It happens sometimes that I have to look into various log and trace files on Windows and generally I use for the purpose VIM.
My problem though is that I still can't find any analog of grep -v inside of VIM: find in the buffer a line not matching given regular expression. E.g. log file is filled with lines which somewhere in a middle contain phrase all is ok and I need to find first line which doesn't contain all is ok.
I can write a custom function for that, yet at the moment that seems to be an overkill and likely to be slower than a native solution.
Is there any easy way to do it in VIM?
I believe if you simply want to have your cursor end up at the first non-matching line you can use visual as the command in your global command. So:
:v/pattern/visual
will leave your cursor at the first non-matching line. Or:
:g/pattern/visual
will leave your cursor at the first matching line.
you can use negative look-behind operator #<!
e.g. to find all lines not containing "a", use /\v^.+(^.*a.*$)#<!$
(\v just causes some operators like ( and #<! not to must have been backslash escaped)
the simpler method is to delete all lines matching or not matching the pattern (:g/PATTERN/d or :g!/PATTERN/d respectively)
I'm often in your case, so to "clean" the logs files I use :
:g/all is ok/d
Your grep -v can be achieved with
:v/error/d
Which will remove all lines which does not contain error.
It's probably already too late, but I think that this should be said somewhere.
Vim (since version about 7.4) comes with a plugin called LogiPat, which makes searching for lines which don't contain some string really easy. So using this plugin finding the lines not containing all is ok is done like this:
:LogiPat !"all is ok"
And then you can jump between the matching (or in this case not matching) lines with n and N.
You can also use logical operations like & and | to join different strings in one pattern:
:LP !("foo"|"bar")&"baz"
LP is shorthand for LogiPat, and this command will search for lines that contain the word baz and don't contain neither foo nor bar.
I just managed a somewhat klutzy procedure using the "g" command:
:%g!/search/p
This says to print out the non-matching lines... not sure if that worked, but it did end up with the cursor positioned on the first non-matching line.
(substitute some other string for "search", of course)
You can search with following line and press n to jump to the first non-matching line
^\(.*all is ok\)\#!.*$
Breakdown of operators:
^ -> means start of the line
\( and \) -> To match a whole string multiple times, it must be grouped into one item. This is done by putting "\(" before it and "\)" after it.
\#! -> Matches with zero width if the preceding atom does NOT match at the current position.
.* -> Matches any character repeated 1 or more times
$ -> end of the line
Here is sample animation how it works. For simplicity I searched for word apple.
You can iterate through the non-matches using g and a null substitution:
:g!/pattern/s/^//c
If you reply "n" each time you wont even mark the file as changed.
You need ctrl-C to escape from the circle (or keep going to bottom of file).
Related
I'm new into vim, I have hug text file as follow:
ZK792.6,ZK792.6(let-60),cel-miR-62(18),0.239
UTR3,IV:11688688-11688716,0.0670782
ZC449.3b,ZC449.3(ZC449.3),cel-miR-62(18),0.514
UTR3,X:5020692-5020720,0.355907
First, I would like to get delete all rows with even numbers (2,4,6...).
Second, I would like to remove (18) from entire file. as a example:
cel-miR-62(18) would be cel-miR-62.
Third: How can I get delete all parentheses including it's inside?
Would someone help me with this?
For the first one:
:g/[02468]\>/d
where :g matches all lines by the regex between the slashes and runs d (delete line) on the matching lines. The regex is quite easy to read, the only interesting symbol there is perhaps the \>, which matches end of a word.
For the second question:
:%s/\V(18)//g
where % is the specification meaning "all lines of the file", s is the substitute command, \V sets the "very nomagic" mode of regexes (not sure what your default is, you might not need this) and the final g makes vim substitute all occurrences on each line (with an empty string, the one between slashes). Make sure that :set gdefault? prints nogdefault (the default setting of gdefault), otherwise, drop the final g from the substitute command.
To remove every even line (or every other line):
:g/^/+d
To remove every instance of (18):
:%s/(18)//g
Remove all the parenthetical content:
:%s/(.\\{-})//g
Note: the pattern in third answer is a non-greedy match.
I'm trying to figure out how to dt or df the last occurrence of a character in a string.
For example, let's say I have the following line:
foo not.relevant.text.bar
If I f df. I expectedly get foo relevant.text.bar but I would like to get foo bar. Using f 3df. is not an option as I don't know how many of that character will be in the string. Additionally, I may want to get foo .bar (f 3dt.), or if the line ends with a dot, I may want to get foo .. I want to always find the last one regardless of how many there are.
Is this possible without a regex? I suppose I could use a regex but I was hoping there was a simple vim command that I'm missing. I find myself trying to do something like this often.
one way without using regex, without counting "dot" (could be other letters)... see if others have better way..
foo[I]not.relevant.text.bar ([I] is cursor)
you could try:
lmm$T.d`m
or in this format, may look better?
lmm$T.d`m
this will do the job. you could create a mapping if you use that often.
EDIT
I add a GIF animation to show it works. :)
note
I typed #= in normal mode after moving my cursor to the right starting point (by f(space)), to display the keys I pressed in command line.
You can use my JumpToLastOccurrence plugin. It provides ,f / ,F / ,t / ,T commands that do just that.
I would use f df...
It is not necessarily shorter to type, but I find it easier to use "repeat last command" than counting in advance the number of word/sentence I want to delete.
Then you can adjust the number of . you type to adjust the length of the string you want to delete.
For your example: ET.dB
foo not.relevant.text.bar
And it works, as long as the cursor is anywhere within the text following "foo".
Strip Path from Path+Filename: ET/dB
I use it for stripping a pathname of all but the trailing filename.
Strip the path from /some/long/path/filename.ext leaving only the filename.
Just as long as:
The cursor is anywhere within the bold word
There are no spaces in that word
E Go to the end (since there are no spaces - also works if not the last thing on the line)
T/ Find the last / (stop just after it, so it will be deleted, as well)
dB Delete to the beginning of the word
In visual mode:
$F.d^
The $ goes to the end of the current line, F searches backward for a period and d^ deletes till the beginning of the line.
Let's say I have the following line of code:
something:somethingElse:anotherThing:woahYetAnotherThing
And I want to replace each : with a ; except the first one, such that the line looks like this:
something:somethingElse;anotherThing;woahYetAnotherThing
Is there a way to do this with the :[range]s/[search]/[replace]/[options] command without using the c option to confirm each replace operation?
As far as I can tell, the smallest range that s acts on is a single line. If this is true, then what is the fastest way to do the above task?
I'm fairly new to vim myself; I think you're right about range being lines-only (not 100% certain), but for this specific example you might try replacing all of the instances with a global flag, and then putting back the first one by omitting the global -- something like :s/:/;/g|s/;/:/.
Note: if the line contains a ; before the first : then this will not work.
Here you go...
:%s/\(:.*\):/\1;/|&|&|&|&
This is a simple regex substitute that takes care of one single not-the-first :.
The & command repeats the last substitute.
The | syntax separates multiple commands on one line. So, each substitute is repeated as many times as there are |& things.
Here is how you could use a single keystroke to do what you want (by mapping capital Q):
map Q :s/:/;/g\|:s/;/:<Enter>j
Every time you press Q the current line will be modified and the cursor will move to the next line.
In other words, you could just keep hitting Q multiple times to edit each successive line.
Explanation:
This will operate globally on the current line:
:s/:/;/g
This will switch the first semi-colon back to a colon:
:s/;/:
The answer by #AlliedEnvy combines these into one statement.
My map command assigns #AlliedEnvy's answer to the capital Q character.
Another approach (what I would probably do if I only had to do this once):
f:;r;;.
Then you can repeatedly press ;. until you reach the end of the line.
(Your choice to replace a semi-colon makes this somewhat comfusing)
Explanation:
f: - go to the first colon
; - go to the next colon (repeat in-line search)
r; - replace the current character with a semi-colon
; - repeat the last in-line search (again)
. - repeat the last command (replace current character with a semi-colon)
Long story short:
fx - moves to the next occurrence of x on the current line
; repeats the last inline search
While the other answers work well for this particular case, here's a more general solution:
Create a visual selection starting from the second element to the end of the line. Then, limit the substitution to the visual area by including \%V:
:'<,'>s/\%V:/;/g
Alternatively, you can use the vis.vim plugin
:'<,'>B s/:/;/g
I'm learning the power of g and want to delete all lines containing an expression, to the end of the sentence (marked by a period). Like so:
There was a little sheep. The sheep was black. There was another sheep.
(Run command to find all sentences like There was and delete to the next period).
The sheep was black.
I've tried:
:g/There was/d\/\. in an attempt to "delete forward until the next period" but I get a trailing characters error.
:g/There was/df. but get a df. is not an editor command error.
Any thoughts?
The action associated with g must be able to act on the line without needing position information from the pattern match that g implies. In the command you are using, the delete forward command needs a starting position that is not being provided.
The problem is that g only indicates a line match, not a specific character position for it's pattern match. I did the following and it did what I think you want:
:g/There was/s/There was[^.]*[.]//
This found lines that matched the pattern There was, and performed a substitution of the regular expression There was[^.]*[.] with the empty string.
This is equivalent to:
:1,$s/There was[^.]*[.]//g
I'm not sure what the g is getting you in your use case, except the automatic application to the entire file line range (same as 1,$ or %). The g in this latter example has to do with applying the substitution to all patterns on the same line, not with the range of lines affected by the substitution command.
I'd just use a regex:
%s/There was\_.\{-}\.\s\?//ge
Note how \_. allows for cross-line sentences
You can use :norm like this:
:g/There was/norm 0weldf.
This finds lines with "There was" then executes the normal commands 0weldf..
0: go to beginning of line
w: go to next word (in this case, "was")
e: go the end of the word (so cursor is on the 's' of "was")
l: move one character to the right (so we don't delete any of "was")
df.: delete until the next '.', inclusive.
If you want to keep the period use dt. instead of df..
If you don't want to delete from the beginning of the line and instead want to do sentences, the :%s command is probably more appropriate here. (e.g. :%s/\(There was\)[^.]*\./\1/g or %s/\(There was\)[^.]*\./\1./g if you want to keep the period at the end of the sentence.
Use search and replace:
:%s/There was[^.]*\.\s*//g
I want to search for a string and find the number of occurrences in a file using the vi editor.
THE way is
:%s/pattern//gn
You need the n flag. To count words use:
:%s/\i\+/&/gn
and a particular word:
:%s/the/&/gn
See count-items documentation section.
If you simply type in:
%s/pattern/pattern/g
then the status line will give you the number of matches in vi as well.
:%s/string/string/g
will give the answer.
(similar as Gustavo said, but additionally: )
For any previously search, you can do simply:
:%s///gn
A pattern is not needed, because it is already in the search-register (#/).
"%" - do s/ in the whole file
"g" - search global (with multiple hits in one line)
"n" - prevents any replacement of s/ -- nothing is deleted! nothing must be undone!
(see: :help s_flag for more informations)
(This way, it works perfectly with "Search for visually selected text", as described in vim-wikia tip171)
:g/xxxx/d
This will delete all the lines with pattern, and report how many deleted. Undo to get them back after.
Short answer:
:%s/string-to-be-searched//gn
For learning:
There are 3 modes in VI editor as below
: you are entering from Command to Command-line mode. Now, whatever you write after : is on CLI(Command Line Interface)
%s specifies all lines. Specifying the range as % means do substitution in the entire file. Syntax for all occurrences substitution is :%s/old-text/new-text/g
g specifies all occurrences in the line. With the g flag , you can make the whole line to be substituted. If this g flag is not used then only first occurrence in the line only will be substituted.
n specifies to output number of occurrences
//double slash represents omission of replacement text. Because we just want to find.
Once got the number of occurrences, you can Press N Key to see occurrences one-by-one.
For finding and counting in particular range of line number 1 to 10:
:1,10s/hello//gn
Please note, % for whole file is repleaced by , separated line numbers.
For finding and replacing in particular range of line number 1 to 10:
:1,10s/helo/hello/gn
use
:%s/pattern/\0/g
when pattern string is too long and you don't like to type it all again.
I suggest doing:
Search either with * to do a "bounded search" for what's under the cursor, or do a standard /pattern search.
Use :%s///gn to get the number of occurrences. Or you can use :%s///n to get the number of lines with occurrences.
** I really with I could find a plug-in that would giving messaging of "match N of N1 on N2 lines" with every search, but alas.
Note:
Don't be confused by the tricky wording of the output. The former command might give you something like 4 matches on 3 lines where the latter might give you 3 matches on 3 lines. While technically accurate, the latter is misleading and should say '3 lines match'. So, as you can see, there really is never any need to use the latter ('n' only) form. You get the same info, more clearly, and more by using the 'gn' form.