Judging from the error message the value of i was the empty string when you executed it, not 0.
I need to add my 5 cents. I see everybody use [ or [[, but it worth to mention that they are not part of if syntax.
For arithmetic comparisons, use ((...)) instead.
((...)) is an arithmetic command, which returns an exit status of 0 if
the expression is nonzero, or 1 if the expression is zero. Also used
as a synonym for "let", if side effects (assignments) are needed.
See: ArithmeticExpression
Your piece of script works just great. Are you sure you are not assigning anything else before the if to "i"?
A common mistake is also not to leave a space after and before the square brackets.