Any one has any idea how to map an infopath field to a sharepoint column of type choice? The infopath field is a repeating field, so the user can select multiple options, I want to be able to map those to the choice field in sharepoint. Any ideas?
update:
What I'm trying to do is the following. I have a choice column in sharepoint which allows user entered values. In infopath, I have a repeating field. I'm binding the field to a dropdownlist. The dropdownlist gets filled by a webservice. This dropdownlist is in a repeating section, so the user can choose to select from multiple dropdownlists. So lets say the user adds 2 dropdownlists, and selects an option from each dropdownlist. I want to be able to add those selections as choices in the sharepoint choice column.
SharePoint list is a flat structure, and because of that Infopath does not allow you map repeating sections to list columns.
You might wanna consider the following workaround:
Store Infopath form to one library
(along with non-repeating fields)
Use one of these custom activities to extract data from
repeating table and copy it to
another list
Create a custom data view or a web part to display these items (if
necessary)
This approach can be useful if you need to do some additional tasks with the repeating data.
When you are promoting fields within a repeated section into SharePoint columns, the options available are to promote the column as:
first (i.e. only the first selection is promoted)
last
count
merge (I believe this merges all the selected values together into a single entry)
screenshot http://img4.imageshack.us/img4/5539/repeatinggrouptr3.png
Is it not similar to Create a Repeating Cascading List from:
a Flat Data Source or
a Hierarchical Data Source ?
If it is, may be those two articles may give you some pointers.
Depends on the type of choice field it is.
If it is a Multiple Select (checkboxes) Choice field, you can set the field through the object model (from the sharepoint site) or through the web service, by using ";#" for each item that you want to check mark, where is the value which is listed by the checkbox. I don't remember what the option is for single choice only, but it is something of the same nature. If you are talking about lookup fields, it has to do with the index number of the field from the list you are looking it up from. Also, there is additional steps if the choice field allows users to input or specify their own options.
Related
Novice in Sharepoint and looking for some advise.
we are trying to setup a infopath form with the below fields.
ReqID (Autogenerated with a workflow based on ID like Req-1 etc.),
Description,
User,
Date,
Testing,
Tester,
Date
when the user submits the form, we would like to save the information to two separate lists on sharepoint like...
List A - ReqID, Description, User, Date
List B - ReqID, Description, Testing, Tester, Date
Can someone please advise if this is doable without using any coding.
Thank you so much for all the help.
Several possible solutions:
One list:
If it is a matter of hiding clutter from selected users then: create one list for all of the fields and then create two views, one with your first set of columns and the other with the second set of columns. This has the advantage of no duplication of data, and if you need to update the Description column, it only has to be done in one place.
Two lists:
From the InfoPath form, post all of the fields to the first list and create a View that only displays what's needed for the "A" users. Create a workflow that adds a new item to list "B" with only the data needed.
Three lists:
From the InfoPath form, post all of the fields to a master list. Create a workflow that copies selected fields to List A and to List B. This has the advantage of the master list being an unchanged source of the original data for audit or tracking purposes.
Using Web Services
I believe InfoPath can call web services. This will be more like "coding", but you can write data directly to SharePoint lists using SharePoint's REST API.
I am trying to create a categorized view of all Notes documents that have a field with exact same value, i.e. there is a field for Contractor Name and I want to create a view that lists each Contractor and the documents that relevant to each. How do I do this? I have tried view formulas like the following but no success as yet
SELECT #IsAvailable(Contractorid) & #Count(Contractorid) > 1
SELECT #Count(#IsAvailable(Contractorid)) >1
Nsf databases are no relational databases. The count of different documents with a unique value in a specific field cannot be used to build a view selection formula.
You could write an agent, that runs through all documents and counts them and puts all with count > 1 in a folder, but this is quite a lot of LotusScript code and needs some advanced knowledge.
The other possibilit would be to categorize the view by ContractorId and add one column before that categorized column: simply use 1 as column formula and select "display totals" in the column properties as well as "hide details".
Then at least you have the information, how much documents are in each category, but unfortunately you cannot filter by it and you cannot sort by this column.
A third possibility would be to use an xpage interface, but that is even more work to do and a completely different story developmentwise.
This is similar to view to identify duplicates. My approach is to use folder.
Make a new folder with design of your view. Instead of (not working) selection formula use short LS code as an action, or QueryOpen event (make sure only one user runs the script).
The code should cooperate with another (hidden) view sorted by Contractorid. Make a ViewNavigator for that view and traverse through it with simple logic - if previous entry has the same Contractorid as the current one, put both documents into folder**. That way you will get list of all documents with duplicate Contractorid. Make sure to wipe all the current content from the folder at the start.
** This can be optimized further by slightly more complicated algorithm to handle first duplicate diferently - for more than two duplicates this algorithm makes extra calls of PutInFolder method.
I have a list of products that has two columns, product and product family.
I want to create another list that uses this first list as a lookup for one of the columns. This I can do, i.e. I create a custom column and then use the "Add from existing site columns" linko the "List Settings" page of the second list.
However, what I'd really like is that the custom column only proposes products that belong to a specific product family. I can create a View in the first list which allows me to display only the products in a specific family. However I don't see any way to specify only this view when I create the custom column.
Anyone have any ideas ?
Best regards,
Colm
If I understood you correctly you are trying to make a dynamic select field that will populate based on what the user has chosen in a select field before it. You will not be able to configure this with out of the box SharePoint. It is possible to add some javascript to a form to achieve this. I believe you can also do this in InfoPath but I am double checking that.
So - I'm making a data view that is to contain a list. This list has a field that will be used to match up against two other lists. If there is an entry for this value, it should show the value from the other list, otherwise show a link to add a new one.
So, what I need to do is make a data source consisting of the rows from list 1, and fill in the Ticket field with a value from the Tickets table matching the ID value from list 1. The same should be done for the Change Type field.
Can anyone point me in the right direction to accomplish this? I've found a few tutorials, but they seem to be for showing all the data together and not match up on any specific columns for linkage.
Thank you
What you are aiming at is not available in SharePoint out of the box.
There are two approaches you can look at:
Create your own custom lookup field template for single/multiple field
selection with some sort of field
editor. Create your own controls and
program the associated code behind
logic.
Use some existing custom solutions. One such sample is on codeplex:
SharePoint Filtered Lookup Field
I have a Person field in my custom list. I want to have a view that will show multiple fields from that Person instead of the one I had to choose when creating the Person column.
So basically I want to have one column for Person and then in the view see Name, title, email, phone. All of those are valid choices but I can only pick one right now.
I really want to avoid typing in the username lookup for each column I choose to display.
This is SP 2007
It sounds like you need to create a custom fieldtype (with a fieldcontrol) that inherits from the userfield but in viewmode renders out the different columns you need. Is that something along the lines you are looking for?
http://www.sharepointblogs.com/nicksevens/archive/2007/08/31/create-custom-field-types-for-sharepoint.aspx
Note: This link is broken
You probably want a Computed Field. Note that this is not a Calculated Column. A Computed Field is what is used to display the same data is different ways. In SharePoint there is a Title field, but there is also a "Title (linked to item with edit menu)" computed field as well as a "Title (linked to item)" computed field.
See midway down this link for more details. I'm not sure if it will have all of the power that you need, but if it does it is almost certainly what you are looking for if you don't mind getting into the Schema XML file a little.
Could you use a DataView web part for this? If it's just a question of viewing the data that might be suitable.
Came across this thread and thought I'd add a tip. This suggestion is clearly not for every use case, but may work well in situations where you're managing a list rather than allowing manual inputs (verified to work with SP 2013):
Create a spreadsheet with columns to match your SharePoint list that contains multiple profile fields. (for example: name, phone number, email address)
In the spreadsheet, enter the same email address in all of the person/group field types in that row. (e.g., boss#company.com, boss#company.com, boss#company.com)
Select and copy the row(s) you wish to transfer to SharePoint.
In SharePoint, change the list view to "Quick Edit" and paste the row(s) into the grid.
SharePoint will process each field and convert the email address to the profile value you selected during the list setup.