I'm trying to get the redirect link from a site by using curl -I then grep to "location" and then sed out the location text so that I am left with the URL.
But this doesn't work. It outputs the URL to screen and doesn't put it
test=$(curl -I "http://www.redirectURL.com/" 2> /dev/null | grep "location" | sed -E 's/location:[ ]+//g')
echo "1..$test..2"
Which then outputs:
..2http://www.newURLfromRedirect.com/bla
What's going on?
As #user353852 points out, you have a carriage return character in you output from curl that is only apparent when you try to echo any character after it. The less pager shows this up as ^M
You can use sed to remove "control characters", like in this example:
% test=$(curl -I "http://www.redirectURL.com/" 2>|/dev/null | awk '/^Location:/ { print $2 }' | sed -e 's/[[:cntrl:]]//') && echo "1..${test}..2"
1..http://www.redirecturl.com..2
Notes:
I used awk rather than your grep [...] | sed approach, saving one process.
For me, curl returns the location in a line starting with 'Location:' (with a capital 'L'), if your version is really reporting it with a lowercase 'l', then you may need to change the regular expression accordingly.
the "Location" http header starts with a capital L, try replacing that in your command.
UPDATE
OK, I have run both lines separately and each runs fine, except that it looks like the output from the curl command includes some control chars which is being captured in the variable. When this is later printed in the echo command, the $test variable is printed followed by carriage return to set the cursor to the start of the line and then ..2 is printed over the top of 1..
Check out the $test variable in less:
echo 1..$test..2 | less
less shows:
1..http://www.redirectURL.com/^M..2
where ^M is the carriage return character.
Related
Fist I am trying to print a file with the word 'Guess' in it and change the word fall to bar.
This what I have tried:
sed -n -e '/Guess/p' -e 's/Fall/bar/' data.txt
The commands work fine alone however, together only the first part is working.
To print line containing 'Guest' and change word 'Fall' in that line,
I would try experimenting with this command>
cat data.txt | sed -n '/Guest/{ s/Fall/bar/p }'
However, this print nothing, if the line with 'Guest' does not contain the word 'Fall'. (Both scenarios - Guest + Fall are required)
If you want to print line containing 'Guest' no matter if substitution finds a word 'Fall', I suggest trying:
cat data.txt | sed -n '/Guest/ { s/Fall/bar/;p }'
I was trying to do these few operations/commands on a single line and assign it to a variable. I have it working about 90% of the way except for one part of it.
I was unaware you could do this, but I read that you can nest $(..) inside other $(..).... So I was trying to do that to get this working, but can't seem to get it the rest of the way.
So basically, what I want to do is:
1. Take the output of a file and assign it to a variable
2. Then pre-pend some text to the start of that output
3. Then append some text to the end of the output
4. And finally remove newlines and replace them with "\n" character...
I can do this just fine in multiple steps but I would like to try and get this working this way.
So far I have tried the following:
My 1st attempt, before reading about nested $(..):
MY_VAR=$(echo -n "<pre style=\"display:inline;\">"; cat input.txt | sed ':a;N;$!ba;s/\n/\\n/g'; echo -n "</pre>")
This one worked 99% of the way except there was a newline being added between the cat command's output and the last echo command. I'm guessing this is from the cat command since sed removed all newlines except for that one, maybe...?
Other tries:
MY_VAR=$( $(echo -n "<pre style=\"display:inline;\">"; cat input.txt; echo -n "</pre>") | sed ':a;N;$!ba;s/\n/\\n/g')
MY_VAR="$( echo $(echo -n "<pre style=\"display:inline;\">"; cat input.txt; echo "</pre>") | sed ':a;N;$!ba;s/\n/\\n/g' )"
MY_VAR="$( echo "$(echo -n "<pre style=\"display:inline;\">"; cat input.txt; echo "</pre>")" | sed ':a;N;$!ba;s/\n/\\n/g' )"
*Most these others were tried with and without the extra double-quotes surrounding the different $(..) parts...
I had a few other attempts, but they didn't have any luck either... On a few of the other attempts above, it seemed to work except sed was NOT inserting the replacement part of it. The output was correct for the most part, except instead of seeing "\n" between lines it just showed each of the lines smashed together into one line without anything to separate them...
I'm thinking there is something small I am missing here if anyone has any idea..?
*P.S. Does Bash have a name for the $(..) structure? It's hard trying to Google for that since it doesn't really search symbols...
You have no need to nest command substitutions here.
your_var='<pre style="display:inline;">'"$(<input.txt)"'</pre>'
your_var=${your_var//$'\n'/'\n'}
"$(<input.txt)" expands to the contents of input.txt, but without any trailing newline. (Command substitution always strips trailing newlines; printf '%s' "$(cat ...)" has the same effect, albeit less efficiently as it requires a subshell, whereas cat ... alone does not).
${foo//bar/baz} expands to the contents of the shell variable named foo, with all instances of bar replaced with baz.
$'\n' is bash syntax for a literal newline.
'\n' is bash syntax for a two-character string, beginning with a backslash.
Thus, tying all this together, it first generates a single string with the prefix, the contents of the file, and the suffix; then replaces literal newlines inside that combined string with '\n' two-character sequences.
Granted, this is multiple lines as implemented above -- but it's also much faster and more efficient than anything involving a command substitution.
However, if you really want a single, nested command substitution, you can do that:
your_var=$(printf '%s' '<pre style="display:inline;">' \
"$(sed '$ ! s/$/\\n/g' <input.txt | tr -d '\n')" \
'</pre>')
The printf %s combines its arguments without any delimiter between them
The sed operation adds a literal \n to the end of each line except the last
The tr -d '\n' operation removes literal newlines from the file
However, even this approach could be done more efficiently without the nesting:
printf -v your_var '%s' '<pre style="display:inline;">' \
"$(sed '$ ! s/$/\\n/g' <input.txt | tr -d '\n')" \
'</pre>')
...which has the printf assign its results directly to your_var, without any outer command substitution required (and thus saving the expense of the outer subshell).
I have a file like
key\0value\n
akey\0value\n
key2\0value\n
I have to create a script that take as argument a word. I have to return every lines having a key exactly the same than the argument.
I tried
grep -aF "$key\x0"
but grep seems to do not understand the \x0 (\0 same result). Futhermore, I have to check that the line begins with "$key\0"
I only can use sed grep and tr and other no maching commands
To have the \0 taken into account try :
grep -Pa "^key\x0"
it works for me.
Using sed
sed will work:
$ sed -n '/^key1\x00/p' file
key1value
The use of \x00 to represent a hex character is a GNU extension to sed. Since this question is tagged linux, that is not a problem.
Since the null character does not display well, one might (or might not) want to improve the display with something like this:
$ sed -n 's/^\(akey\)\x00/\1-->/p' file
akey-->value
Using sed with keys that contain special characters
If the key itself can contain sed or shell active characters, then we must escape them first and then run sed against the input file:
#!/bin/bash
printf -v script '/^%s\\x00/p' "$(sed 's:[]\[^$.*/]:\\&:g' <<<"$1")"
sed -n "$script" file
To use this script, simply supply the key as the first argument on the command line, enclosed in single-quotes, of course, to prevent shell processing.
To see how it works, let's look at the pieces in turn:
sed 's:[]\[^$.*/]:\\&:g' <<<"$1"
This puts a backslash escape in front of all sed-active characters.
printf -v script '/^%s\\x00/p' "$(sed 's:[]\[^$.*/]:\\&:g' <<<"$1")"
This creates a sed command using the escaped key and stores it in the shell variable script.
sed -n "$script" file
This runs sed using the shell variable script as the sed command.
Using awk
The question states that awk is not an acceptable tool. For completeness, though, here is an awk solution:
$ awk -F'\x00' -v k=key1 '$1 == k' file
key1value
Explanation:
-F'\x00'
awk divides the input up into records (lines) and divides the records up into fields. Here, we set the field separator to the null character. Consequently, the first field, denoted $1, is the key.
-v k=key1
This creates an awk variable, called k, and sets it to the key that we are looking for.
$1 == k
This statement looks for records (lines) for which the first field matches our specified key. If a match is found, the line is printed.
I'm using ssh to connect to a remote machine and read a log file there. From that log file, based on some tokens, I extract specific logs and store it in a variable. Every log is in new line in the log file and the data can contain any character including white space.
array=("$(egrep "UserComments/propagateBundle-2013-10-19--04:42:13|UserComments/propagateBundle-2013-10-19--04:38:36|UserComments/propagateBundle-2013-10-19--04:34:24" <path>/propagateBundle.log)")
echo ${array[0]}
echo "$array"
First echo prints complete output in one line separated by white space while the other prints outputs in new line. Problem, is, I'm not able to save this output as an array. I tried this:
newArray=("$array")
max=${#newArray[#]}
echo $max
But echoing 'max' yields '1' on the screen. How can I save the output in an array? I also tried using
IFS=\`\n`
but could not get the data in an array.
EDIT
I used the solution given by Anubhav and it worked like charm. Now I faced a second issue. Since my data contains white spaces, so the array broke at white spaces and wrongly contained the one comments as multiple arrays. So, I used
IFS=\`\n`
and also used a $ symbol before backticks. Although this solves my problem, I still get an exception in the logs:
test.sh: line 11: n: command not found
Any suggestions?
Don't put quotes in the command substitution:
array=( $(egrep "UserComments/propagateBundle-2013-10-19--04:42:13|UserComments/propagateBundle-2013-10-19--04:38:36|UserComments/propagateBundle-2013-10-19--04:34:24" <path>/propagateBundle.log) )
With quotes as in your code whole output is treated as single string in the array.
I've used IFS=('\n') otherwise all "n" chars disappears from results and sort command doesn't work properly. See bellow, it is a customized llq output.
#!/bin/bash
IFS=('\n')
raw=(`llq -f %id %o %gu %gl %st %BS %c`)
echo
echo ${raw[*]} | grep "step(s)"
echo
echo ${raw[*]} | grep "Step"
echo ${raw[*]} | grep "\---*"
echo ${raw[*]} | grep "bgp-fn*" | sort -k5 -r
echo ${raw[*]} | grep "\---*"
echo ${raw[*]} | grep "Step"
echo
echo ${raw[*]} | grep "step(s)"
echo
If I run these commands from a script:
#my.sh
PWD=bla
sed 's/xxx/'$PWD'/'
...
$ ./my.sh
xxx
bla
it is fine.
But, if I run:
#my.sh
sed 's/xxx/'$PWD'/'
...
$ ./my.sh
$ sed: -e expression #1, char 8: Unknown option to `s'
I read in tutorials that to substitute environment variables from shell you need to stop, and 'out quote' the $varname part so that it is not substituted directly, which is what I did, and which works only if the variable is defined immediately before.
How can I get sed to recognize a $var as an environment variable as it is defined in the shell?
Your two examples look identical, which makes problems hard to diagnose. Potential problems:
You may need double quotes, as in sed 's/xxx/'"$PWD"'/'
$PWD may contain a slash, in which case you need to find a character not contained in $PWD to use as a delimiter.
To nail both issues at once, perhaps
sed 's#xxx#'"$PWD"'#'
In addition to Norman Ramsey's answer, I'd like to add that you can double-quote the entire string (which may make the statement more readable and less error prone).
So if you want to search for 'foo' and replace it with the content of $BAR, you can enclose the sed command in double-quotes.
sed 's/foo/$BAR/g'
sed "s/foo/$BAR/g"
In the first, $BAR will not expand correctly while in the second $BAR will expand correctly.
Another easy alternative:
Since $PWD will usually contain a slash /, use | instead of / for the sed statement:
sed -e "s|xxx|$PWD|"
You can use other characters besides "/" in substitution:
sed "s#$1#$2#g" -i FILE
一. bad way: change delimiter
sed 's/xxx/'"$PWD"'/'
sed 's:xxx:'"$PWD"':'
sed 's#xxx#'"$PWD"'#'
maybe those not the final answer,
you can not known what character will occur in $PWD, / : OR #.
if delimiter char in $PWD, they will break the expression
the good way is replace(escape) the special character in $PWD.
二. good way: escape delimiter
for example:
try to replace URL as $url (has : / in content)
x.com:80/aa/bb/aa.js
in string $tmp
URL
A. use / as delimiter
escape / as \/ in var (before use in sed expression)
## step 1: try escape
echo ${url//\//\\/}
x.com:80\/aa\/bb\/aa.js #escape fine
echo ${url//\//\/}
x.com:80/aa/bb/aa.js #escape not success
echo "${url//\//\/}"
x.com:80\/aa\/bb\/aa.js #escape fine, notice `"`
## step 2: do sed
echo $tmp | sed "s/URL/${url//\//\\/}/"
URL
echo $tmp | sed "s/URL/${url//\//\/}/"
URL
OR
B. use : as delimiter (more readable than /)
escape : as \: in var (before use in sed expression)
## step 1: try escape
echo ${url//:/\:}
x.com:80/aa/bb/aa.js #escape not success
echo "${url//:/\:}"
x.com\:80/aa/bb/aa.js #escape fine, notice `"`
## step 2: do sed
echo $tmp | sed "s:URL:${url//:/\:}:g"
x.com:80/aa/bb/aa.js
With your question edit, I see your problem. Let's say the current directory is /home/yourname ... in this case, your command below:
sed 's/xxx/'$PWD'/'
will be expanded to
sed `s/xxx//home/yourname//
which is not valid. You need to put a \ character in front of each / in your $PWD if you want to do this.
Actually, the simplest thing (in GNU sed, at least) is to use a different separator for the sed substitution (s) command. So, instead of s/pattern/'$mypath'/ being expanded to s/pattern//my/path/, which will of course confuse the s command, use s!pattern!'$mypath'!, which will be expanded to s!pattern!/my/path!. I’ve used the bang (!) character (or use anything you like) which avoids the usual, but-by-no-means-your-only-choice forward slash as the separator.
Dealing with VARIABLES within sed
[root#gislab00207 ldom]# echo domainname: None > /tmp/1.txt
[root#gislab00207 ldom]# cat /tmp/1.txt
domainname: None
[root#gislab00207 ldom]# echo ${DOMAIN_NAME}
dcsw-79-98vm.us.oracle.com
[root#gislab00207 ldom]# cat /tmp/1.txt | sed -e 's/domainname: None/domainname: ${DOMAIN_NAME}/g'
--- Below is the result -- very funny.
domainname: ${DOMAIN_NAME}
--- You need to single quote your variable like this ...
[root#gislab00207 ldom]# cat /tmp/1.txt | sed -e 's/domainname: None/domainname: '${DOMAIN_NAME}'/g'
--- The right result is below
domainname: dcsw-79-98vm.us.oracle.com
VAR=8675309
echo "abcde:jhdfj$jhbsfiy/.hghi$jh:12345:dgve::" |\
sed 's/:[0-9]*:/:'$VAR':/1'
where VAR contains what you want to replace the field with
I had similar problem, I had a list and I have to build a SQL script based on template (that contained #INPUT# as element to replace):
for i in LIST
do
awk "sub(/\#INPUT\#/,\"${i}\");" template.sql >> output
done
If your replacement string may contain other sed control characters, then a two-step substitution (first escaping the replacement string) may be what you want:
PWD='/a\1&b$_' # these are problematic for sed
PWD_ESC=$(printf '%s\n' "$PWD" | sed -e 's/[\/&]/\\&/g')
echo 'xxx' | sed "s/xxx/$PWD_ESC/" # now this works as expected
for me to replace some text against the value of an environment variable in a file with sed works only with quota as the following:
sed -i 's/original_value/'"$MY_ENVIRNONMENT_VARIABLE"'/g' myfile.txt
BUT when the value of MY_ENVIRONMENT_VARIABLE contains a URL (ie https://andreas.gr) then the above was not working.
THEN use different delimiter:
sed -i "s|original_value|$MY_ENVIRNONMENT_VARIABLE|g" myfile.txt