Can anyone tell me how to send receive data between two applications over an ActiveSync connection?
In my scenario there will be one application running on a desktop and another on a windows mobile device, both these applications need to communicate among them. The connection between the desktop and the mobile device can be ActiveSync over USB or Bluetooth. I need the applications to exchange a continuous stream of data, more like a chat application. Ideally, the mobile device application will be sending out data 10-15 times a second (maybe more) and the desktop application will receive the data and display it.
For e.g., let’s consider the ‘Notes’ application for mobile device. Basically it allows user to save small textual notes. Now my application would be something similar, with the exception that it will send out all input it receives to the desktop application. The desktop app will receive the ‘inputs’ and process it.
Finally, I'm open to using any other option then ActiveSync, provided it supports Bluetooth.
You should check out ActiveSync api documentation for informations.
There is also an alternative solution, which I use.
Windows Mobile activates a temporary LAN when the device is connected on the USB.
You can use Window Sockets for the communication and avoid ActiveSync,
if it's not too much trouble for you.
Usually, the device gets IP 169.254.2.1 and the PC the 169.254.2.2.
Related
I am doing some research on the WebUSB API for our company because we are going to start to manufacture devices in house.
Our current device manufacture comes with an application so the team can plug the device into a computer and diagnose it. Their application allows us to read outputs from the device, as well as pushing commands/configuration to the device over a wired connection.
Since this device is 100% ours, we are also responsible for building out the diagnostic tooling. We need some sort of interface that allows a user to read outputs and send commands/configuration to the device over a wired USB connection.
Is the webUSB the correct API? If not, what are some suggestions for accomplishing the requirement? Are we limited to building some sort of desktop or mobile application?
I would recommend resources below to read to help you understand if the WebUSB API fits your needs or not:
https://web.dev/devices-introduction/ helps you pick the appropriate API to communicate with a hardware device of your choice.
https://web.dev/build-for-webusb/ explains how to build a device to take full advantage of the WebUSB API.
From what you describe, WebUSB isn't strictly required but won't hurt either.
First and foremost, you will need to implement the USB interfaces reading data and sending configurations. It will be a custom protocol, and not one of the standard USB device classes such as HID, video or mass storage. The details of the protocol and if you use control, interrupt or bulk transfers is your choice.
I'm assuming you will connect the devices to Windows PCs, and you likely don't want to put money into writing device drivers. If so, the easiest approach is to add the required descriptors and control requests required for Microsoft OS 2.0 Descriptors. That way, the WinUSB driver will be installed automatically when the device is plugged in.
Using the WinUSB API, a Windows application will then be able to communicate with the USB device. No additional drivers are needed. (On macOS and Linux it's even easier as you don't need the Microsoft OS 2.0 Descriptors in the first place.)
On top of that you can implement the additional descriptors and control requests for WebUSB. It will provide the additional benefit that you can write a web application (instead of a native application) for communicating with the USB device. (Currently, you are restricted to the Chrome browser.) WebUSB devices should implement the WinUSB descriptors as the alternative (.INF files, manual installation process) is a pain.
The already mentioned web page https://web.dev/build-for-webusb/ is a complete example of how to implement it.
I'm trying to establish a connection between my PC running Ubuntu and my iPhone via Bluetooth automatically when it becomes available, after being manually paired beforehand. I've seen this to be possible with certain peripherals, mainly audio. For example, my phone will automatically connect to a Bluetooth speaker when it is turned on and Bluetooth is active on my phone; another example is my phone automatically connects to my car's radio system via Bluetooth when I turn the car on.
I'm not able to connect my phone to my PC without first initiating the connection from the smartphone's Bluetooth menu. I'm thinking that I could possibly write an application for the PC to attempt to connect to the device every few minutes or something, but it seems that the phone needs to be the device to initiate the connection.
The only information that I need for what I'm trying to do ultimately is that the devices can pair successfully. Essentially I'm trying to build a sort of proximity trigger between my phone and my PC without using Wi-Fi and GPS - I can't use these for some specific reasons.
Is there any way to make this happen?
Yes this should be doable as long as you use the Background Processing feature for iOS apps. In the example I'll give below, we'll have the PC be the peripheral and the phone be the central, but you can really have it working either way. You will need to do the following:-
First initial connection needs to be performed in the foreground (this is due to iOS's background limitations).
On the iOS side, you need an application that acts as a central that scans and connects to the remove device (check this example as a starting point).
Upon connection, you need to bond with the PC. Bonding is important as it will prevent you from having to do the pairing again in the future. However, pairing/bonding is managed by the iPhone's OS so you cannot write it in your application, so the workaround is to have an encrypted characteristic on the PC side that will force the iPhone to bond (this is covered later).
On the PC side, you need to have a BlueZ script that acts as a peripheral that is always advertising. You can do this using bluetoothctl (check the examples here and here).
Before you start advertising, you need to have a GATT server on the PC side (to do this, check this example).
When registering characteristics, ensure that one of them has the encrypt-read property (you can find a full list of the properties here).
Now when you attempt to read this characteristic from the iOS side, the two devices should bond (make sure that your PC is bondable which you can do this via these commands).
Once the devices are paired, your iOS app needs to be working in the background constantly scanning and attempting to connect to the same peripheral (have a look at this and this example).
You can find more useful information at the links below:-
Getting started with Bluetooth Low Energy
The Ultimate Guide to CoreBluetooth Development
How to manage Bluetooth devices on Linux using bluetoothctl
For example, if I have a friend over and he wants to show me a video using a given app that runs both on my device and his device. Could that app display a QR code on the screen or something that he could scan and instantly be granted access to my Chromecast device?
As Ali mentioned, Chromecast devices are discovered and apps launched via local network applications. One an app is started, it could easily connect with a cloud service that allows other (non-local) devices to talk w/ your Chromecast via the cloud service. A Chromecast Receiver application is just a HTML5 application (HTML, CSS, and JavaScript). You can really do what ever you want once your application gets launched.
If displaying a QR code that allows some kind of rendezvous with your cloud application is what you want to do, you can certainly do that.
I presume your friend's mobile device is on the same wifi network, right? Currently, a chromecast device has no identity outside of its local wifi network, so if the sender is not on the same network as the receiver, there is no way they can exchange messages. Back to your question, if your friend is on your network, then he could see your device except from those applications for which your device is not whitelisted for. Is that the case you want to handle through, say, a QR code? If so, that is currently not doable either since whitelisting is not just a local setup. Maybe I misunderstood your question?
Based on your questions, you are saying that both you and your friend have the same app. If so, and if your friend connects to your wifi network, then he will see your chromecast (you do not whitelist a device for a phone, you whitelist a device for an app id and as long as your friend has the same app (hence the same app id I resume), your whitelisted device will be discoverable by his phone. On the other hand, if you do not want to give him credentials to get on your network, then you need a cloud backend and a lot of work, since although your chromecast device can send a message to cloud and your cloud service can notify the other user's phone (using, say notification or some other mechanism that you employ in your app), the reverse (i.e. sending a message from your friend's phone to your chromecast (through your cloud service)) is much harder. Your friend's phone can send your phone a message (again via a back end service, a bluetooth communication, NFC, etc and then your phone using your app can send that to the chromecast receiver but I am sure you are getting the idea that it is a lot of work. Signing up on your wifi network can be made easier with a QR code or something so at this pint, that would be the easiest solution.
The Chromecast device is a "receiver device [that] runs a scaled-down Chrome browser with a receiver application". Can I download and install this receiver app on a chrome browser for example on my Windows notebook?
I have implemented a complete chromecast v2 receiver, called YouMap ChromeCast Receiver, available in Google play store and Amazon store, xda-developer thread here: http://forum.xda-developers.com/android-tv/chromecast/app-youmap-chromecast-receiver-android-t3161851
The current Chromecast protocol is a completely different one from the original DIAL based protocol. Right now, only YouTube still uses the old protocol, which chromecast maintains its backward compatibility.
The discovery is mDNS, exactly same as Apple TV bonjour protocol.
The most difficult part is device authentication, the sender and the receiver perform handshakes by exchanging keys and certificates in a way extremely difficult to crack. AppleTV does the same using FairPlay encryption.
The next difficult part is the mirroring protocol, which is also very complicated, need to deal with packet splits, packet retransmissions. Overall, chromecast mirroring protocol is well designed, better than miracast, better than AirPlay mirroring (I have also implemented both of them, so I know what I am talking about).
When I get chances, will write more here.
The chromecast device works using the DIAL protocol. It is completely possible to emulate this protocol using some simple code to listen on the multicast group for discovery and then handle the HTTP requests to launch applications. It is then the launched application that communicates with the casting device, I believe using the RAMP protocol.
Luckily for us the applications that the chromecast device uses are mostly web applications meaning our device emulator just needs to launch a web browser and point it to a specific url when it receives an application request.
For example the youtube app, after device discovery and establishing where the applications are located (part of DIAL). Will send a HTTP POST request containing a pairing key to /<apps url>/YouTube. All the emulating device needs to do now is open https://www.youtube.com/tv?<pairing key> in a browser window. From here, I believe, communication for controlling the youtube app is not sent through the casting device but through the open tabs on the casting device and the emulator.
This is my understanding of how the chromecast device works and specifically the youtube app from looking at https://github.com/dz0ny/leapcast which is a python emulator that has youtube and google music working.
Google is in progress of open sourcing some part of the chrome cast.
https://code.google.com/p/chromium/codesearch#chromium/src/chromecast/
https://code.google.com/p/chromium/issues/list?q=label:Chromecast
So theoretically you can build a similar device.
I am writing a windows application (written entirely in C++) which reads files from a storage card on a mobile phone running Windows Mobile. The tough part is, I don't know how to make my application detect the event that a user has connected the mobile phone to the USB of laptop. I did some reading on MSDN and have written a small code using RegisterDeviceNotification, which detects whenever a USB disk is attached/removed from the laptop. However, I am unable to tweak this to make it work for phone type devices. Please help me out through any links/tutroials which explains this(preferrably C++, as I don't know .NET or C#).
Thanks
Alok
According to this article you can use RegisterDeviceNotification to get notifications when activesync detects a device has been plugged/unplugged. (See option 3 at the end of the article)
It may just be a matter of setting up the correct notification filter.
Windows Mobile devices use RNDIS, a network interface protocol behind the scenes. Hence, the RegisterDeviceNotification method still works, but you're looking for a DEV_BROADCAST_DEVICEINTERFACE, not DEV_BROADCAST_VOLUME. (i.e. dbch_devicetype==DBT_DEVTYP_DEVICEINTERFACE)
You can use RAPI or RAPI2 to detect when a Windows Mobile device connects to a PC via Active Sync or Windows Mobile Device Center. RAPI can also be used to read the files on the storage card and much more.
RAPI is simpler to program because it is a C based API. RAPI2 has more functionality than RAPI, but is an object oriented COM API. If your needs are simple and you only care about one device/connection at a time then RAPI is good enough. There are two RAPI functions used to detect connections: CeRapiInit (blocking), and CeRapiInitEx (signals an event upon connection).