I need to create a (large) set of spatial polygons for test purposes. Is there an algorithm that will create a randomly shaped polygon staying within a bounding envelope? I'm using OGC Simple stuff so a routine to create the well known text is the most useful, Language of choice is C# but it's not that important.
Here you can find two examples of how to generate random convex polygons. They both are in Java, but should be easy to rewrite them to C#:
Generate Polygon example from Sun
from JTS mailing list, post Minimum Area bounding box by Michael Bedward
Another possible approach based on generating set of random points and employ Delaunay tessellation.
Generally, problem of generating proper random polygons is not trivial.
Do they really need to be random, or would some real WKT do? Because if it will, just go to http://koordinates.com/ and download a few layers.
What shape is your bounding envelope ? If it's a rectangle, then generate your random polygon as a list of points within [0,1]x[0,1] and scale to the size of your rectangle.
If the envelope is not a rectangle things get a little more tricky. In this case you might get best performance simply by generating points inside the unit square and rejecting any which lie in the part of the unit square which does not scale to the bounding envelope of your choice.
HTH
Mark
Supplement
If you wanted only convex polygons you'd use one of the convex hull algorithms. Since you don't seem to want only convex polygons your suggestion of a circular sweep would work.
But you might find it simpler to sweep along a line parallel to either the x- or y-axis. Assume the x-axis.
Sort the points into x-order.
Select the leftmost (ie first) point. At the y-coordinate of this point draw an imaginary horizontal line across the unit square. Prepare to create a list of points along the boundary of the polygon above the imaginary line, and another list along the boundary below it.
Select the next point. Add it to the upper or lower boundary list as determined by it's y-coordinate.
Continue until you're out of points.
This will generate convex and non-convex polygons, but the non-convexity will be of a fairly limited form. No inlets or twists and turns.
Another Thought
To avoid edge crossings and to avoid a circular sweep after generating your random points inside the unit square you could:
Generate random points inside the unit circle in polar coordinates, ie (r, theta).
Sort the points in theta order.
Transform to cartesian coordinates.
Scale the unit circle to a bounding ellipse of your choice.
Off the top of my head, that seems to work OK
Related
I don't know much about geometric algorithms, but I just wanted to know if given a mesh, is there an algorithm that outputs a boolean which is true when the mesh is actually a hollow cylinder (like a straight pipe) or else, it will be false. Any reference to the algorithm if it exists would be helpful.
EDIT: I am relatively sure that the body has a surface mesh, basically the only the surfaces of the object is meshed and it uses triangles for meshing.
A key problem is to find the axis of the cylindre. If it is known, you are done. If it is unknown but the cylindre is known to be without holes and delimited by two perpendicular bases, the main axis of inertia can be used. Otherwise, it should be constructible from the coordinates of five points (A Cylinder of Revolution on Five Points http://www.cim.mcgill.ca/~paul/12ICGG6Aw.pdf).
When you know the axis, it suffices to check that the distance of every point to the axis is constant. In case the mesh describes a solid (i.e. a surface with thickness), make sure to pick the points on the outer surface, for example using the orientation of the normals. There will be two distances and the lateral faces must be ignored.
I have two objects: A sphere and an object. Its an object that I created using surface reconstruction - so we do not know the equation of the object. I want to know the intersecting points on the sphere when the object and the sphere intersect. If we had a sphere and a cylinder, we could solve for the equation and figure out the area and all that but the problem here is that the object is not uniform.
Is there a way to find out the intersecting points or area on the sphere?
I'd start by finding the intersection of triangles with the sphere. First find the intersection of each triangle's plane and the sphere, which gives a circle. Then find the circle's intersection/s with the triangle edges in 2D using line/circle tests. The result will be many arcs which I guess you could approximate with lines. I'm not really sure where to go from here without knowing the end goal.
If it's surface area you're after, maybe a numerical approach would be better. I'd cover the sphere in points and count the number inside the non-uniform object. To find if a point is inside, maybe trace outwards and count the intersections with the surface (if it's odd, the point is inside). You could use the stencil buffer for this if you wanted (similar to stencil shadows).
If you want the volume of intersection a quick google search gives "carve", a mesh based CSG library.
Starting with triangles versus the sphere will give you the points of intersection.
You can take the arcs of intersection with each surface and combine them to make fences around the sphere. Ideally your reconstructed object will be in winged-edge format so you could just step from one fence segment to the next, but with reconstructed surfaces I guess you might need to apply some slightly fuzzy logic.
You can determine which side of each fence is inside the reconstructed object and which side is out by factoring in the surface normals along the fence.
You can then cut the sphere along the fences and add the internal bits to the display.
For the other side of things you could remove any triangle completely inside the sphere and cut those that intersect.
I have given the coordinates of 1000 triangles on a plane (triangle number (T0001-T1000) and its coordinates (x1,y1) (x2,y2),(x3,y3)). Now, for a given point P(x,y), I need to find a triangle which contains the point P.
One option might be to check all the triangles and find the triangle that contain P. But, I am looking for efficient solution for this problem.
You are going to have to check every triangle at some point during the execution of your program. That's obvious right? If you want to maximize the efficiency of this calculation then you are going to create some kind of cache data structure. The details of the data structure depend on your application. For example: How often do the triangles change? How often do you need to calculate where a point is?
One way to make the cache would be this: Divide your plane in to a finite grid of boxes. For each box in the grid, store a list of the triangles that might intersect with the box.
Then when you need to find out which triangles your point is inside of, you would first figure out which box it is in (this would be O(1) time because you just look at the coordinates) and then look at the triangles in the triangle list for that box.
Several different ways you could search through your triangles. I would start by eliminating impossibilities.
Find a lowest left corner for each triangle and eliminate any that lie above and/or to the right of your point. continue search with the other triangles and you should eliminate the vast majority of the original triangles.
Take what you have left and use the polar coordinate system to gather the rest of the needed information based on angles between the corners and the point (java does have some tools for this, I do not know about other languages).
Some things to look at would be convex hull (different but somewhat helpful), Bernoullies triangles, and some methods for sorting would probably be helpful.
Greetings,
We have a set of points which represent an intersection of a 3d body and a horizontal plane. We would like to detect the 2D shapes that represent the cross sections of the body. There can be one or more such shapes. We found articles that discuss how to operate on images using Hough Transform, but we may have thousands of such points, so converting to an image is very wasteful. Is there a simpler way to do this?
Thank you
In converting your 3D model to a set of points, you have thrown away the information required to find the intersection shapes. Walk the edge-face connectivity graph of your 3D model to find the edge-plane intersection points in order.
Assuming you have, or can construct, the 3d model topography (some number of vertices, edges between vertices, faces bound by edges):
Iterate through the edge list until you find one that intersects the test plane, add it to a list
Pick one of the faces that share this edge
Iterate through the other edges of that face to find the next intersection, add it to the list
Repeat for the other face that shares that edge until you arrive back at the starting edge
You've built an ordered list of edges that intersect the plane - it's trivial to linearly interpolate each edge to find the intersection points, in order, that form the intersection shape. Note that this process assumes that the face polygons are convex, which in your case they are.
If your volume is concave you'll have multiple discrete intersection shapes, and so you need to repeat this process until all edges have been examined.
There's some java code that does this here
The algorithm / code from the accepted answer does not work for complex special cases, when the plane intersects some vertices of a concave surface. In this case "walking" the edge-face connectivity graph greedily could close some of the polygons before time.
What happens is, that because the plane intersects a vertex, at one point when walking the graph there are two possibilities for the next edge, and it does matter which one is chosen.
A possible solution is to implement a graph traversal algorithm (for instance depth-first search), and choose the longest loop which contains the starting edge.
It looks like you wanted to combine intersection points back into connected figures using some detection or Hough Transform.
Much simpler and more robust way is to immediately get not just intersection points, but contours of 3D body, where the plane cuts it.
To construct contours on the body given by triangular mesh, define the value in each mesh vertex equal to signed distance from the plane (positive on one side of the plane and negative on the other side). The marching squares algorithm for isovalue=0 can be then applied to extract the segments of the contours:
This algorithm works well even when the plane passes through a vertex or an edge of the mesh.
To better understand what is the result of plane section, please take a look at this short video. Following the links there, one can find the implementation as well.
What is a good algorithm for reducing the number of vertices in a polygon without changing the way it looks very much?
Input: A polygon, represented as a list of points, with way too many verticies: raw input from the mouse, for example.
Output: A polygon with much fewer verticies that still looks a lot like the original: something usable for collision detection, for example (not necessarily convex).
Edit: The solution to this would be similar to finding a multi-segmented line of best fit on a graph. It's called Segmented Least Squares in my algorithms book.
Edit2: The Douglas Peucker Algorithm is what I really want.
Edit: Oh look, Simplifying Polygons
You mentioned collision detection. You could go really simple and calculate a bounding convex hull around it.
If you cared about the concave areas, you can calculate a concave hull by taking the centroid of your polygon, and choosing a point to start. From the starting point rotate around the centroid, finding each vertex you want to keep, and assigning that as the next vertex in the bounding hull. The complexity of the algorithm would come in how you determined which vertices to keep, but I'm sure you thought of that already. You can throw all your vertices into buckets based on their location relative to the centroid. When a bucket gets more than an arbitrary number of vertices full, you can split it. Then take the mean of the vertices in that bucket as the vertex to use in your bounding hull. Or, forget the buckets, and when you're moving around the centroid, only choose a point if its more than a given distance from the last point.
Actually, you could probably just use all the vertices in your polygon as "cloud of points" and calculate the concave hull around that. I'll look for an algorithm link. Worst case on this would be a completely convex polygon.
Another alternative is to start with a bounding rectangle. For each vertex on the rectangle, find the distance from the point to the polygon. For the farthest vertex, split it into two more vertices and move them in some. Repeat until some proportion of either vertices or area is met. I'd have to think about the details of this one a little more.
If you care about the polygon actually looking similar, even in the case of a self-intersecting polygon, then another approach would be required, but it doesn't sound like thats necessary since you asked about collision detection.
This post has some details about the convex hull part.
There's a lot of material out there. Just google for things like "mesh reduction", "mesh simplification", "mesh optimization", etc.