I want to quit a project but I can't find the button for leaving?
I want to leave the 2022_assignment1: how can I do it?
Not sure you can leave a project if you're the only owner. But the leave button is in the members list at the far-right of the table (either in Project information, or in Group information).
If it won't let you leave, you can either archive the project or delete it, in the project's Settings -> General -> Advanced section.
Related
If I had contributed in a project, for which I am not an owner or administrator, how can I get myself out of that project? I do not find the leave button as documented in issue 744.
https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/744
The project owner has stopped responding to me and I badly want myself out of it. Please help.
Updated answer for 2020:
Leaving a group automatically removes you from all projects added by that group.
At the top menu chose Groups\Your Groups. Select the group you want to leave and press leave.
Follow these steps:
On projects page select the project
On top right corner select settings button
Then select members
Finally you'll see LEAVE button here
Follow These steps
Go to the main project url, not the sub urls
E.g If the project name is hng-interns -- Go to https://gitlab.com/hng-interns instead of https://gitlab.com/hng-interns/factory
Click on the Leave group button
Click okay in the alert box that shows up.
That's all!
In new gitlab version, you can leave a project not owned by you, by following these steps:
1- Go to the project page
2- Click on Project Information at the top left corner
3- Click on members
4- Find your name among members and click on red leave button
Click Menu on the top left, Groups, Your groups.
Click on Your groups on the next page that loads.
Select Group
You will see picture similar two the second screenshot below. Instead of Withdraw Access Request you'll see Leave Group
Whenever I open any solution in VS2012 from local path (which is mapped in TFS), the files are automatically checking out. I want to disable this feature.
I tried to disconnect from TFS and to work on it, But it is closing the solution. Plesase help me out in achieving this. I didn't get this problem before when I was using VS2010
You need to unbind your project(s) from TFS source control.
Select the project or solution from the Solution Explorer
From the main menu select File->Source Control->Advanced->Change Source Control...
Select one or all projects and press the "Unbind" button on the top of the dialog
select ok to the warning popup
You can later bind the projects again, personally I don't do this so I can't say how well it works. I found some more info here
Here are the visual steps:
This brings up the dialog to select projects to bind/unbind.
I had to select one at a time.
Select "Unbind" for each project
Here's what it should look like when unbound.
You can later come back and bind the projects again and TFS will try and reconcile your changes.
Try rather change Checked-in items (Saving, Editing) to 'Prompt for check out'
Tools -> Options -> Source Control -> Enviroment -> Checked-in items
Disable the following option. It should solve your problem.
Tools -> Options -> Source Control -> Enviroment -> Get everything when a solution or project is opened
I am trying to put several existing projects in one blank solution. This solution plus existing projects then need to be added to TFS source control.
Is there any way to achieve this? I simply am not able to find out how to get this done. Adding the project to a blank solution is relatively easy. Except it only places references to the existing project, rather than adding the files to the solution.
So when checking-in at sourcecontrol, it does not recognise the projectfiles as they do not get added to the solution, just references.
How can I get this done?
I managed to figure it out.
Add projectfiles of the project to be added to the solutiondirectory.
Add a reference to existing project (the one now in your solution directory).
In Windows Explorer, rightclick on the projectmap you just added and navigate to "Team Foundation Server" --> "Add".
The showing messagebox will describe which files will be added (they should be ONLY projectfiles, no bindirectory or anything).
Then reopen the solution in Visual Studio and the project should appear to be in source control.
Edit: The changes to show up in the pending-changeswindow, you just have to add them manually. They should show as "detected". Select these to be promoted and you should be able to check them in.
I'm working in TFS with my team for project and the problem occurs when I'm trying to make new modeling project for my classes, it doesn't show up in pending changes.
So here is how I go:
First I enter my folder where I keep my classes. I've tried from there many combinations: I've tried first right-clicking on my folder and putting "check-out for edit" and then continued to * (see later); next I've tried clicking on .csproj of my classes so I activate my project when I'll be adding modeling project and then moved to *; last I tried to activate whole solution of our whole projects which is connecting them and then to moved to *.
None of it worked. (I was always having last version)
here is what I did next for all the possibilities:
I went to Architecture -> New diagram (named diagram and left create new project) -> Create (then windows shows up for creating new project in which folder and I always select my folder where I keep my classes).
After when that was done, I went to check to "pending changes" in Team Explorer, because there should be some available since I created already Modeling project. But there was none. Since I couldn't do it like that, the last solution how I made it was by right-clicking to Source-control Explorer on my project and going to Add items to folder and selected my project which was created locally where I wanted it to be created.
But, this last solution was giving me errors while trying to open my modeling project after. I know I should activate first modeling project, so I clicked to .modelproj and while clicking to it, it was giving me this "notice" or rather "warning":
The solution you have opened is under source control but not currently configured for integrated source control in Visual Studio. Would you like to bind this solution to source control now?
--
What am I doing wrong? Why solutions are not integrated by default while creating my project (my friends are doing it automatically, they don't need to right-click in Source Control Explorer to add item to be able to see pending changes)?
I hope I made myself understandable.
It looks like your solution binding is broken. Either click yes on the question to bind your solution to source control, this is information that must be stored in the solution file and while Visual Studio does see that the folder is mapped to source control, it also sees that your solution isn't (did you check the add solution to source control checkbox when you created it?)
Optionally try opening file -> Source Control -> (optionally) Advanced -> Manage Source Control. You can select project in your solution individually and then click the bind button on the toolbar to bind them to sourcecontrol manually.
I had a similar issue and, in my case, the solution was to right click on my project and choose Source Control->Go online. Apparently I must have somehow been switched to the offline mode.
I have successfully checked in files from source control explorer instead of solution explorer in this case. Then after that it has worked again
VIEW > Other Windows > Source Control Explorer
Other way to do it:
File--> Source Control --> Advance --> Change Source Control.
In the window displayed select all the projects you want to bind to the TFS
I had the same issue and solve it by clicking:
File -> Source Control -> Advanced -> Refresh Status
In VS2013+, you can check if your solution is online. In my case, due to VSO service outage, my solutions went offline. I had to open the solution, File > Source Control > Go Online.
I am coding in Dreamweaver for a change. Is there a way to place reminders in your code, for example in the form of a "todo list"?
I know Eclipse has this option. You can place //TODO before the line of code and the marker is placed in a list. You can view this list at will and conveniently go back to the exact spot later.
After weeks of coding I sometimes forget to take care of certain things. A todo list in the code itself would really help out, anyone know of a method for this in Dreamweaver?
Dreamweaver doesn't have a dedicated interface for viewing TODO items. However, it does have what it calls Design Notes. These notes are stored in *.mno files that are within _notes folders within the folder of the file that has a design note attached to it. These files and folders are only viewable within Dreamweaver if you have Show Hidden files enabled, which you can do by accessing the Files panel options menu on the upper right by clicking on it, then selecting View -> Show hidden files.
You have to turn them on in the site definition, although by default, a Dreamweaver site will have them turned on. The following steps are for Dreamweaver CS4:
Site -> Manage Sites..., Select the site, click Edit, select the Design notes category, check maintain design notes. Next go to the File View Columns category and make sure that the Notes column is displayed. Click OK then Done.
You can also opt to share these design notes, which means the they will be uploaded when you FTP the files to the remote site, so that others that you work with when they download the file (and assuming they also have Design notes enabled and shared), then they will be able to see that a file has a design note associated with it. Note: These *.mno files are plain text and if you your server may be accessible by others, so be sure not to put anything confidential in them.
In the Files panel, right-click on a file that you want to add a TODO item to, select "Design Notes...". In the interface that opens, you can enter in a free form note for the document. Check the Show when file is opened to cause this interface to open when you open up the file you're applying the design note to.
If you switch to the All Info tab, you can add "keyed" notes, that is a note with a name, and an associated value. This open may be good for TODO items.
When you add a design note to a file and you have the Notes column displayed, you should see an icon in the Notes column for any files that have associated notes for. Double clicking this icon will open up the Design Notes UI. This will be a quick way to determine if you have any TODOs in the files that you can see. Note: you won't see this icon for files within folders that are closed.
If you would like to do some searches or listing of files with design notes associated with them, then you can take a look at the Site Reports Design Notes report. Go to Window -> Results -> Site Reports. In the upper right of this panel, click the green arrow. This brings up the Reports interface. Select the appropriate option under Report on, and then check "Design Notes" under Workflow. Don't bother with the report settings....it's supposed to allow for some search/filtering, but I can't get it not to display all files with notes associated with them, perhaps you'll have better luck. Click the Run button and the Site Reports panel should contain a list of files that have design notes associated with them, as well as the design note info for the file. If you double click the entry, then the file will open.
Well, i use to put a simply comment like this below, directly in the php code:
//TODO: something to do here.
When i need to check my todo list, just search in the site by "//TODO:", and voilá, this is my todo list! It works, it's free and well according with KISS requirements.
Try using doxygen to document your code.
anything marks with a #todo, will be put in a special page when you generate documentaion.
Not ideal but the best i can think of.
(I haven't had much experience with dream weaver - it might have the feature you are looking for IDK)